From d75f3d92e86e65b3cb9725e65f7278cc303511db Mon Sep 17 00:00:00 2001 From: Brian Lilly Date: Thu, 13 Jun 2013 15:43:45 +0200 Subject: [PATCH] ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree The CFA-10057 is a breakout board for the CFA-10036 that has Ethernet, USB and a 4.3" LCD screen on it. Signed-off-by: Brian Lilly Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx28-cfa10057.dts | 191 +++++++++++++++++++++++++++ arch/arm/mach-mxs/mach-mxs.c | 3 +- 3 files changed, 194 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx28-cfa10057.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c80151331f4f..225d93964a4f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-cfa10055.dtb \ + imx28-cfa10057.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts new file mode 100644 index 000000000000..2da713cdb42a --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -0,0 +1,191 @@ +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10057 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10057 Board"; + compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10057 + &hog_pins_cfa10057_pullup>; + + hog_pins_cfa10057: hog-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + hog_pins_cfa10057_pullup: hog-10057-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + }; + }; + + apbx@80040000 { + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; + }; + + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; +}; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index f9fe0c539031..ba227cb2c93b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -479,7 +479,8 @@ static void __init mxs_machine_init(void) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10037") || of_machine_is_compatible("crystalfontz,cfa10049") || - of_machine_is_compatible("crystalfontz,cfa10055")) + of_machine_is_compatible("crystalfontz,cfa10055") || + of_machine_is_compatible("crystalfontz,cfa10057")) crystalfontz_init(); of_platform_populate(NULL, of_default_bus_match_table, -- 2.20.1