From ccc9b8263d904228e5007cfc206eba3e6bea9f98 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Tue, 30 May 2017 11:05:07 +0200 Subject: [PATCH] hwmon: (scpi) Fix the scale of SCP sensor readings The implementation details for SCPI seems to suggest that the sensor readings must be reported by SCP using a well defined scale (millidegree Celsius for temperature, millivolts for voltage, milliamperes for current, microwatts for power and microjoules for energy). This is also important for the interaction with other subsystems: for example both the thermal sub-system and the hwmon sysfs interface expect the temperature expressed in millidegree Celsius. Unfortunately since this behaviour is dependent on the firmware implementation there are cases where the sensor readings are reported using a different scale. For example in the Amlogic SoCs the temperature is reported in degree and not millidegree Celsius. To take into account this discrepancy and fixup the values reported by SCP a new compatible 'amlogic,meson-gxbb-scpi-sensors' is introduced and used in this patch by the scpi-hwmon driver to convert the sensor readings to the expected scale. Signed-off-by: Carlo Caione Acked-by: Sudeep Holla Signed-off-by: Guenter Roeck --- drivers/hwmon/scpi-hwmon.c | 54 +++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 094f948f99ff..a586480a7ca9 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -23,6 +24,7 @@ #include struct sensor_data { + unsigned int scale; struct scpi_sensor_info info; struct device_attribute dev_attr_input; struct device_attribute dev_attr_label; @@ -44,6 +46,30 @@ struct scpi_sensors { const struct attribute_group *groups[2]; }; +static const u32 gxbb_scpi_scale[] = { + [TEMPERATURE] = 1, /* (celsius) */ + [VOLTAGE] = 1000, /* (millivolts) */ + [CURRENT] = 1000, /* (milliamperes) */ + [POWER] = 1000000, /* (microwatts) */ + [ENERGY] = 1000000, /* (microjoules) */ +}; + +static const u32 scpi_scale[] = { + [TEMPERATURE] = 1000, /* (millicelsius) */ + [VOLTAGE] = 1000, /* (millivolts) */ + [CURRENT] = 1000, /* (milliamperes) */ + [POWER] = 1000000, /* (microwatts) */ + [ENERGY] = 1000000, /* (microjoules) */ +}; + +static void scpi_scale_reading(u64 *value, struct sensor_data *sensor) +{ + if (scpi_scale[sensor->info.class] != sensor->scale) { + *value *= scpi_scale[sensor->info.class]; + do_div(*value, sensor->scale); + } +} + static int scpi_read_temp(void *dev, int *temp) { struct scpi_thermal_zone *zone = dev; @@ -57,6 +83,8 @@ static int scpi_read_temp(void *dev, int *temp) if (ret) return ret; + scpi_scale_reading(&value, sensor); + *temp = value; return 0; } @@ -77,6 +105,8 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf) if (ret) return ret; + scpi_scale_reading(&value, sensor); + return sprintf(buf, "%llu\n", value); } @@ -94,14 +124,23 @@ static struct thermal_zone_of_device_ops scpi_sensor_ops = { .get_temp = scpi_read_temp, }; +static const struct of_device_id scpi_of_match[] = { + {.compatible = "arm,scpi-sensors", .data = &scpi_scale}, + {.compatible = "amlogic,meson-gxbb-scpi-sensors", .data = &gxbb_scpi_scale}, + {}, +}; +MODULE_DEVICE_TABLE(of, scpi_of_match); + static int scpi_hwmon_probe(struct platform_device *pdev) { u16 nr_sensors, i; + const u32 *scale; int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0; int num_energy = 0; struct scpi_ops *scpi_ops; struct device *hwdev, *dev = &pdev->dev; struct scpi_sensors *scpi_sensors; + const struct of_device_id *of_id; int idx, ret; scpi_ops = get_scpi_ops(); @@ -131,6 +170,13 @@ static int scpi_hwmon_probe(struct platform_device *pdev) scpi_sensors->scpi_ops = scpi_ops; + of_id = of_match_device(scpi_of_match, &pdev->dev); + if (!of_id) { + dev_err(&pdev->dev, "Unable to initialize scpi-hwmon data\n"); + return -ENODEV; + } + scale = of_id->data; + for (i = 0, idx = 0; i < nr_sensors; i++) { struct sensor_data *sensor = &scpi_sensors->data[idx]; @@ -178,6 +224,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev) continue; } + sensor->scale = scale[sensor->info.class]; + sensor->dev_attr_input.attr.mode = S_IRUGO; sensor->dev_attr_input.show = scpi_show_sensor; sensor->dev_attr_input.attr.name = sensor->input; @@ -247,12 +295,6 @@ static int scpi_hwmon_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id scpi_of_match[] = { - {.compatible = "arm,scpi-sensors"}, - {}, -}; -MODULE_DEVICE_TABLE(of, scpi_of_match); - static struct platform_driver scpi_hwmon_platdrv = { .driver = { .name = "scpi-hwmon", -- 2.20.1