From c8aea565e8f715d9f10064b1cbfbc15bf75df501 Mon Sep 17 00:00:00 2001 From: Gery Kahn Date: Tue, 5 Oct 2010 16:09:05 +0200 Subject: [PATCH] wl1271: ref_clock cosmetic changes Cosmetic cleanup for ref_clock code while configured by board. Signed-off-by: Gery Kahn Signed-off-by: Luciano Coelho --- drivers/net/wireless/wl12xx/wl1271_boot.c | 10 ++++------ include/linux/wl12xx.h | 8 ++++++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c index b91021242098..5b190728ca55 100644 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ b/drivers/net/wireless/wl12xx/wl1271_boot.c @@ -471,20 +471,19 @@ int wl1271_boot(struct wl1271 *wl) { int ret = 0; u32 tmp, clk, pause; - int ref_clock = wl->ref_clock; wl1271_boot_hw_version(wl); - if (ref_clock == 0 || ref_clock == 2 || ref_clock == 4) + if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4) /* ref clk: 19.2/38.4/38.4-XTAL */ clk = 0x3; - else if (ref_clock == 1 || ref_clock == 3) + else if (wl->ref_clock == 1 || wl->ref_clock == 3) /* ref clk: 26/52 */ clk = 0x5; else return -EINVAL; - if (ref_clock != 0) { + if (wl->ref_clock != 0) { u16 val; /* Set clock type (open drain) */ val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE); @@ -529,8 +528,7 @@ int wl1271_boot(struct wl1271 *wl) wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); - /* 2 */ - clk |= (ref_clock << 1) << 4; + clk |= (wl->ref_clock << 1) << 4; wl1271_write32(wl, DRPW_SCRATCH_START, clk); wl1271_set_partition(wl, &part_table[PART_WORK]); diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 4f902e1908aa..bebb8efea0a6 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,6 +24,14 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H +/* The board reference clock values */ +enum { + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ + WL12XX_REFCLOCK_54 = 3, /* 54 MHz */ +}; + struct wl12xx_platform_data { void (*set_power)(bool enable); /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */ -- 2.20.1