From c714a588fc39dc8c8f70014f5691217717983fb3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 31 May 2016 17:26:00 +0800 Subject: [PATCH] regulator: tps51632: Fix setting ramp delay According to the datasheet: SLEW Register(Address = 07h) b7 b6 b5 b4 b3 b2 b1 b0 48mV/us 42mV/us 36mV/us 30mV/us 24mV/us 18mV/us 12mV/us 6mV/us Current code does not set correct slew rate in some cases: e.g. Assume ramp_delay is 10000, current code sets slew register to 6mV/us. Fix the logic to set slew register. Signed-off-by: Axel Lin Acked-by: Laxman Dewangan Signed-off-by: Mark Brown --- drivers/regulator/tps51632-regulator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index 572816e30095..c139890c1514 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct tps51632_chip *tps = rdev_get_drvdata(rdev); - int bit = ramp_delay/6000; + int bit; int ret; - if (bit) - bit--; + if (ramp_delay == 0) + bit = 0; + else + bit = DIV_ROUND_UP(ramp_delay, 6000) - 1; + ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit)); if (ret < 0) dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret); -- 2.20.1