From cfad6425382ec81acd073fdf24361e1c30b4cb36 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 13 Jan 2017 15:16:52 +0300 Subject: [PATCH] eeprom: Add IDT 89HPESx EEPROM/CSR driver This driver provides an access to EEPROM of IDT PCIe-switches. IDT PCIe- switches expose a simple SMBus interface to perform IO-operations from/to EEPROM, which is located at private (so called Master) SMBus. The driver creates a simple binary sysfs-file to have an access to the EEPROM using the SMBus-slave interface in the i2c-device susfs-directory: /sys/bus/i2c/devices/-/eeprom In case if read-only flag is specified at dts-node of the device, User-space applications won't be able to write to the EEPROM sysfs-node. Additionally IDT 89HPESx SMBus interface has an ability to read/write values of device CSRs. This driver exposes debugfs-file to perform simple IO-operations using that ability for just basic debug purpose. Particularly the next file is created in the specific debugfs-directory: /sys/kernel/debug/idt_csr/ Format of the debugfs-file value is: $ cat /sys/kernel/debug/idt_csr/-/; : So reading the content of the file gives current CSR address and it value. If User-space application wishes to change current CSR address, it can just write a proper value to the sysfs-file: $ echo "" > /sys/kernel/debug/idt_csr/-/ If it wants to change the CSR value as well, the format of the write operation is: $ echo ":" > \ /sys/kernel/debug/idt_csr/-/; CSR address and value can be any of hexadecimal, decimal or octal format. Signed-off-by: Serge Semin Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/Kconfig | 10 + drivers/misc/eeprom/Makefile | 1 + drivers/misc/eeprom/idt_89hpesx.c | 1587 +++++++++++++++++++++++++++++ 3 files changed, 1598 insertions(+) create mode 100644 drivers/misc/eeprom/idt_89hpesx.c diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index c4e41c26649e..de58762097c4 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -100,4 +100,14 @@ config EEPROM_DIGSY_MTC_CFG If unsure, say N. +config EEPROM_IDT_89HPESX + tristate "IDT 89HPESx PCIe-swtiches EEPROM / CSR support" + depends on I2C && SYSFS + help + Enable this driver to get read/write access to EEPROM / CSRs + over IDT PCIe-swtich i2c-slave interface. + + This driver can also be built as a module. If so, the module + will be called idt_89hpesx. + endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index fc1e81d29267..90a52624ddeb 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o +obj-$(CONFIG_EEPROM_IDT_89HPESX) += idt_89hpesx.o diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c new file mode 100644 index 000000000000..25d47d09e1cb --- /dev/null +++ b/drivers/misc/eeprom/idt_89hpesx.c @@ -0,0 +1,1587 @@ +/* + * This file is provided under a GPLv2 license. When using or + * redistributing this file, you may do so under that license. + * + * GPL LICENSE SUMMARY + * + * Copyright (C) 2016 T-Platforms. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, it can be found . + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * IDT PCIe-switch NTB Linux driver + * + * Contact Information: + * Serge Semin , + */ +/* + * NOTE of the IDT 89HPESx SMBus-slave interface driver + * This driver primarily is developed to have an access to EEPROM device of + * IDT PCIe-switches. IDT provides a simple SMBus interface to perform IO- + * operations from/to EEPROM, which is located at private (so called Master) + * SMBus of switches. Using that interface this the driver creates a simple + * binary sysfs-file in the device directory: + * /sys/bus/i2c/devices/-/eeprom + * In case if read-only flag is specified in the dts-node of device desription, + * User-space applications won't be able to write to the EEPROM sysfs-node. + * Additionally IDT 89HPESx SMBus interface has an ability to write/read + * data of device CSRs. This driver exposes debugf-file to perform simple IO + * operations using that ability for just basic debug purpose. Particularly + * next file is created in the specific debugfs-directory: + * /sys/kernel/debug/idt_csr/ + * Format of the debugfs-node is: + * $ cat /sys/kernel/debug/idt_csr/-/; + * : + * So reading the content of the file gives current CSR address and it value. + * If User-space application wishes to change current CSR address, + * it can just write a proper value to the sysfs-file: + * $ echo "" > /sys/kernel/debug/idt_csr/-/ + * If it wants to change the CSR value as well, the format of the write + * operation is: + * $ echo ":" > \ + * /sys/kernel/debug/idt_csr/-/; + * CSR address and value can be any of hexadecimal, decimal or octal format. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IDT_NAME "89hpesx" +#define IDT_89HPESX_DESC "IDT 89HPESx SMBus-slave interface driver" +#define IDT_89HPESX_VER "1.0" + +MODULE_DESCRIPTION(IDT_89HPESX_DESC); +MODULE_VERSION(IDT_89HPESX_VER); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("T-platforms"); + +/* + * csr_dbgdir - CSR read/write operations Debugfs directory + */ +static struct dentry *csr_dbgdir; + +/* + * struct idt_89hpesx_dev - IDT 89HPESx device data structure + * @eesize: Size of EEPROM in bytes (calculated from "idt,eecompatible") + * @eero: EEPROM Read-only flag + * @eeaddr: EEPROM custom address + * + * @inieecmd: Initial cmd value for EEPROM read/write operations + * @inicsrcmd: Initial cmd value for CSR read/write operations + * @iniccode: Initialial command code value for IO-operations + * + * @csr: CSR address to perform read operation + * + * @smb_write: SMBus write method + * @smb_read: SMBus read method + * @smb_mtx: SMBus mutex + * + * @client: i2c client used to perform IO operations + * + * @ee_file: EEPROM read/write sysfs-file + * @csr_file: CSR read/write debugfs-node + */ +struct idt_smb_seq; +struct idt_89hpesx_dev { + u32 eesize; + bool eero; + u8 eeaddr; + + u8 inieecmd; + u8 inicsrcmd; + u8 iniccode; + + u16 csr; + + int (*smb_write)(struct idt_89hpesx_dev *, const struct idt_smb_seq *); + int (*smb_read)(struct idt_89hpesx_dev *, struct idt_smb_seq *); + struct mutex smb_mtx; + + struct i2c_client *client; + + struct bin_attribute *ee_file; + struct dentry *csr_dir; + struct dentry *csr_file; +}; + +/* + * struct idt_smb_seq - sequence of data to be read/written from/to IDT 89HPESx + * @ccode: SMBus command code + * @bytecnt: Byte count of operation + * @data: Data to by written + */ +struct idt_smb_seq { + u8 ccode; + u8 bytecnt; + u8 *data; +}; + +/* + * struct idt_eeprom_seq - sequence of data to be read/written from/to EEPROM + * @cmd: Transaction CMD + * @eeaddr: EEPROM custom address + * @memaddr: Internal memory address of EEPROM + * @data: Data to be written at the memory address + */ +struct idt_eeprom_seq { + u8 cmd; + u8 eeaddr; + u16 memaddr; + u8 data; +} __packed; + +/* + * struct idt_csr_seq - sequence of data to be read/written from/to CSR + * @cmd: Transaction CMD + * @csraddr: Internal IDT device CSR address + * @data: Data to be read/written from/to the CSR address + */ +struct idt_csr_seq { + u8 cmd; + u16 csraddr; + u32 data; +} __packed; + +/* + * SMBus command code macros + * @CCODE_END: Indicates the end of transaction + * @CCODE_START: Indicates the start of transaction + * @CCODE_CSR: CSR read/write transaction + * @CCODE_EEPROM: EEPROM read/write transaction + * @CCODE_BYTE: Supplied data has BYTE length + * @CCODE_WORD: Supplied data has WORD length + * @CCODE_BLOCK: Supplied data has variable length passed in bytecnt + * byte right following CCODE byte + */ +#define CCODE_END ((u8)0x01) +#define CCODE_START ((u8)0x02) +#define CCODE_CSR ((u8)0x00) +#define CCODE_EEPROM ((u8)0x04) +#define CCODE_BYTE ((u8)0x00) +#define CCODE_WORD ((u8)0x20) +#define CCODE_BLOCK ((u8)0x40) +#define CCODE_PEC ((u8)0x80) + +/* + * EEPROM command macros + * @EEPROM_OP_WRITE: EEPROM write operation + * @EEPROM_OP_READ: EEPROM read operation + * @EEPROM_USA: Use specified address of EEPROM + * @EEPROM_NAERR: EEPROM device is not ready to respond + * @EEPROM_LAERR: EEPROM arbitration loss error + * @EEPROM_MSS: EEPROM misplace start & stop bits error + * @EEPROM_WR_CNT: Bytes count to perform write operation + * @EEPROM_WRRD_CNT: Bytes count to write before reading + * @EEPROM_RD_CNT: Bytes count to perform read operation + * @EEPROM_DEF_SIZE: Fall back size of EEPROM + * @EEPROM_DEF_ADDR: Defatul EEPROM address + * @EEPROM_TOUT: Timeout before retry read operation if eeprom is busy + */ +#define EEPROM_OP_WRITE ((u8)0x00) +#define EEPROM_OP_READ ((u8)0x01) +#define EEPROM_USA ((u8)0x02) +#define EEPROM_NAERR ((u8)0x08) +#define EEPROM_LAERR ((u8)0x10) +#define EEPROM_MSS ((u8)0x20) +#define EEPROM_WR_CNT ((u8)5) +#define EEPROM_WRRD_CNT ((u8)4) +#define EEPROM_RD_CNT ((u8)5) +#define EEPROM_DEF_SIZE ((u16)4096) +#define EEPROM_DEF_ADDR ((u8)0x50) +#define EEPROM_TOUT (100) + +/* + * CSR command macros + * @CSR_DWE: Enable all four bytes of the operation + * @CSR_OP_WRITE: CSR write operation + * @CSR_OP_READ: CSR read operation + * @CSR_RERR: Read operation error + * @CSR_WERR: Write operation error + * @CSR_WR_CNT: Bytes count to perform write operation + * @CSR_WRRD_CNT: Bytes count to write before reading + * @CSR_RD_CNT: Bytes count to perform read operation + * @CSR_MAX: Maximum CSR address + * @CSR_DEF: Default CSR address + * @CSR_REAL_ADDR: CSR real unshifted address + */ +#define CSR_DWE ((u8)0x0F) +#define CSR_OP_WRITE ((u8)0x00) +#define CSR_OP_READ ((u8)0x10) +#define CSR_RERR ((u8)0x40) +#define CSR_WERR ((u8)0x80) +#define CSR_WR_CNT ((u8)7) +#define CSR_WRRD_CNT ((u8)3) +#define CSR_RD_CNT ((u8)7) +#define CSR_MAX ((u32)0x3FFFF) +#define CSR_DEF ((u16)0x0000) +#define CSR_REAL_ADDR(val) ((unsigned int)val << 2) + +/* + * IDT 89HPESx basic register + * @IDT_VIDDID_CSR: PCIe VID and DID of IDT 89HPESx + * @IDT_VID_MASK: Mask of VID + */ +#define IDT_VIDDID_CSR ((u32)0x0000) +#define IDT_VID_MASK ((u32)0xFFFF) + +/* + * IDT 89HPESx can send NACK when new command is sent before previous one + * fininshed execution. In this case driver retries operation + * certain times. + * @RETRY_CNT: Number of retries before giving up and fail + * @idt_smb_safe: Generate a retry loop on corresponding SMBus method + */ +#define RETRY_CNT (128) +#define idt_smb_safe(ops, args...) ({ \ + int __retry = RETRY_CNT; \ + s32 __sts; \ + do { \ + __sts = i2c_smbus_ ## ops ## _data(args); \ + } while (__retry-- && __sts < 0); \ + __sts; \ +}) + +/*=========================================================================== + * i2c bus level IO-operations + *=========================================================================== + */ + +/* + * idt_smb_write_byte() - SMBus write method when I2C_SMBUS_BYTE_DATA operation + * is only available + * @pdev: Pointer to the driver data + * @seq: Sequence of data to be written + */ +static int idt_smb_write_byte(struct idt_89hpesx_dev *pdev, + const struct idt_smb_seq *seq) +{ + s32 sts; + u8 ccode; + int idx; + + /* Loop over the supplied data sending byte one-by-one */ + for (idx = 0; idx < seq->bytecnt; idx++) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BYTE; + if (idx == 0) + ccode |= CCODE_START; + if (idx == seq->bytecnt - 1) + ccode |= CCODE_END; + + /* Send data to the device */ + sts = idt_smb_safe(write_byte, pdev->client, ccode, + seq->data[idx]); + if (sts != 0) + return (int)sts; + } + + return 0; +} + +/* + * idt_smb_read_byte() - SMBus read method when I2C_SMBUS_BYTE_DATA operation + * is only available + * @pdev: Pointer to the driver data + * @seq: Buffer to read data to + */ +static int idt_smb_read_byte(struct idt_89hpesx_dev *pdev, + struct idt_smb_seq *seq) +{ + s32 sts; + u8 ccode; + int idx; + + /* Loop over the supplied buffer receiving byte one-by-one */ + for (idx = 0; idx < seq->bytecnt; idx++) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BYTE; + if (idx == 0) + ccode |= CCODE_START; + if (idx == seq->bytecnt - 1) + ccode |= CCODE_END; + + /* Read data from the device */ + sts = idt_smb_safe(read_byte, pdev->client, ccode); + if (sts < 0) + return (int)sts; + + seq->data[idx] = (u8)sts; + } + + return 0; +} + +/* + * idt_smb_write_word() - SMBus write method when I2C_SMBUS_BYTE_DATA and + * I2C_FUNC_SMBUS_WORD_DATA operations are available + * @pdev: Pointer to the driver data + * @seq: Sequence of data to be written + */ +static int idt_smb_write_word(struct idt_89hpesx_dev *pdev, + const struct idt_smb_seq *seq) +{ + s32 sts; + u8 ccode; + int idx, evencnt; + + /* Calculate the even count of data to send */ + evencnt = seq->bytecnt - (seq->bytecnt % 2); + + /* Loop over the supplied data sending two bytes at a time */ + for (idx = 0; idx < evencnt; idx += 2) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_WORD; + if (idx == 0) + ccode |= CCODE_START; + if (idx == evencnt - 2) + ccode |= CCODE_END; + + /* Send word data to the device */ + sts = idt_smb_safe(write_word, pdev->client, ccode, + *(u16 *)&seq->data[idx]); + if (sts != 0) + return (int)sts; + } + + /* If there is odd number of bytes then send just one last byte */ + if (seq->bytecnt != evencnt) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BYTE | CCODE_END; + if (idx == 0) + ccode |= CCODE_START; + + /* Send byte data to the device */ + sts = idt_smb_safe(write_byte, pdev->client, ccode, + seq->data[idx]); + if (sts != 0) + return (int)sts; + } + + return 0; +} + +/* + * idt_smb_read_word() - SMBus read method when I2C_SMBUS_BYTE_DATA and + * I2C_FUNC_SMBUS_WORD_DATA operations are available + * @pdev: Pointer to the driver data + * @seq: Buffer to read data to + */ +static int idt_smb_read_word(struct idt_89hpesx_dev *pdev, + struct idt_smb_seq *seq) +{ + s32 sts; + u8 ccode; + int idx, evencnt; + + /* Calculate the even count of data to send */ + evencnt = seq->bytecnt - (seq->bytecnt % 2); + + /* Loop over the supplied data reading two bytes at a time */ + for (idx = 0; idx < evencnt; idx += 2) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_WORD; + if (idx == 0) + ccode |= CCODE_START; + if (idx == evencnt - 2) + ccode |= CCODE_END; + + /* Read word data from the device */ + sts = idt_smb_safe(read_word, pdev->client, ccode); + if (sts < 0) + return (int)sts; + + *(u16 *)&seq->data[idx] = (u16)sts; + } + + /* If there is odd number of bytes then receive just one last byte */ + if (seq->bytecnt != evencnt) { + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BYTE | CCODE_END; + if (idx == 0) + ccode |= CCODE_START; + + /* Read last data byte from the device */ + sts = idt_smb_safe(read_byte, pdev->client, ccode); + if (sts < 0) + return (int)sts; + + seq->data[idx] = (u8)sts; + } + + return 0; +} + +/* + * idt_smb_write_block() - SMBus write method when I2C_SMBUS_BLOCK_DATA + * operation is available + * @pdev: Pointer to the driver data + * @seq: Sequence of data to be written + */ +static int idt_smb_write_block(struct idt_89hpesx_dev *pdev, + const struct idt_smb_seq *seq) +{ + u8 ccode; + + /* Return error if too much data passed to send */ + if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END; + + /* Send block of data to the device */ + return idt_smb_safe(write_block, pdev->client, ccode, seq->bytecnt, + seq->data); +} + +/* + * idt_smb_read_block() - SMBus read method when I2C_SMBUS_BLOCK_DATA + * operation is available + * @pdev: Pointer to the driver data + * @seq: Buffer to read data to + */ +static int idt_smb_read_block(struct idt_89hpesx_dev *pdev, + struct idt_smb_seq *seq) +{ + s32 sts; + u8 ccode; + + /* Return error if too much data passed to send */ + if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END; + + /* Read block of data from the device */ + sts = idt_smb_safe(read_block, pdev->client, ccode, seq->data); + if (sts != seq->bytecnt) + return (sts < 0 ? sts : -ENODATA); + + return 0; +} + +/* + * idt_smb_write_i2c_block() - SMBus write method when I2C_SMBUS_I2C_BLOCK_DATA + * operation is available + * @pdev: Pointer to the driver data + * @seq: Sequence of data to be written + * + * NOTE It's usual SMBus write block operation, except the actual data length is + * sent as first byte of data + */ +static int idt_smb_write_i2c_block(struct idt_89hpesx_dev *pdev, + const struct idt_smb_seq *seq) +{ + u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1]; + + /* Return error if too much data passed to send */ + if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + + /* Collect the data to send. Length byte must be added prior the data */ + buf[0] = seq->bytecnt; + memcpy(&buf[1], seq->data, seq->bytecnt); + + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END; + + /* Send length and block of data to the device */ + return idt_smb_safe(write_i2c_block, pdev->client, ccode, + seq->bytecnt + 1, buf); +} + +/* + * idt_smb_read_i2c_block() - SMBus read method when I2C_SMBUS_I2C_BLOCK_DATA + * operation is available + * @pdev: Pointer to the driver data + * @seq: Buffer to read data to + * + * NOTE It's usual SMBus read block operation, except the actual data length is + * retrieved as first byte of data + */ +static int idt_smb_read_i2c_block(struct idt_89hpesx_dev *pdev, + struct idt_smb_seq *seq) +{ + u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1]; + s32 sts; + + /* Return error if too much data passed to send */ + if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + + /* Collect the command code byte */ + ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END; + + /* Read length and block of data from the device */ + sts = idt_smb_safe(read_i2c_block, pdev->client, ccode, + seq->bytecnt + 1, buf); + if (sts != seq->bytecnt + 1) + return (sts < 0 ? sts : -ENODATA); + if (buf[0] != seq->bytecnt) + return -ENODATA; + + /* Copy retrieved data to the output data buffer */ + memcpy(seq->data, &buf[1], seq->bytecnt); + + return 0; +} + +/*=========================================================================== + * EEPROM IO-operations + *=========================================================================== + */ + +/* + * idt_eeprom_read_byte() - read just one byte from EEPROM + * @pdev: Pointer to the driver data + * @memaddr: Start EEPROM memory address + * @data: Data to be written to EEPROM + */ +static int idt_eeprom_read_byte(struct idt_89hpesx_dev *pdev, u16 memaddr, + u8 *data) +{ + struct device *dev = &pdev->client->dev; + struct idt_eeprom_seq eeseq; + struct idt_smb_seq smbseq; + int ret, retry; + + /* Initialize SMBus sequence fields */ + smbseq.ccode = pdev->iniccode | CCODE_EEPROM; + smbseq.data = (u8 *)&eeseq; + + /* + * Sometimes EEPROM may respond with NACK if it's busy with previous + * operation, so we need to perform a few attempts of read cycle + */ + retry = RETRY_CNT; + do { + /* Send EEPROM memory address to read data from */ + smbseq.bytecnt = EEPROM_WRRD_CNT; + eeseq.cmd = pdev->inieecmd | EEPROM_OP_READ; + eeseq.eeaddr = pdev->eeaddr; + eeseq.memaddr = cpu_to_le16(memaddr); + ret = pdev->smb_write(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to init eeprom addr 0x%02hhx", + memaddr); + break; + } + + /* Perform read operation */ + smbseq.bytecnt = EEPROM_RD_CNT; + ret = pdev->smb_read(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to read eeprom data 0x%02hhx", + memaddr); + break; + } + + /* Restart read operation if the device is busy */ + if (retry && (eeseq.cmd & EEPROM_NAERR)) { + dev_dbg(dev, "EEPROM busy, retry reading after %d ms", + EEPROM_TOUT); + msleep(EEPROM_TOUT); + continue; + } + + /* Check whether IDT successfully read data from EEPROM */ + if (eeseq.cmd & (EEPROM_NAERR | EEPROM_LAERR | EEPROM_MSS)) { + dev_err(dev, + "Communication with eeprom failed, cmd 0x%hhx", + eeseq.cmd); + ret = -EREMOTEIO; + break; + } + + /* Save retrieved data and exit the loop */ + *data = eeseq.data; + break; + } while (retry--); + + /* Return the status of operation */ + return ret; +} + +/* + * idt_eeprom_write() - EEPROM write operation + * @pdev: Pointer to the driver data + * @memaddr: Start EEPROM memory address + * @len: Length of data to be written + * @data: Data to be written to EEPROM + */ +static int idt_eeprom_write(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len, + const u8 *data) +{ + struct device *dev = &pdev->client->dev; + struct idt_eeprom_seq eeseq; + struct idt_smb_seq smbseq; + int ret; + u16 idx; + + /* Initialize SMBus sequence fields */ + smbseq.ccode = pdev->iniccode | CCODE_EEPROM; + smbseq.data = (u8 *)&eeseq; + + /* Send data byte-by-byte, checking if it is successfully written */ + for (idx = 0; idx < len; idx++, memaddr++) { + /* Lock IDT SMBus device */ + mutex_lock(&pdev->smb_mtx); + + /* Perform write operation */ + smbseq.bytecnt = EEPROM_WR_CNT; + eeseq.cmd = pdev->inieecmd | EEPROM_OP_WRITE; + eeseq.eeaddr = pdev->eeaddr; + eeseq.memaddr = cpu_to_le16(memaddr); + eeseq.data = data[idx]; + ret = pdev->smb_write(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, + "Failed to write 0x%04hx:0x%02hhx to eeprom", + memaddr, data[idx]); + goto err_mutex_unlock; + } + + /* + * Check whether the data is successfully written by reading + * from the same EEPROM memory address. + */ + eeseq.data = ~data[idx]; + ret = idt_eeprom_read_byte(pdev, memaddr, &eeseq.data); + if (ret != 0) + goto err_mutex_unlock; + + /* Check whether the read byte is the same as written one */ + if (eeseq.data != data[idx]) { + dev_err(dev, "Values don't match 0x%02hhx != 0x%02hhx", + eeseq.data, data[idx]); + ret = -EREMOTEIO; + goto err_mutex_unlock; + } + + /* Unlock IDT SMBus device */ +err_mutex_unlock: + mutex_unlock(&pdev->smb_mtx); + if (ret != 0) + return ret; + } + + return 0; +} + +/* + * idt_eeprom_read() - EEPROM read operation + * @pdev: Pointer to the driver data + * @memaddr: Start EEPROM memory address + * @len: Length of data to read + * @buf: Buffer to read data to + */ +static int idt_eeprom_read(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len, + u8 *buf) +{ + int ret; + u16 idx; + + /* Read data byte-by-byte, retrying if it wasn't successful */ + for (idx = 0; idx < len; idx++, memaddr++) { + /* Lock IDT SMBus device */ + mutex_lock(&pdev->smb_mtx); + + /* Just read the byte to the buffer */ + ret = idt_eeprom_read_byte(pdev, memaddr, &buf[idx]); + + /* Unlock IDT SMBus device */ + mutex_unlock(&pdev->smb_mtx); + + /* Return error if read operation failed */ + if (ret != 0) + return ret; + } + + return 0; +} + +/*=========================================================================== + * CSR IO-operations + *=========================================================================== + */ + +/* + * idt_csr_write() - CSR write operation + * @pdev: Pointer to the driver data + * @csraddr: CSR address (with no two LS bits) + * @data: Data to be written to CSR + */ +static int idt_csr_write(struct idt_89hpesx_dev *pdev, u16 csraddr, + const u32 data) +{ + struct device *dev = &pdev->client->dev; + struct idt_csr_seq csrseq; + struct idt_smb_seq smbseq; + int ret; + + /* Initialize SMBus sequence fields */ + smbseq.ccode = pdev->iniccode | CCODE_CSR; + smbseq.data = (u8 *)&csrseq; + + /* Lock IDT SMBus device */ + mutex_lock(&pdev->smb_mtx); + + /* Perform write operation */ + smbseq.bytecnt = CSR_WR_CNT; + csrseq.cmd = pdev->inicsrcmd | CSR_OP_WRITE; + csrseq.csraddr = cpu_to_le16(csraddr); + csrseq.data = cpu_to_le32(data); + ret = pdev->smb_write(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to write 0x%04x: 0x%04x to csr", + CSR_REAL_ADDR(csraddr), data); + goto err_mutex_unlock; + } + + /* Send CSR address to read data from */ + smbseq.bytecnt = CSR_WRRD_CNT; + csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ; + ret = pdev->smb_write(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to init csr address 0x%04x", + CSR_REAL_ADDR(csraddr)); + goto err_mutex_unlock; + } + + /* Perform read operation */ + smbseq.bytecnt = CSR_RD_CNT; + ret = pdev->smb_read(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to read csr 0x%04x", + CSR_REAL_ADDR(csraddr)); + goto err_mutex_unlock; + } + + /* Check whether IDT successfully retrieved CSR data */ + if (csrseq.cmd & (CSR_RERR | CSR_WERR)) { + dev_err(dev, "IDT failed to perform CSR r/w"); + ret = -EREMOTEIO; + goto err_mutex_unlock; + } + + /* Unlock IDT SMBus device */ +err_mutex_unlock: + mutex_unlock(&pdev->smb_mtx); + + return ret; +} + +/* + * idt_csr_read() - CSR read operation + * @pdev: Pointer to the driver data + * @csraddr: CSR address (with no two LS bits) + * @data: Data to be written to CSR + */ +static int idt_csr_read(struct idt_89hpesx_dev *pdev, u16 csraddr, u32 *data) +{ + struct device *dev = &pdev->client->dev; + struct idt_csr_seq csrseq; + struct idt_smb_seq smbseq; + int ret; + + /* Initialize SMBus sequence fields */ + smbseq.ccode = pdev->iniccode | CCODE_CSR; + smbseq.data = (u8 *)&csrseq; + + /* Lock IDT SMBus device */ + mutex_lock(&pdev->smb_mtx); + + /* Send CSR register address before reading it */ + smbseq.bytecnt = CSR_WRRD_CNT; + csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ; + csrseq.csraddr = cpu_to_le16(csraddr); + ret = pdev->smb_write(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to init csr address 0x%04x", + CSR_REAL_ADDR(csraddr)); + goto err_mutex_unlock; + } + + /* Perform read operation */ + smbseq.bytecnt = CSR_RD_CNT; + ret = pdev->smb_read(pdev, &smbseq); + if (ret != 0) { + dev_err(dev, "Failed to read csr 0x%04hx", + CSR_REAL_ADDR(csraddr)); + goto err_mutex_unlock; + } + + /* Check whether IDT successfully retrieved CSR data */ + if (csrseq.cmd & (CSR_RERR | CSR_WERR)) { + dev_err(dev, "IDT failed to perform CSR r/w"); + ret = -EREMOTEIO; + goto err_mutex_unlock; + } + + /* Save data retrieved from IDT */ + *data = le32_to_cpu(csrseq.data); + + /* Unlock IDT SMBus device */ +err_mutex_unlock: + mutex_unlock(&pdev->smb_mtx); + + return ret; +} + +/*=========================================================================== + * Sysfs/debugfs-nodes IO-operations + *=========================================================================== + */ + +/* + * eeprom_write() - EEPROM sysfs-node write callback + * @filep: Pointer to the file system node + * @kobj: Pointer to the kernel object related to the sysfs-node + * @attr: Attributes of the file + * @buf: Buffer to write data to + * @off: Offset at which data should be written to + * @count: Number of bytes to write + */ +static ssize_t eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct idt_89hpesx_dev *pdev; + int ret; + + /* Retrieve driver data */ + pdev = dev_get_drvdata(kobj_to_dev(kobj)); + + /* Perform EEPROM write operation */ + ret = idt_eeprom_write(pdev, (u16)off, (u16)count, (u8 *)buf); + return (ret != 0 ? ret : count); +} + +/* + * eeprom_read() - EEPROM sysfs-node read callback + * @filep: Pointer to the file system node + * @kobj: Pointer to the kernel object related to the sysfs-node + * @attr: Attributes of the file + * @buf: Buffer to write data to + * @off: Offset at which data should be written to + * @count: Number of bytes to write + */ +static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct idt_89hpesx_dev *pdev; + int ret; + + /* Retrieve driver data */ + pdev = dev_get_drvdata(kobj_to_dev(kobj)); + + /* Perform EEPROM read operation */ + ret = idt_eeprom_read(pdev, (u16)off, (u16)count, (u8 *)buf); + return (ret != 0 ? ret : count); +} + +/* + * idt_dbgfs_csr_write() - CSR debugfs-node write callback + * @filep: Pointer to the file system file descriptor + * @buf: Buffer to read data from + * @count: Size of the buffer + * @offp: Offset within the file + * + * It accepts either "0x:0x" for saving register address + * and writing value to specified DWORD register or "0x" for + * just saving register address in order to perform next read operation. + * + * WARNING No spaces are allowed. Incoming string must be strictly formated as: + * ":". Register address must be aligned within 4 bytes + * (one DWORD). + */ +static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf, + size_t count, loff_t *offp) +{ + struct idt_89hpesx_dev *pdev = filep->private_data; + char *colon_ch, *csraddr_str, *csrval_str; + int ret, csraddr_len, csrval_len; + u32 csraddr, csrval; + char *buf; + + /* Copy data from User-space */ + buf = kmalloc(count + 1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = simple_write_to_buffer(buf, count, offp, ubuf, count); + if (ret < 0) + goto free_buf; + buf[count] = 0; + + /* Find position of colon in the buffer */ + colon_ch = strnchr(buf, count, ':'); + + /* + * If there is colon passed then new CSR value should be parsed as + * well, so allocate buffer for CSR address substring. + * If no colon is found, then string must have just one number with + * no new CSR value + */ + if (colon_ch != NULL) { + csraddr_len = colon_ch - buf; + csraddr_str = + kmalloc(sizeof(char)*(csraddr_len + 1), GFP_KERNEL); + if (csraddr_str == NULL) + return -ENOMEM; + /* Copy the register address to the substring buffer */ + strncpy(csraddr_str, buf, csraddr_len); + csraddr_str[csraddr_len] = '\0'; + /* Register value must follow the colon */ + csrval_str = colon_ch + 1; + csrval_len = strnlen(csrval_str, count - csraddr_len); + } else /* if (str_colon == NULL) */ { + csraddr_str = (char *)buf; /* Just to shut warning up */ + csraddr_len = strnlen(csraddr_str, count); + csrval_str = NULL; + csrval_len = 0; + } + + /* Convert CSR address to u32 value */ + ret = kstrtou32(csraddr_str, 0, &csraddr); + if (ret != 0) + goto free_csraddr_str; + + /* Check whether passed register address is valid */ + if (csraddr > CSR_MAX || !IS_ALIGNED(csraddr, SZ_4)) { + ret = -EINVAL; + goto free_csraddr_str; + } + + /* Shift register address to the right so to have u16 address */ + pdev->csr = (csraddr >> 2); + + /* Parse new CSR value and send it to IDT, if colon has been found */ + if (colon_ch != NULL) { + ret = kstrtou32(csrval_str, 0, &csrval); + if (ret != 0) + goto free_csraddr_str; + + ret = idt_csr_write(pdev, pdev->csr, csrval); + if (ret != 0) + goto free_csraddr_str; + } + + /* Free memory only if colon has been found */ +free_csraddr_str: + if (colon_ch != NULL) + kfree(csraddr_str); + + /* Free buffer allocated for data retrieved from User-space */ +free_buf: + kfree(buf); + + return (ret != 0 ? ret : count); +} + +/* + * idt_dbgfs_csr_read() - CSR debugfs-node read callback + * @filep: Pointer to the file system file descriptor + * @buf: Buffer to write data to + * @count: Size of the buffer + * @offp: Offset within the file + * + * It just prints the pair "0x:0x" to passed buffer. + */ +#define CSRBUF_SIZE ((size_t)32) +static ssize_t idt_dbgfs_csr_read(struct file *filep, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct idt_89hpesx_dev *pdev = filep->private_data; + u32 csraddr, csrval; + char buf[CSRBUF_SIZE]; + int ret, size; + + /* Perform CSR read operation */ + ret = idt_csr_read(pdev, pdev->csr, &csrval); + if (ret != 0) + return ret; + + /* Shift register address to the left so to have real address */ + csraddr = ((u32)pdev->csr << 2); + + /* Print the "0x:0x" to buffer */ + size = snprintf(buf, CSRBUF_SIZE, "0x%05x:0x%08x\n", + (unsigned int)csraddr, (unsigned int)csrval); + + /* Copy data to User-space */ + return simple_read_from_buffer(ubuf, count, offp, buf, size); +} + +/* + * eeprom_attribute - EEPROM sysfs-node attributes + * + * NOTE Size will be changed in compliance with OF node. EEPROM attribute will + * be read-only as well if the corresponding flag is specified in OF node. + */ +static BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE); + +/* + * csr_dbgfs_ops - CSR debugfs-node read/write operations + */ +static const struct file_operations csr_dbgfs_ops = { + .owner = THIS_MODULE, + .open = simple_open, + .write = idt_dbgfs_csr_write, + .read = idt_dbgfs_csr_read +}; + +/*=========================================================================== + * Driver init/deinit methods + *=========================================================================== + */ + +/* + * idt_set_defval() - disable EEPROM access by default + * @pdev: Pointer to the driver data + */ +static void idt_set_defval(struct idt_89hpesx_dev *pdev) +{ + /* If OF info is missing then use next values */ + pdev->eesize = 0; + pdev->eero = true; + pdev->inieecmd = 0; + pdev->eeaddr = 0; +} + +#ifdef CONFIG_OF +static const struct i2c_device_id ee_ids[]; +/* + * idt_ee_match_id() - check whether the node belongs to compatible EEPROMs + */ +static const struct i2c_device_id *idt_ee_match_id(struct device_node *node) +{ + const struct i2c_device_id *id = ee_ids; + char devname[I2C_NAME_SIZE]; + + /* Retrieve the device name without manufacturer name */ + if (of_modalias_node(node, devname, sizeof(devname))) + return NULL; + + /* Search through the device name */ + while (id->name[0]) { + if (strcmp(devname, id->name) == 0) + return id; + id++; + } + return NULL; +} + +/* + * idt_get_ofdata() - get IDT i2c-device parameters from device tree + * @pdev: Pointer to the driver data + */ +static void idt_get_ofdata(struct idt_89hpesx_dev *pdev) +{ + const struct device_node *node = pdev->client->dev.of_node; + struct device *dev = &pdev->client->dev; + + /* Read dts node parameters */ + if (node) { + const struct i2c_device_id *ee_id = NULL; + struct device_node *child; + const __be32 *addr_be; + int len; + + /* Walk through all child nodes looking for compatible one */ + for_each_available_child_of_node(node, child) { + ee_id = idt_ee_match_id(child); + if (IS_ERR_OR_NULL(ee_id)) { + dev_warn(dev, "Skip unsupported child node %s", + child->full_name); + continue; + } else + break; + } + + /* If there is no child EEPROM device, then set zero size */ + if (!ee_id) { + idt_set_defval(pdev); + return; + } + + /* Retrieve EEPROM size */ + pdev->eesize = (u32)ee_id->driver_data; + + /* Get custom EEPROM address from 'reg' attribute */ + addr_be = of_get_property(child, "reg", &len); + if (!addr_be || (len < sizeof(*addr_be))) { + dev_warn(dev, "No reg on %s, use default address %d", + child->full_name, EEPROM_DEF_ADDR); + pdev->inieecmd = 0; + pdev->eeaddr = EEPROM_DEF_ADDR << 1; + } else { + pdev->inieecmd = EEPROM_USA; + pdev->eeaddr = be32_to_cpup(addr_be) << 1; + } + + /* Check EEPROM 'read-only' flag */ + if (of_get_property(child, "read-only", NULL)) + pdev->eero = true; + else /* if (!of_get_property(node, "read-only", NULL)) */ + pdev->eero = false; + + dev_dbg(dev, "EEPROM of %u bytes found by %hhu", + pdev->eesize, pdev->eeaddr); + } else { + dev_warn(dev, "No dts node, EEPROM access disabled"); + idt_set_defval(pdev); + } +} +#else +static void idt_get_ofdata(struct idt_89hpesx_dev *pdev) +{ + struct device *dev = &pdev->client->dev; + + dev_warn(dev, "OF table is unsupported, EEPROM access disabled"); + + /* Nothing we can do, just set the default values */ + idt_set_defval(pdev); +} +#endif /* CONFIG_OF */ + +/* + * idt_create_pdev() - create and init data structure of the driver + * @client: i2c client of IDT PCIe-switch device + */ +static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client) +{ + struct idt_89hpesx_dev *pdev; + + /* Allocate memory for driver data */ + pdev = devm_kmalloc(&client->dev, sizeof(struct idt_89hpesx_dev), + GFP_KERNEL); + if (pdev == NULL) + return ERR_PTR(-ENOMEM); + + /* Initialize basic fields of the data */ + pdev->client = client; + i2c_set_clientdata(client, pdev); + + /* Read OF nodes information */ + idt_get_ofdata(pdev); + + /* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */ + pdev->inicsrcmd = CSR_DWE; + pdev->csr = CSR_DEF; + + /* Enable Packet Error Checking if it's supported by adapter */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC)) { + pdev->iniccode = CCODE_PEC; + client->flags |= I2C_CLIENT_PEC; + } else /* PEC is unsupported */ { + pdev->iniccode = 0; + } + + return pdev; +} + +/* + * idt_free_pdev() - free data structure of the driver + * @pdev: Pointer to the driver data + */ +static void idt_free_pdev(struct idt_89hpesx_dev *pdev) +{ + /* Clear driver data from device private field */ + i2c_set_clientdata(pdev->client, NULL); + + /* Just free memory allocated for data */ + devm_kfree(&pdev->client->dev, pdev); +} + +/* + * idt_set_smbus_ops() - set supported SMBus operations + * @pdev: Pointer to the driver data + * Return status of smbus check operations + */ +static int idt_set_smbus_ops(struct idt_89hpesx_dev *pdev) +{ + struct i2c_adapter *adapter = pdev->client->adapter; + struct device *dev = &pdev->client->dev; + + /* Check i2c adapter read functionality */ + if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_BLOCK_DATA)) { + pdev->smb_read = idt_smb_read_block; + dev_dbg(dev, "SMBus block-read op chosen"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + pdev->smb_read = idt_smb_read_i2c_block; + dev_dbg(dev, "SMBus i2c-block-read op chosen"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA) && + i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + pdev->smb_read = idt_smb_read_word; + dev_warn(dev, "Use slow word/byte SMBus read ops"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + pdev->smb_read = idt_smb_read_byte; + dev_warn(dev, "Use slow byte SMBus read op"); + } else /* no supported smbus read operations */ { + dev_err(dev, "No supported SMBus read op"); + return -EPFNOSUPPORT; + } + + /* Check i2c adapter write functionality */ + if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)) { + pdev->smb_write = idt_smb_write_block; + dev_dbg(dev, "SMBus block-write op chosen"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + pdev->smb_write = idt_smb_write_i2c_block; + dev_dbg(dev, "SMBus i2c-block-write op chosen"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_WRITE_WORD_DATA) && + i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + pdev->smb_write = idt_smb_write_word; + dev_warn(dev, "Use slow word/byte SMBus write op"); + } else if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + pdev->smb_write = idt_smb_write_byte; + dev_warn(dev, "Use slow byte SMBus write op"); + } else /* no supported smbus write operations */ { + dev_err(dev, "No supported SMBus write op"); + return -EPFNOSUPPORT; + } + + /* Initialize IDT SMBus slave interface mutex */ + mutex_init(&pdev->smb_mtx); + + return 0; +} + +/* + * idt_check_dev() - check whether it's really IDT 89HPESx device + * @pdev: Pointer to the driver data + * Return status of i2c adapter check operation + */ +static int idt_check_dev(struct idt_89hpesx_dev *pdev) +{ + struct device *dev = &pdev->client->dev; + u32 viddid; + int ret; + + /* Read VID and DID directly from IDT memory space */ + ret = idt_csr_read(pdev, IDT_VIDDID_CSR, &viddid); + if (ret != 0) { + dev_err(dev, "Failed to read VID/DID"); + return ret; + } + + /* Check whether it's IDT device */ + if ((viddid & IDT_VID_MASK) != PCI_VENDOR_ID_IDT) { + dev_err(dev, "Got unsupported VID/DID: 0x%08x", viddid); + return -ENODEV; + } + + dev_info(dev, "Found IDT 89HPES device VID:0x%04x, DID:0x%04x", + (viddid & IDT_VID_MASK), (viddid >> 16)); + + return 0; +} + +/* + * idt_create_sysfs_files() - create sysfs attribute files + * @pdev: Pointer to the driver data + * Return status of operation + */ +static int idt_create_sysfs_files(struct idt_89hpesx_dev *pdev) +{ + struct device *dev = &pdev->client->dev; + int ret; + + /* Don't do anything if EEPROM isn't accessible */ + if (pdev->eesize == 0) { + dev_dbg(dev, "Skip creating sysfs-files"); + return 0; + } + + /* Allocate memory for attribute file */ + pdev->ee_file = devm_kmalloc(dev, sizeof(*pdev->ee_file), GFP_KERNEL); + if (!pdev->ee_file) + return -ENOMEM; + + /* Copy the declared EEPROM attr structure to change some of fields */ + memcpy(pdev->ee_file, &bin_attr_eeprom, sizeof(*pdev->ee_file)); + + /* In case of read-only EEPROM get rid of write ability */ + if (pdev->eero) { + pdev->ee_file->attr.mode &= ~0200; + pdev->ee_file->write = NULL; + } + /* Create EEPROM sysfs file */ + pdev->ee_file->size = pdev->eesize; + ret = sysfs_create_bin_file(&dev->kobj, pdev->ee_file); + if (ret != 0) { + kfree(pdev->ee_file); + dev_err(dev, "Failed to create EEPROM sysfs-node"); + return ret; + } + + return 0; +} + +/* + * idt_remove_sysfs_files() - remove sysfs attribute files + * @pdev: Pointer to the driver data + */ +static void idt_remove_sysfs_files(struct idt_89hpesx_dev *pdev) +{ + struct device *dev = &pdev->client->dev; + + /* Don't do anything if EEPROM wasn't accessible */ + if (pdev->eesize == 0) + return; + + /* Remove EEPROM sysfs file */ + sysfs_remove_bin_file(&dev->kobj, pdev->ee_file); + + /* Free memory allocated for bin_attribute structure */ + kfree(pdev->ee_file); +} + +/* + * idt_create_dbgfs_files() - create debugfs files + * @pdev: Pointer to the driver data + */ +#define CSRNAME_LEN ((size_t)32) +static void idt_create_dbgfs_files(struct idt_89hpesx_dev *pdev) +{ + struct i2c_client *cli = pdev->client; + char fname[CSRNAME_LEN]; + + /* Create Debugfs directory for CSR file */ + snprintf(fname, CSRNAME_LEN, "%d-%04hx", cli->adapter->nr, cli->addr); + pdev->csr_dir = debugfs_create_dir(fname, csr_dbgdir); + + /* Create Debugfs file for CSR read/write operations */ + pdev->csr_file = debugfs_create_file(cli->name, 0600, + pdev->csr_dir, pdev, &csr_dbgfs_ops); +} + +/* + * idt_remove_dbgfs_files() - remove debugfs files + * @pdev: Pointer to the driver data + */ +static void idt_remove_dbgfs_files(struct idt_89hpesx_dev *pdev) +{ + /* Remove CSR directory and it sysfs-node */ + debugfs_remove_recursive(pdev->csr_dir); +} + +/* + * idt_probe() - IDT 89HPESx driver probe() callback method + */ +static int idt_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct idt_89hpesx_dev *pdev; + int ret; + + /* Create driver data */ + pdev = idt_create_pdev(client); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + /* Set SMBus operations */ + ret = idt_set_smbus_ops(pdev); + if (ret != 0) + goto err_free_pdev; + + /* Check whether it is truly IDT 89HPESx device */ + ret = idt_check_dev(pdev); + if (ret != 0) + goto err_free_pdev; + + /* Create sysfs files */ + ret = idt_create_sysfs_files(pdev); + if (ret != 0) + goto err_free_pdev; + + /* Create debugfs files */ + idt_create_dbgfs_files(pdev); + + return 0; + +err_free_pdev: + idt_free_pdev(pdev); + + return ret; +} + +/* + * idt_remove() - IDT 89HPESx driver remove() callback method + */ +static int idt_remove(struct i2c_client *client) +{ + struct idt_89hpesx_dev *pdev = i2c_get_clientdata(client); + + /* Remove debugfs files first */ + idt_remove_dbgfs_files(pdev); + + /* Remove sysfs files */ + idt_remove_sysfs_files(pdev); + + /* Discard driver data structure */ + idt_free_pdev(pdev); + + return 0; +} + +/* + * ee_ids - array of supported EEPROMs + */ +static const struct i2c_device_id ee_ids[] = { + { "24c32", 4096}, + { "24c64", 8192}, + { "24c128", 16384}, + { "24c256", 32768}, + { "24c512", 65536}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ee_ids); + +/* + * idt_ids - supported IDT 89HPESx devices + */ +static const struct i2c_device_id idt_ids[] = { + { "89hpes8nt2", 0 }, + { "89hpes12nt3", 0 }, + + { "89hpes24nt6ag2", 0 }, + { "89hpes32nt8ag2", 0 }, + { "89hpes32nt8bg2", 0 }, + { "89hpes12nt12g2", 0 }, + { "89hpes16nt16g2", 0 }, + { "89hpes24nt24g2", 0 }, + { "89hpes32nt24ag2", 0 }, + { "89hpes32nt24bg2", 0 }, + + { "89hpes12n3", 0 }, + { "89hpes12n3a", 0 }, + { "89hpes24n3", 0 }, + { "89hpes24n3a", 0 }, + + { "89hpes32h8", 0 }, + { "89hpes32h8g2", 0 }, + { "89hpes48h12", 0 }, + { "89hpes48h12g2", 0 }, + { "89hpes48h12ag2", 0 }, + { "89hpes16h16", 0 }, + { "89hpes22h16", 0 }, + { "89hpes22h16g2", 0 }, + { "89hpes34h16", 0 }, + { "89hpes34h16g2", 0 }, + { "89hpes64h16", 0 }, + { "89hpes64h16g2", 0 }, + { "89hpes64h16ag2", 0 }, + + /* { "89hpes3t3", 0 }, // No SMBus-slave iface */ + { "89hpes12t3g2", 0 }, + { "89hpes24t3g2", 0 }, + /* { "89hpes4t4", 0 }, // No SMBus-slave iface */ + { "89hpes16t4", 0 }, + { "89hpes4t4g2", 0 }, + { "89hpes10t4g2", 0 }, + { "89hpes16t4g2", 0 }, + { "89hpes16t4ag2", 0 }, + { "89hpes5t5", 0 }, + { "89hpes6t5", 0 }, + { "89hpes8t5", 0 }, + { "89hpes8t5a", 0 }, + { "89hpes24t6", 0 }, + { "89hpes6t6g2", 0 }, + { "89hpes24t6g2", 0 }, + { "89hpes16t7", 0 }, + { "89hpes32t8", 0 }, + { "89hpes32t8g2", 0 }, + { "89hpes48t12", 0 }, + { "89hpes48t12g2", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, idt_ids); + +/* + * idt_driver - IDT 89HPESx driver structure + */ +static struct i2c_driver idt_driver = { + .driver = { + .name = IDT_NAME, + .owner = THIS_MODULE, + }, + .probe = idt_probe, + .remove = idt_remove, + .id_table = idt_ids, +}; + +/* + * idt_init() - IDT 89HPESx driver init() callback method + */ +static int __init idt_init(void) +{ + /* Create Debugfs directory first */ + if (debugfs_initialized()) + csr_dbgdir = debugfs_create_dir("idt_csr", NULL); + + /* Add new i2c-device driver */ + return i2c_add_driver(&idt_driver); +} +module_init(idt_init); + +/* + * idt_exit() - IDT 89HPESx driver exit() callback method + */ +static void __exit idt_exit(void) +{ + /* Discard debugfs directory and all files if any */ + debugfs_remove_recursive(csr_dbgdir); + + /* Unregister i2c-device driver */ + i2c_del_driver(&idt_driver); +} +module_exit(idt_exit); -- 2.20.1