From d707572695e47aae3ac5eb92abb9d2a8c40f7a4e Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 4 Dec 2006 12:53:11 +0100 Subject: [PATCH] [ARM] 3975/1: AT91: Comments in atmel_serial.h Updated some of the comments in the atmel_serial.h header detailing which bits are only available on the AT91RM9200 or the AT91SAM9xx processors. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- drivers/serial/atmel_serial.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h index eced2ad1a8d9..fe1763b2a6d5 100644 --- a/drivers/serial/atmel_serial.h +++ b/drivers/serial/atmel_serial.h @@ -31,8 +31,8 @@ #define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ #define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ #define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ +#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ +#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ #define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ #define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ @@ -92,9 +92,9 @@ #define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ #define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ #define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ +#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ +#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ #define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ #define ATMEL_US_RI (1 << 20) /* RI */ #define ATMEL_US_DSR (1 << 21) /* DSR */ @@ -106,6 +106,7 @@ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ -- 2.20.1