From cff97f3353b6bae09c8c5419f4294fb7fdecd656 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Wed, 19 Jul 2017 15:11:46 -0400 Subject: [PATCH] usb: bdc: fix "xsf for ep not enabled" errror This patch essentially clears the port status change bits at the correct times. It is necessary because the driver was not handling the change bits correctly for events during device connection/disconnection and bus enumeration. So, one of them (PCC) was left stuck sometimes causing the "xsf for ep not enabled" error we get on first connection. This was found by the Android team. This was debugged and fixed by Sasi Kumar. Signed-off-by: Al Cooper Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/bdc/bdc_udc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c index aae7458d8986..c84346146456 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_udc.c +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -249,6 +249,7 @@ void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport) disconn = true; else if ((uspc & BDC_PCS) && !BDC_PST(uspc)) connected = true; + clear_flags |= BDC_PCC; } /* Change in VBus and VBus is present */ @@ -259,16 +260,16 @@ void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport) bdc_softconn(bdc); usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED); } - clear_flags = BDC_VBC; + clear_flags |= BDC_VBC; } else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) { /* Hot reset, warm reset, 2.0 bus reset or disconn */ dev_dbg(bdc->dev, "Port reset or disconn\n"); bdc_uspc_disconnected(bdc, disconn); - clear_flags = BDC_PCC|BDC_PCS|BDC_PRS|BDC_PRC; + clear_flags |= BDC_PRC; } else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) { /* Change in Link state */ handle_link_state_change(bdc, uspc); - clear_flags = BDC_PSC|BDC_PCS; + clear_flags |= BDC_PSC; } /* -- 2.20.1