From d58153d86589b6bba2dd19f4c178252f8cf2ed4f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jul 2007 16:07:09 +0100 Subject: [PATCH] [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c Create the initial arch/arm/plat-s3c directory and start linking it into the arch/arm build heirarchy ready to receive the generic parts of the S3C24XX support to be used when adding S3C6400 devices. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/plat-s3c/Kconfig | 76 +++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/Kconfig | 60 +-------------------------- 3 files changed, 78 insertions(+), 59 deletions(-) create mode 100644 arch/arm/plat-s3c/Kconfig diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a44c6da9bf8..950de3644f1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -432,6 +432,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig new file mode 100644 index 00000000000..21435c2c26a --- /dev/null +++ b/arch/arm/plat-s3c/Kconfig @@ -0,0 +1,76 @@ +# arch/arm/plat-s3c/Kconfig +# +# Copyright 2007 Simtec Electronics +# +# Licensed under GPLv2 + +config PLAT_S3C + bool + depends on ARCH_S3C2410 + default y if ARCH_S3C2410 + select NO_IOPORT + help + Base platform code for any Samsung S3C device + +comment "Boot options" + +config S3C2410_BOOT_WATCHDOG + bool "S3C2410 Initialisation watchdog" + depends on PLAT_S3C && S3C2410_WATCHDOG + help + Say y to enable the watchdog during the kernel decompression + stage. If the kernel fails to uncompress, then the watchdog + will trigger a reset and the system should restart. + +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on PLAT_S3C + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + +comment "Power management" + +config S3C2410_PM_DEBUG + bool "S3C2410 PM Suspend debug" + depends on PLAT_S3C && PM + help + Say Y here if you want verbose debugging from the PM Suspend and + Resume code. See + for more information. + +config S3C2410_PM_CHECK + bool "S3C2410 PM Suspend Memory CRC" + depends on PLAT_S3C && PM && CRC32 + help + Enable the PM code's memory area checksum over sleep. This option + will generate CRCs of all blocks of memory, and store them before + going to sleep. The blocks are then checked on resume for any + errors. + + Note, this can take several seconds depending on memory size + and CPU speed. + + See + +config S3C2410_PM_CHECK_CHUNKSIZE + int "S3C2410 PM Suspend CRC Chunksize (KiB)" + depends on PLAT_S3C && PM && S3C2410_PM_CHECK + default 64 + help + Set the chunksize in Kilobytes of the CRC for checking memory + corruption over suspend and resume. A smaller value will mean that + the CRC data block will take more memory, but wil identify any + faults with better precision. + + See + +config S3C2410_LOWLEVEL_UART_PORT + int "S3C2410 UART to use for low-level messages" + depends on PLAT_S3C + default 0 + help + Choice of which UART port to use for the low-level messages, + such as the `Uncompressing...` at start time. The value of + this configuration should be between zero and two. The port + must have been initialised by the boot-loader before use. diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index b972f36d547..b66fb3c4e22 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -10,7 +10,7 @@ config PLAT_S3C24XX default y if ARCH_S3C2410 select NO_IOPORT help - Base platform code for any Samsung S3C device + Base platform code for any Samsung S3C24XX device if PLAT_S3C24XX @@ -26,64 +26,6 @@ config PM_SIMTEC Common power management code for systems that are compatible with the Simtec style of power management -config S3C2410_BOOT_WATCHDOG - bool "S3C2410 Initialisation watchdog" - depends on ARCH_S3C2410 && S3C2410_WATCHDOG - help - Say y to enable the watchdog during the kernel decompression - stage. If the kernel fails to uncompress, then the watchdog - will trigger a reset and the system should restart. - -config S3C2410_BOOT_ERROR_RESET - bool "S3C2410 Reboot on decompression error" - depends on ARCH_S3C2410 - help - Say y here to use the watchdog to reset the system if the - kernel decompressor detects an error during decompression. - -config S3C2410_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on ARCH_S3C2410 && PM - help - Say Y here if you want verbose debugging from the PM Suspend and - Resume code. See - for more information. - -config S3C2410_PM_CHECK - bool "S3C2410 PM Suspend Memory CRC" - depends on ARCH_S3C2410 && PM && CRC32 - help - Enable the PM code's memory area checksum over sleep. This option - will generate CRCs of all blocks of memory, and store them before - going to sleep. The blocks are then checked on resume for any - errors. - - Note, this can take several seconds depending on memory size - and CPU speed. - - See - -config S3C2410_PM_CHECK_CHUNKSIZE - int "S3C2410 PM Suspend CRC Chunksize (KiB)" - depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK - default 64 - help - Set the chunksize in Kilobytes of the CRC for checking memory - corruption over suspend and resume. A smaller value will mean that - the CRC data block will take more memory, but wil identify any - faults with better precision. - - See - -config S3C2410_LOWLEVEL_UART_PORT - int "S3C2410 UART to use for low-level messages" - default 0 - help - Choice of which UART port to use for the low-level messages, - such as the `Uncompressing...` at start time. The value of - this configuration should be between zero and two. The port - must have been initialised by the boot-loader before use. - config S3C2410_DMA bool "S3C2410 DMA support" depends on ARCH_S3C2410 -- 2.20.1