From d1d3a1a1d745095261d4a927c0c06588e5bc7f6f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 22 Jul 2015 17:04:47 +0200 Subject: [PATCH] ARM: rockchip: set correct stabilization thresholds in suspend Currently the stabilization thresholds for the oscillator and external pmu are statically set to 30ms based on a 32kHz clock rate. This leaves out the case when we don't switch to the 32kHz clock when only entering the shallow suspend mode where the logic keeps running. So, set the correct threshold after we have determined if we switch to the 32kHz clock or stay with the 24MHz one. Also set the oscillator- stabilization to 0 if it is kept running during suspend, as it of course does not need to stabilize then. Reported-by: Chris Zhong Signed-off-by: Heiko Stuebner Reviewed-by: Chris Zhong Tested-by: Chris Zhong Reviewed-by: Douglas Anderson --- arch/arm/mach-rockchip/pm.c | 22 +++++++++++++++++++--- arch/arm/mach-rockchip/pm.h | 4 ---- 2 files changed, 19 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 2ca1170da5d6..c11a30b1d980 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -145,6 +145,19 @@ static void rk3288_slp_mode_set(int level) mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) | BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA); + + /* + * In deep suspend we use PMU_PMU_USE_LF to let the rk3288 + * switch its main clock supply to the alternative 32kHz + * source. Therefore set 30ms on a 32kHz clock for pmic + * stabilization. Similar 30ms on 24MHz for the other + * mode below. + */ + regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30); + + /* only wait for stabilization, if we turned the osc off */ + regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, + osc_disable ? 32 * 30 : 0); } else { /* * arm off, logic normal @@ -152,6 +165,12 @@ static void rk3288_slp_mode_set(int level) * wakeup will be error */ mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN); + + /* 30ms on a 24MHz clock for pmic stabilization */ + regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30); + + /* oscillator is still running, so no need to wait */ + regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 0); } regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set); @@ -262,9 +281,6 @@ static int rk3288_suspend_init(struct device_node *np) memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, rk3288_bootram_sz); - regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH); - regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH); - return 0; } diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h index b6494c2bd761..8a55ee2298f8 100644 --- a/arch/arm/mach-rockchip/pm.h +++ b/arch/arm/mach-rockchip/pm.h @@ -62,10 +62,6 @@ static inline void rockchip_suspend_init(void) /* PMU_WAKEUP_CFG1 bits */ #define PMU_ARMINT_WAKEUP_EN BIT(0) -/* wait 30ms for OSC stable and 30ms for pmic stable */ -#define OSC_STABL_CNT_THRESH (32 * 30) -#define PMU_STABL_CNT_THRESH (32 * 30) - enum rk3288_pwr_mode_con { PMU_PWR_MODE_EN = 0, PMU_CLK_CORE_SRC_GATE_EN, -- 2.20.1