From d7558148084de03e5a87b5d2e602de048ac1a476 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 22 Aug 2012 18:40:21 +0900 Subject: [PATCH] treewide: fix typo of "suppport" in various comments Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- arch/ia64/kvm/kvm-ia64.c | 2 +- drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 2 +- drivers/net/wireless/zd1211rw/zd_chip.c | 2 +- drivers/scsi/bnx2fc/bnx2fc_hwi.c | 2 +- drivers/usb/gadget/at91_udc.c | 2 +- sound/pci/emu10k1/emu10k1_patch.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 8b3a9c0e771d..0a88cb5d316d 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1,5 +1,5 @@ /* - * kvm_ia64.c: Basic KVM suppport On Itanium series processors + * kvm_ia64.c: Basic KVM support On Itanium series processors * * * Copyright (C) 2007, Intel Corporation. diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 9089d00f1421..14e30515f6aa 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev, /* apply any specific unsupported masks here */ switch (hw->device_id) { case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: - /* KSP3 does not suppport UCAST wake-ups */ + /* KSP3 does not support UCAST wake-ups */ wol->supported &= ~WAKE_UCAST; if (adapter->wol & E1000_WUFC_EX) diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index ff306d763e37..71ab320fae82 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip) if (r) goto out; /* Currently we support IEEE 802.11g for full and high speed USB. - * It might be discussed, whether we should suppport pure b mode for + * It might be discussed, whether we should support pure b mode for * full speed USB. */ r = set_mandatory_rates(chip, 1); diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c index 6d6eee42ac7d..ef60afa94d0e 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c +++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c @@ -296,7 +296,7 @@ int bnx2fc_send_session_ofld_req(struct fcoe_port *port, ofld_req3.flags |= (interface->vlan_enabled << FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG_SHIFT); - /* C2_VALID and ACK flags are not set as they are not suppported */ + /* C2_VALID and ACK flags are not set as they are not supported */ /* Initialize offload request 4 structure */ diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 89d90b5fb787..6992d35c5e39 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -51,7 +51,7 @@ * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * - * This driver expects the board has been wired with two GPIOs suppporting + * This driver expects the board has been wired with two GPIOs supporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the * testing hasn't covered such cases.) * diff --git a/sound/pci/emu10k1/emu10k1_patch.c b/sound/pci/emu10k1/emu10k1_patch.c index e10f027bde03..662a45876a8b 100644 --- a/sound/pci/emu10k1/emu10k1_patch.c +++ b/sound/pci/emu10k1/emu10k1_patch.c @@ -123,7 +123,7 @@ snd_emu10k1_sample_new(struct snd_emux *rec, struct snd_sf_sample *sp, offset += size; data += size; -#if 0 /* not suppported yet */ +#if 0 /* not supported yet */ /* handle reverse (or bidirectional) loop */ if (sp->v.mode_flags & (SNDRV_SFNT_SAMPLE_BIDIR_LOOP|SNDRV_SFNT_SAMPLE_REVERSE_LOOP)) { /* copy loop in reverse */ -- 2.20.1