From d16ab3f633b75aac1cf42b00355cd9aa65033dcc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 25 Feb 2009 15:17:43 -0500 Subject: [PATCH] [libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv. This is necessary for use with the upcoming "mv_qc_issue_fis()" patch, but is being added separately here for easier code review. When using command issue via the "mv_qc_issue_fis()" mechanism, the initial ATA_BUSY bit does not show in the ATA status (shadow) register. This can confuse libata! So here we add a hook to fake ATA_BUSY for that situation, until the first time a BUSY, DRQ, or ERR bit is seen. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b74af945a2fe..542e244f37ab 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -370,6 +370,7 @@ enum { MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */ + MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -570,6 +571,7 @@ static void mv_bmdma_setup(struct ata_queued_cmd *qc); static void mv_bmdma_start(struct ata_queued_cmd *qc); static void mv_bmdma_stop(struct ata_queued_cmd *qc); static u8 mv_bmdma_status(struct ata_port *ap); +static u8 mv_sff_check_status(struct ata_port *ap); /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of @@ -619,6 +621,7 @@ static struct ata_port_operations mv6_ops = { .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + .sff_check_status = mv_sff_check_status, .sff_irq_clear = mv_sff_irq_clear, .check_atapi_dma = mv_check_atapi_dma, .bmdma_setup = mv_bmdma_setup, @@ -1284,7 +1287,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ - pp->pp_flags &= ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN); + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1790,6 +1794,33 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) mv_fill_sg(qc); } +/** + * mv_sff_check_status - fetch device status, if valid + * @ap: ATA port to fetch status from + * + * When using command issue via mv_qc_issue_fis(), + * the initial ATA_BUSY state does not show up in the + * ATA status (shadow) register. This can confuse libata! + * + * So we have a hook here to fake ATA_BUSY for that situation, + * until the first time a BUSY, DRQ, or ERR bit is seen. + * + * The rest of the time, it simply returns the ATA status register. + */ +static u8 mv_sff_check_status(struct ata_port *ap) +{ + u8 stat = ioread8(ap->ioaddr.status_addr); + struct mv_port_priv *pp = ap->private_data; + + if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) { + if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR)) + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; + else + stat = ATA_BUSY; + } + return stat; +} + /** * mv_qc_issue - Initiate a command to the host * @qc: queued command to start @@ -1811,6 +1842,8 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) u32 in_index; unsigned int port_irqs; + pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */ + switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NCQ: @@ -3038,6 +3071,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class, mv_reset_channel(hpriv, mmio, ap->port_no); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + pp->pp_flags &= + ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY); /* Workaround for errata FEr SATA#10 (part 2) */ do { -- 2.20.1