From d1d372e8b7b053518599a6e397bbba0bd8d0bf48 Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Tue, 5 May 2015 11:25:54 +0200 Subject: [PATCH] net: axienet: Support for RGMII This patch adds support for the RGMII. The h/w configuration parameter C_PHY_TYPE, which represents the interface configured in the design, is used to differentiate various interfaces supported by AXI Ethernet. Signed-off-by: Srikanth Thokala Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 28b7e7d9c272..0ab607732bb4 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -925,9 +925,16 @@ static int axienet_open(struct net_device *ndev) return ret; if (lp->phy_node) { - lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + if (lp->phy_type == XAE_PHY_TYPE_GMII) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, axienet_adjust_link, 0, PHY_INTERFACE_MODE_GMII); + } else if (lp->phy_type == XAE_PHY_TYPE_RGMII_2_0) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + axienet_adjust_link, 0, + PHY_INTERFACE_MODE_RGMII_ID); + } + if (!lp->phy_dev) { dev_err(lp->dev, "of_phy_connect() failed\n"); return -ENODEV; -- 2.20.1