From d5b5746bed1023e4a55f96405422d3e51968fa43 Mon Sep 17 00:00:00 2001 From: John Holland Date: Fri, 19 Feb 2010 23:11:04 +0100 Subject: [PATCH] [ARM] eSATA SheevaPlug: correlate MPP to SD CD and SD WP Accept SD CD and SD WP in accordance to http://plugcomputer.org/data/docs/Sheeva-PowerPlug-V1.3-GTI-090906.pdf on MPP 47 and 44 respectively on the eSATA SheevaPlug Signed-off-by: John Holland Signed-off-by: Nicolas Pitre -- --- arch/arm/mach-kirkwood/sheevaplug-setup.c | 26 +++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index bb9bc70381ef..a00879d34d54 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -51,6 +51,11 @@ static struct mvsdio_platform_data sheevaplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; +static struct mvsdio_platform_data sheeva_esata_mvsdio_data = { + .gpio_write_protect = 44, /* MPP44 used as SD write protect */ + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + static struct gpio_led sheevaplug_led_pins[] = { { .name = "plug:green:health", @@ -79,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = { 0 }; +static unsigned int sheeva_esata_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP44_GPIO, /* SD Write Protect */ + MPP47_GPIO, /* SD Card Detect */ + MPP49_GPIO, /* LED Green */ + 0 +}; + static void __init sheevaplug_init(void) { /* * Basic setup. Needs to be called early. */ kirkwood_init(); - kirkwood_mpp_conf(sheevaplug_mpp_config); + + /* setup gpio pin select */ + if (machine_is_sheeva_esata()) + kirkwood_mpp_conf(sheeva_esata_mpp_config); + else + kirkwood_mpp_conf(sheevaplug_mpp_config); kirkwood_uart0_init(); kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25); @@ -101,7 +119,11 @@ static void __init sheevaplug_init(void) if (machine_is_sheeva_esata()) kirkwood_sata_init(&sheeva_esata_sata_data); - kirkwood_sdio_init(&sheevaplug_mvsdio_data); + /* enable sd wp and sd cd on plugs with esata */ + if (machine_is_sheeva_esata()) + kirkwood_sdio_init(&sheeva_esata_mvsdio_data); + else + kirkwood_sdio_init(&sheevaplug_mvsdio_data); platform_device_register(&sheevaplug_leds); } -- 2.20.1