From d0b8a6f926be5109d711937a74b8d327b29470ba Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Wed, 20 Jun 2012 19:05:18 +0000 Subject: [PATCH] bnx2x: sfp+ Tx fault detection added Adds the ability to identify sfp+ modules' Tx fault, and when such occur shut down the link. Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 2 + .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 112 +++++++++++++++--- .../net/ethernet/broadcom/bnx2x/bnx2x_link.h | 1 + 3 files changed, 99 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 6b776309e0a1..e7c390c66b2a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1150,6 +1150,7 @@ struct drv_port_mb { u32 link_status; /* Driver should update this field on any link change event */ + #define LINK_STATUS_NONE (0<<0) #define LINK_STATUS_LINK_FLAG_MASK 0x00000001 #define LINK_STATUS_LINK_UP 0x00000001 #define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E @@ -1207,6 +1208,7 @@ struct drv_port_mb { #define LINK_STATUS_PFC_ENABLED 0x20000000 #define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000 + #define LINK_STATUS_SFP_TX_FAULT 0x80000000 u32 port_stx; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 91aa565d4374..9e008e4534d4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -4746,6 +4746,8 @@ void bnx2x_sync_link(struct link_params *params, vars->mac_type = MAC_TYPE_NONE; if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) + vars->phy_flags |= PHY_SFP_TX_FAULT_FLAG; } } @@ -12925,30 +12927,41 @@ static void bnx2x_check_over_curr(struct link_params *params, vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; } -static void bnx2x_analyze_link_error(struct link_params *params, - struct link_vars *vars, u32 lss_status, - u8 notify) +/* Returns 0 if no change occured since last check; 1 otherwise. */ +static u8 bnx2x_analyze_link_error(struct link_params *params, + struct link_vars *vars, u32 status, + u32 phy_flag, u32 link_flag, u8 notify) { struct bnx2x *bp = params->bp; /* Compare new value with previous value */ u8 led_mode; - u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0; + u32 old_status = (vars->phy_flags & phy_flag) ? 1 : 0; - if ((lss_status ^ half_open_conn) == 0) - return; + if ((status ^ old_status) == 0) + return 0; /* If values differ */ - DP(NETIF_MSG_LINK, "Link changed:%x %x->%x\n", vars->link_up, - half_open_conn, lss_status); + switch (phy_flag) { + case PHY_HALF_OPEN_CONN_FLAG: + DP(NETIF_MSG_LINK, "Analyze Remote Fault\n"); + break; + case PHY_SFP_TX_FAULT_FLAG: + DP(NETIF_MSG_LINK, "Analyze TX Fault\n"); + break; + default: + DP(NETIF_MSG_LINK, "Analyze UNKOWN\n"); + } + DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up, + old_status, status); /* a. Update shmem->link_status accordingly * b. Update link_vars->link_up */ - if (lss_status) { - DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n"); + if (status) { vars->link_status &= ~LINK_STATUS_LINK_UP; + vars->link_status |= link_flag; vars->link_up = 0; - vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->phy_flags |= phy_flag; /* activate nig drain */ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 1); @@ -12957,10 +12970,10 @@ static void bnx2x_analyze_link_error(struct link_params *params, */ led_mode = LED_MODE_OFF; } else { - DP(NETIF_MSG_LINK, "Remote Fault cleared\n"); vars->link_status |= LINK_STATUS_LINK_UP; + vars->link_status &= ~link_flag; vars->link_up = 1; - vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->phy_flags &= ~phy_flag; led_mode = LED_MODE_OPER; /* Clear nig drain */ @@ -12977,6 +12990,8 @@ static void bnx2x_analyze_link_error(struct link_params *params, vars->periodic_flags |= PERIODIC_FLAGS_LINK_EVENT; if (notify) bnx2x_notify_link_changed(bp); + + return 1; } /****************************************************************************** @@ -13018,7 +13033,9 @@ int bnx2x_check_half_open_conn(struct link_params *params, if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS)) lss_status = 1; - bnx2x_analyze_link_error(params, vars, lss_status, notify); + bnx2x_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); } else if (REG_RD(bp, MISC_REG_RESET_REG_2) & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) { /* Check E1X / E2 BMAC */ @@ -13035,11 +13052,55 @@ int bnx2x_check_half_open_conn(struct link_params *params, REG_RD_DMAE(bp, mac_base + lss_status_reg, wb_data, 2); lss_status = (wb_data[0] > 0); - bnx2x_analyze_link_error(params, vars, lss_status, notify); + bnx2x_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); } return 0; } +static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars) +{ + struct bnx2x *bp = params->bp; + u32 cfg_pin, value = 0; + u8 led_change, port = params->port; + /* Get The SFP+ TX_Fault controlling pin ([eg]pio) */ + cfg_pin = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_TX_FAULT_MASK) >> + PORT_HW_CFG_E3_TX_FAULT_SHIFT; + + if (bnx2x_get_cfg_pin(bp, cfg_pin, &value)) { + DP(NETIF_MSG_LINK, "Failed to read pin 0x%02x\n", cfg_pin); + return; + } + + led_change = bnx2x_analyze_link_error(params, vars, value, + PHY_SFP_TX_FAULT_FLAG, + LINK_STATUS_SFP_TX_FAULT, 1); + + if (led_change) { + /* Change TX_Fault led, set link status for further syncs */ + u8 led_mode; + + if (vars->phy_flags & PHY_SFP_TX_FAULT_FLAG) { + led_mode = MISC_REGISTERS_GPIO_HIGH; + vars->link_status |= LINK_STATUS_SFP_TX_FAULT; + } else { + led_mode = MISC_REGISTERS_GPIO_LOW; + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + } + + /* If module is unapproved, led should be on regardless */ + if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) { + DP(NETIF_MSG_LINK, "Change TX_Fault LED: ->%x\n", + led_mode); + bnx2x_set_e3_module_fault_led(params, led_mode); + } + } +} void bnx2x_period_func(struct link_params *params, struct link_vars *vars) { u16 phy_idx; @@ -13058,7 +13119,26 @@ void bnx2x_period_func(struct link_params *params, struct link_vars *vars) struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; bnx2x_set_aer_mmd(params, phy); bnx2x_check_over_curr(params, vars); - bnx2x_warpcore_config_runtime(phy, params, vars); + if (vars->rx_tx_asic_rst) + bnx2x_warpcore_config_runtime(phy, params, vars); + + if ((REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port].default_cfg)) + & PORT_HW_CFG_NET_SERDES_IF_MASK) == + PORT_HW_CFG_NET_SERDES_IF_SFI) { + if (bnx2x_is_sfp_module_plugged(phy, params)) { + bnx2x_sfp_tx_fault_detection(phy, params, vars); + } else if (vars->link_status & + LINK_STATUS_SFP_TX_FAULT) { + /* Clean trail, interrupt corrects the leds */ + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG; + /* Update link status in the shared memory */ + bnx2x_update_mng(params, vars->link_status); + } + } + } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index e920800a7bc5..cd1f2719b62d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -307,6 +307,7 @@ struct link_vars { #define PHY_PHYSICAL_LINK_FLAG (1<<2) #define PHY_HALF_OPEN_CONN_FLAG (1<<3) #define PHY_OVER_CURRENT_FLAG (1<<4) +#define PHY_SFP_TX_FAULT_FLAG (1<<5) u8 mac_type; #define MAC_TYPE_NONE 0 -- 2.20.1