From d34cf0d56658ff040c707313b4a71e86a767cbc2 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 7 Sep 2015 18:24:18 +0200 Subject: [PATCH] ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC so the pinmux configuration for the GPIO connected to the IRQ line of the LAN chip should not be defined in the IGEP common dtsi but in the one common to the IGEPv2 boards. While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg. Suggested-by: Ladislav Michl Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 6 ------ arch/arm/boot/dts/omap3-igep0020-common.dtsi | 6 ++++++ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d5e5cd449b16..2230e1c03320 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -78,12 +78,6 @@ >; }; - smsc9221_pins: pinmux_smsc9221_pins { - pinctrl-single,pins = < - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - >; - }; - i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index e458c2185e3c..5ad688c57a00 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -156,6 +156,12 @@ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ >; }; + + smsc9221_pins: pinmux_smsc9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; }; &omap3_pmx_core2 { -- 2.20.1