From c91a301162899ee100c1eab397958cb9aef50d0c Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Mon, 21 Sep 2015 11:24:35 +0200 Subject: [PATCH] mrf24j40: rework rx handling to async rx handling This patch prepares that we can do the receive handling inside interrupt context by using spi_async. This is necessary for introduce a non-threaded irq handling. Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do a driectly full write of register "BBREG1", because it contains the bit RXDECINV only. Reviewed-by: Stefan Schmidt Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/mrf24j40.c | 282 +++++++++++++----------------- 1 file changed, 118 insertions(+), 164 deletions(-) diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 3cf06257b19f..0cb251efdc0e 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -167,6 +167,20 @@ struct mrf24j40 { u8 tx_post_buf[2]; struct spi_transfer tx_post_trx; + /* for protect/unprotect/read length rxfifo */ + struct spi_message rx_msg; + u8 rx_buf[3]; + struct spi_transfer rx_trx; + + /* receive handling */ + struct spi_message rx_buf_msg; + u8 rx_addr_buf[2]; + struct spi_transfer rx_addr_trx; + u8 rx_lqi_buf[2]; + struct spi_transfer rx_lqi_trx; + u8 rx_fifo_buf[RX_FIFO_SIZE]; + struct spi_transfer rx_fifo_buf_trx; + struct mutex buffer_mutex; /* only used to protect buf */ u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */ }; @@ -472,32 +486,6 @@ static const struct regmap_bus mrf24j40_long_regmap_bus = { .val_format_endian_default = REGMAP_ENDIAN_BIG, }; -static int write_short_reg(struct mrf24j40 *devrec, u8 reg, u8 value) -{ - int ret; - struct spi_message msg; - struct spi_transfer xfer = { - .len = 2, - .tx_buf = devrec->buf, - .rx_buf = devrec->buf, - }; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - mutex_lock(&devrec->buffer_mutex); - devrec->buf[0] = MRF24J40_WRITESHORT(reg); - devrec->buf[1] = value; - - ret = spi_sync(devrec->spi, &msg); - if (ret) - dev_err(printdev(devrec), - "SPI write Failed for short register 0x%hhx\n", reg); - - mutex_unlock(&devrec->buffer_mutex); - return ret; -} - static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val) { int ret = -1; @@ -526,37 +514,6 @@ static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val) return ret; } -static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value) -{ - int ret; - u16 cmd; - struct spi_message msg; - struct spi_transfer xfer = { - .len = 3, - .tx_buf = devrec->buf, - .rx_buf = devrec->buf, - }; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - cmd = MRF24J40_READLONG(reg); - mutex_lock(&devrec->buffer_mutex); - devrec->buf[0] = cmd >> 8 & 0xff; - devrec->buf[1] = cmd & 0xff; - devrec->buf[2] = 0; - - ret = spi_sync(devrec->spi, &msg); - if (ret) - dev_err(printdev(devrec), - "SPI read Failed for long register 0x%hx\n", reg); - else - *value = devrec->buf[2]; - - mutex_unlock(&devrec->buffer_mutex); - return ret; -} - static void write_tx_buf_complete(void *context) { struct mrf24j40 *devrec = context; @@ -616,78 +573,6 @@ static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb) return write_tx_buf(devrec, 0x000, skb->data, skb->len); } -static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec, - u8 *data, u8 *len, u8 *lqi) -{ - u8 rx_len; - u8 addr[2]; - u8 lqi_rssi[2]; - u16 cmd; - int ret; - struct spi_message msg; - struct spi_transfer addr_xfer = { - .len = 2, - .tx_buf = &addr, - }; - struct spi_transfer data_xfer = { - .len = 0x0, /* set below */ - .rx_buf = data, - }; - struct spi_transfer status_xfer = { - .len = 2, - .rx_buf = &lqi_rssi, - }; - - /* Get the length of the data in the RX FIFO. The length in this - * register exclues the 1-byte length field at the beginning. */ - ret = read_long_reg(devrec, REG_RX_FIFO, &rx_len); - if (ret) - goto out; - - /* Range check the RX FIFO length, accounting for the one-byte - * length field at the beginning. */ - if (rx_len > RX_FIFO_SIZE-1) { - dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n"); - rx_len = RX_FIFO_SIZE-1; - } - - if (rx_len > *len) { - /* Passed in buffer wasn't big enough. Should never happen. */ - dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n"); - rx_len = *len; - } - - /* Set up the commands to read the data. */ - cmd = MRF24J40_READLONG(REG_RX_FIFO+1); - addr[0] = cmd >> 8 & 0xff; - addr[1] = cmd & 0xff; - data_xfer.len = rx_len; - - spi_message_init(&msg); - spi_message_add_tail(&addr_xfer, &msg); - spi_message_add_tail(&data_xfer, &msg); - spi_message_add_tail(&status_xfer, &msg); - - ret = spi_sync(devrec->spi, &msg); - if (ret) { - dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n"); - goto out; - } - - *lqi = lqi_rssi[0]; - *len = rx_len; - -#ifdef DEBUG - print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", - DUMP_PREFIX_OFFSET, 16, 1, data, *len, 0); - pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", - lqi_rssi[0], lqi_rssi[1]); -#endif - -out: - return ret; -} - static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level) { /* TODO: */ @@ -823,53 +708,98 @@ static int mrf24j40_filter(struct ieee802154_hw *hw, return 0; } -static int mrf24j40_handle_rx(struct mrf24j40 *devrec) +static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec) { - u8 len = RX_FIFO_SIZE; - u8 lqi = 0; - u8 val; - int ret = 0; - int ret2; - struct sk_buff *skb; + int ret; - /* Turn off reception of packets off the air. This prevents the - * device from overwriting the buffer while we're reading it. */ - ret = read_short_reg(devrec, REG_BBREG1, &val); + /* Turn back on reception of packets off the air. */ + devrec->rx_msg.complete = NULL; + devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); + devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */ + ret = spi_async(devrec->spi, &devrec->rx_msg); if (ret) - goto out; - val |= 4; /* SET RXDECINV */ - write_short_reg(devrec, REG_BBREG1, val); + dev_err(printdev(devrec), "failed to unlock rx buffer\n"); +} - skb = dev_alloc_skb(len); +static void mrf24j40_handle_rx_read_buf_complete(void *context) +{ + struct mrf24j40 *devrec = context; + u8 len = devrec->rx_buf[2]; + u8 rx_local_buf[RX_FIFO_SIZE]; + struct sk_buff *skb; + + memcpy(rx_local_buf, devrec->rx_fifo_buf, len); + mrf24j40_handle_rx_read_buf_unlock(devrec); + + skb = dev_alloc_skb(IEEE802154_MTU); if (!skb) { - ret = -ENOMEM; - goto out; + dev_err(printdev(devrec), "failed to allocate skb\n"); + return; } - ret = mrf24j40_read_rx_buf(devrec, skb_put(skb, len), &len, &lqi); - if (ret < 0) { - dev_err(printdev(devrec), "Failure reading RX FIFO\n"); - kfree_skb(skb); - ret = -EINVAL; - goto out; + memcpy(skb_put(skb, len), rx_local_buf, len); + ieee802154_rx_irqsafe(devrec->hw, skb, 0); + +#ifdef DEBUG + print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1, + rx_local_buf, len, 0); + pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n", + devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]); +#endif +} + +static void mrf24j40_handle_rx_read_buf(void *context) +{ + struct mrf24j40 *devrec = context; + u16 cmd; + int ret; + + /* if length is invalid read the full MTU */ + if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2])) + devrec->rx_buf[2] = IEEE802154_MTU; + + cmd = MRF24J40_READLONG(REG_RX_FIFO + 1); + devrec->rx_addr_buf[0] = cmd >> 8 & 0xff; + devrec->rx_addr_buf[1] = cmd & 0xff; + devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2]; + ret = spi_async(devrec->spi, &devrec->rx_buf_msg); + if (ret) { + dev_err(printdev(devrec), "failed to read rx buffer\n"); + mrf24j40_handle_rx_read_buf_unlock(devrec); } +} - /* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040, - * also from a workqueue). I think irqsafe is not necessary here. - * Can someone confirm? */ - ieee802154_rx_irqsafe(devrec->hw, skb, lqi); +static void mrf24j40_handle_rx_read_len(void *context) +{ + struct mrf24j40 *devrec = context; + u16 cmd; + int ret; - dev_dbg(printdev(devrec), "RX Handled\n"); + /* read the length of received frame */ + devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf; + devrec->rx_trx.len = 3; + cmd = MRF24J40_READLONG(REG_RX_FIFO); + devrec->rx_buf[0] = cmd >> 8 & 0xff; + devrec->rx_buf[1] = cmd & 0xff; -out: - /* Turn back on reception of packets off the air. */ - ret2 = read_short_reg(devrec, REG_BBREG1, &val); - if (ret2) - return ret2; - val &= ~0x4; /* Clear RXDECINV */ - write_short_reg(devrec, REG_BBREG1, val); + ret = spi_async(devrec->spi, &devrec->rx_msg); + if (ret) { + dev_err(printdev(devrec), "failed to read rx buffer length\n"); + mrf24j40_handle_rx_read_buf_unlock(devrec); + } +} - return ret; +static int mrf24j40_handle_rx(struct mrf24j40 *devrec) +{ + /* Turn off reception of packets off the air. This prevents the + * device from overwriting the buffer while we're reading it. + */ + devrec->rx_msg.complete = mrf24j40_handle_rx_read_len; + devrec->rx_trx.len = 2; + devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1); + devrec->rx_buf[1] = 0x04; /* SET RXDECINV */ + + return spi_async(devrec->spi, &devrec->rx_msg); } static const struct ieee802154_ops mrf24j40_ops = { @@ -1025,6 +955,29 @@ mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec) spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg); } +static void +mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec) +{ + spi_message_init(&devrec->rx_msg); + devrec->rx_msg.context = devrec; + devrec->rx_trx.len = 2; + devrec->rx_trx.tx_buf = devrec->rx_buf; + devrec->rx_trx.rx_buf = devrec->rx_buf; + spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg); + + spi_message_init(&devrec->rx_buf_msg); + devrec->rx_buf_msg.context = devrec; + devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete; + devrec->rx_addr_trx.len = 2; + devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf; + spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg); + devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf; + spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg); + devrec->rx_lqi_trx.len = 2; + devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf; + spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg); +} + static void mrf24j40_phy_setup(struct mrf24j40 *devrec) { ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr); @@ -1054,6 +1007,7 @@ static int mrf24j40_probe(struct spi_device *spi) devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT; mrf24j40_setup_tx_spi_messages(devrec); + mrf24j40_setup_rx_spi_messages(devrec); devrec->regmap_short = devm_regmap_init_spi(spi, &mrf24j40_short_regmap); -- 2.20.1