From d20edc0bca5577bab38acb5b190619c922ddebf8 Mon Sep 17 00:00:00 2001 From: Xiaochen Shen Date: Sun, 2 Feb 2020 05:59:30 +0800 Subject: [PATCH] x86/resctrl: Fix use-after-free when deleting resource groups commit b8511ccc75c033f6d54188ea4df7bf1e85778740 upstream. A resource group (rdtgrp) contains a reference count (rdtgrp->waitcount) that indicates how many waiters expect this rdtgrp to exist. Waiters could be waiting on rdtgroup_mutex or some work sitting on a task's workqueue for when the task returns from kernel mode or exits. The deletion of a rdtgrp is intended to have two phases: (1) while holding rdtgroup_mutex the necessary cleanup is done and rdtgrp->flags is set to RDT_DELETED, (2) after releasing the rdtgroup_mutex, the rdtgrp structure is freed only if there are no waiters and its flag is set to RDT_DELETED. Upon gaining access to rdtgroup_mutex or rdtgrp, a waiter is required to check for the RDT_DELETED flag. When unmounting the resctrl file system or deleting ctrl_mon groups, all of the subdirectories are removed and the data structure of rdtgrp is forcibly freed without checking rdtgrp->waitcount. If at this point there was a waiter on rdtgrp then a use-after-free issue occurs when the waiter starts running and accesses the rdtgrp structure it was waiting on. See kfree() calls in [1], [2] and [3] in these two call paths in following scenarios: (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp() There are several scenarios that result in use-after-free issue in following: Scenario 1: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdt_kill_sb() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue. Thread 1 (rdtgroup_tasks_write) Thread 2 (rdt_kill_sb) ------------------------------- ---------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) mutex_lock rmdir_all_sub /* * sentry and rdtgrp are freed * without checking refcount */ free_all_child_rdtgrp kfree(sentry)*[1] kfree(rdtgrp)*[2] mutex_unlock /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [1] or [2]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) Scenario 2: ----------- In Thread 1, rdtgroup_tasks_write() adds a task_work callback move_myself(). If move_myself() is scheduled to execute after Thread 2 rdtgroup_rmdir() is finished, referring to earlier rdtgrp memory (rdtgrp->waitcount) which was already freed in Thread 2 results in use-after-free issue. Thread 1 (rdtgroup_tasks_write) Thread 2 (rdtgroup_rmdir) ------------------------------- ------------------------- rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_move_task __rdtgroup_move_task /* * Take an extra refcount, so rdtgrp cannot be freed * before the call back move_myself has been invoked */ atomic_inc(&rdtgrp->waitcount) /* Callback move_myself will be scheduled for later */ task_work_add(move_myself) rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp /* * sentry is freed without * checking refcount */ kfree(sentry)*[3] rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED rdtgroup_kn_unlock mutex_unlock atomic_dec_and_test( &rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) /* * Callback is scheduled to execute * after rdt_kill_sb is finished */ move_myself /* * Use-after-free: refer to earlier rdtgrp * memory which was freed in [3]. */ atomic_dec_and_test(&rdtgrp->waitcount) && (flags & RDT_DELETED) kfree(rdtgrp) If CONFIG_DEBUG_SLAB=y, Slab corruption on kmalloc-2k can be observed like following. Note that "0x6b" is POISON_FREE after kfree(). The corrupted bits "0x6a", "0x64" at offset 0x424 correspond to waitcount member of struct rdtgroup which was freed: Slab corruption (Not tainted): kmalloc-2k start=ffff9504c5b0d000, len=2048 420: 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkjkkkkkkkkkkk Single bit error detected. Probably bad RAM. Run memtest86+ or a similar memory test tool. Next obj: start=ffff9504c5b0d800, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Slab corruption (Not tainted): kmalloc-2k start=ffff9504c58ab800, len=2048 420: 6b 6b 6b 6b 64 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkdkkkkkkkkkkk Prev obj: start=ffff9504c58ab000, len=2048 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Fix this by taking reference count (waitcount) of rdtgrp into account in the two call paths that currently do not do so. Instead of always freeing the resource group it will only be freed if there are no waiters on it. If there are waiters, the resource group will have its flags set to RDT_DELETED. It will be left to the waiter to free the resource group when it starts running and finding that it was the last waiter and the resource group has been removed (rdtgrp->flags & RDT_DELETED) since. (1) rdt_kill_sb() -> rmdir_all_sub() -> free_all_child_rdtgrp() (2) rdtgroup_rmdir() -> rdtgroup_rmdir_ctrl() -> free_all_child_rdtgrp() Backporting notes: Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c in older stable trees. Fixes: f3cbeacaa06e ("x86/intel_rdt/cqm: Add rmdir support") Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system") Suggested-by: Reinette Chatre Signed-off-by: Xiaochen Shen Signed-off-by: Borislav Petkov Reviewed-by: Reinette Chatre Reviewed-by: Tony Luck Acked-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1578500886-21771-2-git-send-email-xiaochen.shen@intel.com Signed-off-by: Sasha Levin --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 2dae1b3c42fc..734996904dc3 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -1260,7 +1260,11 @@ static void free_all_child_rdtgrp(struct rdtgroup *rdtgrp) list_for_each_entry_safe(sentry, stmp, head, mon.crdtgrp_list) { free_rmid(sentry->mon.rmid); list_del(&sentry->mon.crdtgrp_list); - kfree(sentry); + + if (atomic_read(&sentry->waitcount) != 0) + sentry->flags = RDT_DELETED; + else + kfree(sentry); } } @@ -1294,7 +1298,11 @@ static void rmdir_all_sub(void) kernfs_remove(rdtgrp->kn); list_del(&rdtgrp->rdtgroup_list); - kfree(rdtgrp); + + if (atomic_read(&rdtgrp->waitcount) != 0) + rdtgrp->flags = RDT_DELETED; + else + kfree(rdtgrp); } /* Notify online CPUs to update per cpu storage and PQR_ASSOC MSR */ update_closid_rmid(cpu_online_mask, &rdtgroup_default); -- 2.20.1