From ccf928249c92b04ec9527e97a7c6b2cd8cd9dc10 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 17 May 2016 11:05:34 +0200 Subject: [PATCH] ravb: Add missing free_irq() calls to ravb_close() When reopening the network device on ra7795/salvator-x, e.g. after a DHCP timeout: IP-Config: Reopening network devices... genirq: Flags mismatch irq 139. 00000000 (eth0:ch0:rx_be) vs. 00000000 (ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch0:rx_be IP-Config: Failed to open eth0 IP-Config: No network devices available The "mismatch" is due to requesting an IRQ that is already in use, while IRQF_PROBE_SHARED wasn't set. However, the real cause is that ravb_close() doesn't release any of the R-Car Gen3-specific secondary IRQs. Add the missing free_irq() calls to fix this. Fixes: f51bdc236b6c5835 ("ravb: Add dma queue interrupt support") Signed-off-by: Geert Uytterhoeven Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index bcebafd78023..867caf6e7a5a 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1667,8 +1667,13 @@ static int ravb_close(struct net_device *ndev) priv->phydev = NULL; } - if (priv->chip_id == RCAR_GEN3) + if (priv->chip_id != RCAR_GEN2) { + free_irq(priv->tx_irqs[RAVB_NC], ndev); + free_irq(priv->rx_irqs[RAVB_NC], ndev); + free_irq(priv->tx_irqs[RAVB_BE], ndev); + free_irq(priv->rx_irqs[RAVB_BE], ndev); free_irq(priv->emac_irq, ndev); + } free_irq(ndev->irq, ndev); napi_disable(&priv->napi[RAVB_NC]); -- 2.20.1