From c9320b6dcb89658a5e53b4f8e31f4c2ee810ec2d Mon Sep 17 00:00:00 2001 From: Martin Willi Date: Thu, 16 Jul 2015 19:14:01 +0200 Subject: [PATCH] crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64 Implements an x86_64 assembler driver for the ChaCha20 stream cipher. This single block variant works on a single state matrix using SSE instructions. It requires SSSE3 due the use of pshufb for efficient 8/16-bit rotate operations. For large messages, throughput increases by ~65% compared to chacha20-generic: testing speed of chacha20 (chacha20-generic) encryption test 0 (256 bit key, 16 byte blocks): 45089207 operations in 10 seconds (721427312 bytes) test 1 (256 bit key, 64 byte blocks): 43839521 operations in 10 seconds (2805729344 bytes) test 2 (256 bit key, 256 byte blocks): 12702056 operations in 10 seconds (3251726336 bytes) test 3 (256 bit key, 1024 byte blocks): 3371173 operations in 10 seconds (3452081152 bytes) test 4 (256 bit key, 8192 byte blocks): 422468 operations in 10 seconds (3460857856 bytes) testing speed of chacha20 (chacha20-simd) encryption test 0 (256 bit key, 16 byte blocks): 43141886 operations in 10 seconds (690270176 bytes) test 1 (256 bit key, 64 byte blocks): 46845874 operations in 10 seconds (2998135936 bytes) test 2 (256 bit key, 256 byte blocks): 18458512 operations in 10 seconds (4725379072 bytes) test 3 (256 bit key, 1024 byte blocks): 5360533 operations in 10 seconds (5489185792 bytes) test 4 (256 bit key, 8192 byte blocks): 692846 operations in 10 seconds (5675794432 bytes) Benchmark results from a Core i5-4670T. Signed-off-by: Martin Willi Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 2 + arch/x86/crypto/chacha20-ssse3-x86_64.S | 142 ++++++++++++++++++++++++ arch/x86/crypto/chacha20_glue.c | 123 ++++++++++++++++++++ crypto/Kconfig | 15 +++ 4 files changed, 282 insertions(+) create mode 100644 arch/x86/crypto/chacha20-ssse3-x86_64.S create mode 100644 arch/x86/crypto/chacha20_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 5a4a089e8b1f..b09e9a4cea3e 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_CRYPTO_BLOWFISH_X86_64) += blowfish-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64_3WAY) += twofish-x86_64-3way.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o +obj-$(CONFIG_CRYPTO_CHACHA20_X86_64) += chacha20-x86_64.o obj-$(CONFIG_CRYPTO_SERPENT_SSE2_X86_64) += serpent-sse2-x86_64.o obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o @@ -60,6 +61,7 @@ blowfish-x86_64-y := blowfish-x86_64-asm_64.o blowfish_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o twofish-x86_64-3way-y := twofish-x86_64-asm_64-3way.o twofish_glue_3way.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o +chacha20-x86_64-y := chacha20-ssse3-x86_64.o chacha20_glue.o serpent-sse2-x86_64-y := serpent-sse2-x86_64-asm_64.o serpent_sse2_glue.o ifeq ($(avx_supported),yes) diff --git a/arch/x86/crypto/chacha20-ssse3-x86_64.S b/arch/x86/crypto/chacha20-ssse3-x86_64.S new file mode 100644 index 000000000000..1b97ad074cef --- /dev/null +++ b/arch/x86/crypto/chacha20-ssse3-x86_64.S @@ -0,0 +1,142 @@ +/* + * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSSE3 functions + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +.data +.align 16 + +ROT8: .octa 0x0e0d0c0f0a09080b0605040702010003 +ROT16: .octa 0x0d0c0f0e09080b0a0504070601000302 + +.text + +ENTRY(chacha20_block_xor_ssse3) + # %rdi: Input state matrix, s + # %rsi: 1 data block output, o + # %rdx: 1 data block input, i + + # This function encrypts one ChaCha20 block by loading the state matrix + # in four SSE registers. It performs matrix operation on four words in + # parallel, but requireds shuffling to rearrange the words after each + # round. 8/16-bit word rotation is done with the slightly better + # performing SSSE3 byte shuffling, 7/12-bit word rotation uses + # traditional shift+OR. + + # x0..3 = s0..3 + movdqa 0x00(%rdi),%xmm0 + movdqa 0x10(%rdi),%xmm1 + movdqa 0x20(%rdi),%xmm2 + movdqa 0x30(%rdi),%xmm3 + movdqa %xmm0,%xmm8 + movdqa %xmm1,%xmm9 + movdqa %xmm2,%xmm10 + movdqa %xmm3,%xmm11 + + movdqa ROT8(%rip),%xmm4 + movdqa ROT16(%rip),%xmm5 + + mov $10,%ecx + +.Ldoubleround: + + # x0 += x1, x3 = rotl32(x3 ^ x0, 16) + paddd %xmm1,%xmm0 + pxor %xmm0,%xmm3 + pshufb %xmm5,%xmm3 + + # x2 += x3, x1 = rotl32(x1 ^ x2, 12) + paddd %xmm3,%xmm2 + pxor %xmm2,%xmm1 + movdqa %xmm1,%xmm6 + pslld $12,%xmm6 + psrld $20,%xmm1 + por %xmm6,%xmm1 + + # x0 += x1, x3 = rotl32(x3 ^ x0, 8) + paddd %xmm1,%xmm0 + pxor %xmm0,%xmm3 + pshufb %xmm4,%xmm3 + + # x2 += x3, x1 = rotl32(x1 ^ x2, 7) + paddd %xmm3,%xmm2 + pxor %xmm2,%xmm1 + movdqa %xmm1,%xmm7 + pslld $7,%xmm7 + psrld $25,%xmm1 + por %xmm7,%xmm1 + + # x1 = shuffle32(x1, MASK(0, 3, 2, 1)) + pshufd $0x39,%xmm1,%xmm1 + # x2 = shuffle32(x2, MASK(1, 0, 3, 2)) + pshufd $0x4e,%xmm2,%xmm2 + # x3 = shuffle32(x3, MASK(2, 1, 0, 3)) + pshufd $0x93,%xmm3,%xmm3 + + # x0 += x1, x3 = rotl32(x3 ^ x0, 16) + paddd %xmm1,%xmm0 + pxor %xmm0,%xmm3 + pshufb %xmm5,%xmm3 + + # x2 += x3, x1 = rotl32(x1 ^ x2, 12) + paddd %xmm3,%xmm2 + pxor %xmm2,%xmm1 + movdqa %xmm1,%xmm6 + pslld $12,%xmm6 + psrld $20,%xmm1 + por %xmm6,%xmm1 + + # x0 += x1, x3 = rotl32(x3 ^ x0, 8) + paddd %xmm1,%xmm0 + pxor %xmm0,%xmm3 + pshufb %xmm4,%xmm3 + + # x2 += x3, x1 = rotl32(x1 ^ x2, 7) + paddd %xmm3,%xmm2 + pxor %xmm2,%xmm1 + movdqa %xmm1,%xmm7 + pslld $7,%xmm7 + psrld $25,%xmm1 + por %xmm7,%xmm1 + + # x1 = shuffle32(x1, MASK(2, 1, 0, 3)) + pshufd $0x93,%xmm1,%xmm1 + # x2 = shuffle32(x2, MASK(1, 0, 3, 2)) + pshufd $0x4e,%xmm2,%xmm2 + # x3 = shuffle32(x3, MASK(0, 3, 2, 1)) + pshufd $0x39,%xmm3,%xmm3 + + dec %ecx + jnz .Ldoubleround + + # o0 = i0 ^ (x0 + s0) + movdqu 0x00(%rdx),%xmm4 + paddd %xmm8,%xmm0 + pxor %xmm4,%xmm0 + movdqu %xmm0,0x00(%rsi) + # o1 = i1 ^ (x1 + s1) + movdqu 0x10(%rdx),%xmm5 + paddd %xmm9,%xmm1 + pxor %xmm5,%xmm1 + movdqu %xmm1,0x10(%rsi) + # o2 = i2 ^ (x2 + s2) + movdqu 0x20(%rdx),%xmm6 + paddd %xmm10,%xmm2 + pxor %xmm6,%xmm2 + movdqu %xmm2,0x20(%rsi) + # o3 = i3 ^ (x3 + s3) + movdqu 0x30(%rdx),%xmm7 + paddd %xmm11,%xmm3 + pxor %xmm7,%xmm3 + movdqu %xmm3,0x30(%rsi) + + ret +ENDPROC(chacha20_block_xor_ssse3) diff --git a/arch/x86/crypto/chacha20_glue.c b/arch/x86/crypto/chacha20_glue.c new file mode 100644 index 000000000000..250de401d28f --- /dev/null +++ b/arch/x86/crypto/chacha20_glue.c @@ -0,0 +1,123 @@ +/* + * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code + * + * Copyright (C) 2015 Martin Willi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CHACHA20_STATE_ALIGN 16 + +asmlinkage void chacha20_block_xor_ssse3(u32 *state, u8 *dst, const u8 *src); + +static void chacha20_dosimd(u32 *state, u8 *dst, const u8 *src, + unsigned int bytes) +{ + u8 buf[CHACHA20_BLOCK_SIZE]; + + while (bytes >= CHACHA20_BLOCK_SIZE) { + chacha20_block_xor_ssse3(state, dst, src); + bytes -= CHACHA20_BLOCK_SIZE; + src += CHACHA20_BLOCK_SIZE; + dst += CHACHA20_BLOCK_SIZE; + state[12]++; + } + if (bytes) { + memcpy(buf, src, bytes); + chacha20_block_xor_ssse3(state, buf, buf); + memcpy(dst, buf, bytes); + } +} + +static int chacha20_simd(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + u32 *state, state_buf[16 + (CHACHA20_STATE_ALIGN / sizeof(u32)) - 1]; + struct blkcipher_walk walk; + int err; + + if (!may_use_simd()) + return crypto_chacha20_crypt(desc, dst, src, nbytes); + + state = (u32 *)roundup((uintptr_t)state_buf, CHACHA20_STATE_ALIGN); + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, CHACHA20_BLOCK_SIZE); + + crypto_chacha20_init(state, crypto_blkcipher_ctx(desc->tfm), walk.iv); + + kernel_fpu_begin(); + + while (walk.nbytes >= CHACHA20_BLOCK_SIZE) { + chacha20_dosimd(state, walk.dst.virt.addr, walk.src.virt.addr, + rounddown(walk.nbytes, CHACHA20_BLOCK_SIZE)); + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % CHACHA20_BLOCK_SIZE); + } + + if (walk.nbytes) { + chacha20_dosimd(state, walk.dst.virt.addr, walk.src.virt.addr, + walk.nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + + kernel_fpu_end(); + + return err; +} + +static struct crypto_alg alg = { + .cra_name = "chacha20", + .cra_driver_name = "chacha20-simd", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = 1, + .cra_type = &crypto_blkcipher_type, + .cra_ctxsize = sizeof(struct chacha20_ctx), + .cra_alignmask = sizeof(u32) - 1, + .cra_module = THIS_MODULE, + .cra_u = { + .blkcipher = { + .min_keysize = CHACHA20_KEY_SIZE, + .max_keysize = CHACHA20_KEY_SIZE, + .ivsize = CHACHA20_IV_SIZE, + .geniv = "seqiv", + .setkey = crypto_chacha20_setkey, + .encrypt = chacha20_simd, + .decrypt = chacha20_simd, + }, + }, +}; + +static int __init chacha20_simd_mod_init(void) +{ + if (!cpu_has_ssse3) + return -ENODEV; + + return crypto_register_alg(&alg); +} + +static void __exit chacha20_simd_mod_fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(chacha20_simd_mod_init); +module_exit(chacha20_simd_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Martin Willi "); +MODULE_DESCRIPTION("chacha20 cipher algorithm, SIMD accelerated"); +MODULE_ALIAS_CRYPTO("chacha20"); +MODULE_ALIAS_CRYPTO("chacha20-simd"); diff --git a/crypto/Kconfig b/crypto/Kconfig index b4cfc5754033..8f24185ee0a7 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -1213,6 +1213,21 @@ config CRYPTO_CHACHA20 See also: +config CRYPTO_CHACHA20_X86_64 + tristate "ChaCha20 cipher algorithm (x86_64/SSSE3)" + depends on X86 && 64BIT + select CRYPTO_BLKCIPHER + select CRYPTO_CHACHA20 + help + ChaCha20 cipher algorithm, RFC7539. + + ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J. + Bernstein and further specified in RFC7539 for use in IETF protocols. + This is the x86_64 assembler implementation using SIMD instructions. + + See also: + + config CRYPTO_SEED tristate "SEED cipher algorithm" select CRYPTO_ALGAPI -- 2.20.1