From d1ef28900d6607ea7a25c39a3bd1ce152f6ab24a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 May 2017 19:23:12 +0200 Subject: [PATCH] PCI: faraday: Add clock bindings The Faraday FTPCI100 controller has two clock ports, PCLK and PCICLK. Add bindings for these two clocks so we can assign them in the device tree. Signed-off-by: Linus Walleij Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- Documentation/devicetree/bindings/pci/faraday,ftpci100.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt index 35d4a979bb7b..89a84f8aa621 100644 --- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt @@ -30,6 +30,13 @@ Mandatory properties: 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as pre-fetchable. +Optional properties: +- clocks: when present, this should contain the peripheral clock (PCLK) and the + PCI clock (PCICLK). If these are not present, they are assumed to be + hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. +- clock-names: when present, this should contain "PCLK" for the peripheral + clock and "PCICLK" for the PCI-side clock. + Mandatory subnodes: - For "faraday,ftpci100" a node representing the interrupt-controller inside the host bridge is mandatory. It has the following mandatory properties: -- 2.20.1