From c806b0b84d20a942ee94796e2a9f7f2326ab208f Mon Sep 17 00:00:00 2001 From: Dudley Du Date: Sat, 17 Jan 2015 22:07:12 -0800 Subject: [PATCH] Input: cyapa - add sysfs interfaces support in the cyapa driver Introduce control interfaces that are commonly used in pre- and after production, for trackpad device state checking, managing and firmware image updating. These interfaces include mode, firmware_version and product_id interfaces for reading firmware version and trackpad device product id values, and update_fw interface to command firmware image update process. There are also baseline and calibrate interfaces for reading and checking trackpad device's sensors states. Signed-off-by: Dudley Du Tested-by: Jeremiah Mahler Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/cyapa.c | 310 ++++++++++++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index 3c72409fbc5f..f59553f72dfa 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -32,6 +32,8 @@ #define CYAPA_ADAPTER_FUNC_SMBUS 2 #define CYAPA_ADAPTER_FUNC_BOTH 3 +#define CYAPA_FW_NAME "cyapa.bin" + const char product_id[] = "CYTRA"; static int cyapa_reinitialize(struct cyapa *cyapa); @@ -476,6 +478,38 @@ static int cyapa_create_input_dev(struct cyapa *cyapa) return 0; } +static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa) +{ + struct input_dev *input = cyapa->input; + + if (!input || !input->users) { + /* + * When input is NULL, TP must be in deep sleep mode. + * In this mode, later non-power I2C command will always failed + * if not bring it out of deep sleep mode firstly, + * so must command TP to active mode here. + */ + if (!input || cyapa->operational) + cyapa->ops->set_power_mode(cyapa, + PWR_MODE_FULL_ACTIVE, 0); + /* Gen3 always using polling mode for command. */ + if (cyapa->gen >= CYAPA_GEN5) + enable_irq(cyapa->client->irq); + } +} + +static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa) +{ + struct input_dev *input = cyapa->input; + + if (!input || !input->users) { + if (cyapa->gen >= CYAPA_GEN5) + disable_irq(cyapa->client->irq); + if (!input || cyapa->operational) + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); + } +} + /* * cyapa_sleep_time_to_pwr_cmd and cyapa_pwr_cmd_to_sleep_time * @@ -877,6 +911,269 @@ static inline int cyapa_start_runtime(struct cyapa *cyapa) } #endif /* CONFIG_PM */ +static ssize_t cyapa_show_fm_ver(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int error; + struct cyapa *cyapa = dev_get_drvdata(dev); + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + error = scnprintf(buf, PAGE_SIZE, "%d.%d\n", cyapa->fw_maj_ver, + cyapa->fw_min_ver); + mutex_unlock(&cyapa->state_sync_lock); + return error; +} + +static ssize_t cyapa_show_product_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + int size; + int error; + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + size = scnprintf(buf, PAGE_SIZE, "%s\n", cyapa->product_id); + mutex_unlock(&cyapa->state_sync_lock); + return size; +} + +static int cyapa_firmware(struct cyapa *cyapa, const char *fw_name) +{ + struct device *dev = &cyapa->client->dev; + const struct firmware *fw; + int error; + + error = request_firmware(&fw, fw_name, dev); + if (error) { + dev_err(dev, "Could not load firmware from %s: %d\n", + fw_name, error); + return error; + } + + error = cyapa->ops->check_fw(cyapa, fw); + if (error) { + dev_err(dev, "Invalid CYAPA firmware image: %s\n", + fw_name); + goto done; + } + + /* + * Resume the potentially suspended device because doing FW + * update on a device not in the FULL mode has a chance to + * fail. + */ + pm_runtime_get_sync(dev); + + /* Require IRQ support for firmware update commands. */ + cyapa_enable_irq_for_cmd(cyapa); + + error = cyapa->ops->bl_enter(cyapa); + if (error) { + dev_err(dev, "bl_enter failed, %d\n", error); + goto err_detect; + } + + error = cyapa->ops->bl_activate(cyapa); + if (error) { + dev_err(dev, "bl_activate failed, %d\n", error); + goto err_detect; + } + + error = cyapa->ops->bl_initiate(cyapa, fw); + if (error) { + dev_err(dev, "bl_initiate failed, %d\n", error); + goto err_detect; + } + + error = cyapa->ops->update_fw(cyapa, fw); + if (error) { + dev_err(dev, "update_fw failed, %d\n", error); + goto err_detect; + } + +err_detect: + cyapa_disable_irq_for_cmd(cyapa); + pm_runtime_put_noidle(dev); + +done: + release_firmware(fw); + return error; +} + +static ssize_t cyapa_update_fw_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + char fw_name[NAME_MAX]; + int ret, error; + + if (count > NAME_MAX) { + dev_err(dev, "File name too long\n"); + return -EINVAL; + } + + memcpy(fw_name, buf, count); + if (fw_name[count - 1] == '\n') + fw_name[count - 1] = '\0'; + else + fw_name[count] = '\0'; + + if (cyapa->input) { + /* + * Force the input device to be registered after the firmware + * image is updated, so if the corresponding parameters updated + * in the new firmware image can taken effect immediately. + */ + input_unregister_device(cyapa->input); + cyapa->input = NULL; + } + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) { + /* + * Whatever, do reinitialize to try to recover TP state to + * previous state just as it entered fw update entrance. + */ + cyapa_reinitialize(cyapa); + return error; + } + + error = cyapa_firmware(cyapa, fw_name); + if (error) + dev_err(dev, "firmware update failed: %d\n", error); + else + dev_dbg(dev, "firmware update successfully done.\n"); + + /* + * Redetect trackpad device states because firmware update process + * will reset trackpad device into bootloader mode. + */ + ret = cyapa_reinitialize(cyapa); + if (ret) { + dev_err(dev, "failed to redetect after updated: %d\n", ret); + error = error ? error : ret; + } + + mutex_unlock(&cyapa->state_sync_lock); + + return error ? error : count; +} + +static ssize_t cyapa_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + int error; + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + + if (cyapa->operational) { + cyapa_enable_irq_for_cmd(cyapa); + error = cyapa->ops->calibrate_store(dev, attr, buf, count); + cyapa_disable_irq_for_cmd(cyapa); + } else { + error = -EBUSY; /* Still running in bootloader mode. */ + } + + mutex_unlock(&cyapa->state_sync_lock); + return error < 0 ? error : count; +} + +static ssize_t cyapa_show_baseline(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + ssize_t error; + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + + if (cyapa->operational) { + cyapa_enable_irq_for_cmd(cyapa); + error = cyapa->ops->show_baseline(dev, attr, buf); + cyapa_disable_irq_for_cmd(cyapa); + } else { + error = -EBUSY; /* Still running in bootloader mode. */ + } + + mutex_unlock(&cyapa->state_sync_lock); + return error; +} + +static char *cyapa_state_to_string(struct cyapa *cyapa) +{ + switch (cyapa->state) { + case CYAPA_STATE_BL_BUSY: + return "bootloader busy"; + case CYAPA_STATE_BL_IDLE: + return "bootloader idle"; + case CYAPA_STATE_BL_ACTIVE: + return "bootloader active"; + case CYAPA_STATE_GEN5_BL: + return "bootloader"; + case CYAPA_STATE_OP: + case CYAPA_STATE_GEN5_APP: + return "operational"; /* Normal valid state. */ + default: + return "invalid mode"; + } +} + +static ssize_t cyapa_show_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + int size; + int error; + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + + size = scnprintf(buf, PAGE_SIZE, "gen%d %s\n", + cyapa->gen, cyapa_state_to_string(cyapa)); + + mutex_unlock(&cyapa->state_sync_lock); + return size; +} + +static DEVICE_ATTR(firmware_version, S_IRUGO, cyapa_show_fm_ver, NULL); +static DEVICE_ATTR(product_id, S_IRUGO, cyapa_show_product_id, NULL); +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, cyapa_update_fw_store); +static DEVICE_ATTR(baseline, S_IRUGO, cyapa_show_baseline, NULL); +static DEVICE_ATTR(calibrate, S_IWUSR, NULL, cyapa_calibrate_store); +static DEVICE_ATTR(mode, S_IRUGO, cyapa_show_mode, NULL); + +static struct attribute *cyapa_sysfs_entries[] = { + &dev_attr_firmware_version.attr, + &dev_attr_product_id.attr, + &dev_attr_update_fw.attr, + &dev_attr_baseline.attr, + &dev_attr_calibrate.attr, + &dev_attr_mode.attr, + NULL, +}; + +static const struct attribute_group cyapa_sysfs_group = { + .attrs = cyapa_sysfs_entries, +}; + +static void cyapa_remove_sysfs_group(void *data) +{ + struct cyapa *cyapa = data; + + sysfs_remove_group(&cyapa->client->dev.kobj, &cyapa_sysfs_group); +} + static int cyapa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { @@ -916,6 +1213,19 @@ static int cyapa_probe(struct i2c_client *client, return error; } + error = sysfs_create_group(&client->dev.kobj, &cyapa_sysfs_group); + if (error) { + dev_err(dev, "failed to create sysfs entries: %d\n", error); + return error; + } + + error = devm_add_action(dev, cyapa_remove_sysfs_group, cyapa); + if (error) { + cyapa_remove_sysfs_group(cyapa); + dev_err(dev, "failed to add sysfs cleanup action: %d\n", error); + return error; + } + error = cyapa_prepare_wakeup_controls(cyapa); if (error) { dev_err(dev, "failed to prepare wakeup controls: %d\n", error); -- 2.20.1