From c63d0cb5feedbc2cc456b6ea2105c15b563217cf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 29 Jan 2010 17:49:52 +0900 Subject: [PATCH] MIPS: Alchemy: Remove forced command line setting It is not always used, even if it is available. Signed-off-by: Yoichi Yuasa Cc: linux-mips Patchwork: http://patchwork.linux-mips.org/patch/893/ Signed-off-by: Ralf Baechle --- .../alchemy/devboards/db1x00/board_setup.c | 25 ------------------- .../alchemy/devboards/pb1000/board_setup.c | 10 -------- .../alchemy/devboards/pb1100/board_setup.c | 25 ------------------- .../alchemy/devboards/pb1200/board_setup.c | 14 ----------- .../alchemy/devboards/pb1500/board_setup.c | 16 ------------ .../alchemy/devboards/pb1550/board_setup.c | 10 -------- arch/mips/alchemy/mtx-1/board_setup.c | 10 -------- arch/mips/alchemy/xxs1500/board_setup.c | 10 -------- 8 files changed, 120 deletions(-) diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 56c541d0c55a..559d9b256db7 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -125,7 +125,6 @@ void __init board_setup(void) { unsigned long bcsr1, bcsr2; u32 pin_func; - char *argptr; bcsr1 = DB1000_BCSR_PHYS_ADDR; bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; @@ -159,30 +158,6 @@ void __init board_setup(void) /* initialize board register space */ bcsr_init(bcsr1, bcsr2); - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif - -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif - /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index 28b8bd278a16..b5311d8a29ab 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -47,19 +47,9 @@ void __init board_setup(void) u32 pin_func, static_cfg0; u32 sys_freqctrl, sys_clksrc; u32 prid = read_c0_prid(); - char *argptr; sys_freqctrl = 0; sys_clksrc = 0; - argptr = prom_getcmdline(); - -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index e0bd855f899b..c7b4caa81a35 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -47,35 +47,10 @@ void board_reset(void) void __init board_setup(void) { volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - char *argptr; bcsr_init(DB1000_BCSR_PHYS_ADDR, DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif - -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); alchemy_gpio1_input_enable(); diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 2cf59e728247..3184063f8042 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -56,24 +56,10 @@ void board_reset(void) void __init board_setup(void) { - char *argptr; - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); bcsr_init(PB1200_BCSR_PHYS_ADDR, PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#ifdef CONFIG_FB_AU1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif - #if 0 { u32 pin_func; diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 3f0c92cb35bd..fa9770ac358a 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -54,26 +54,10 @@ void __init board_setup(void) { u32 pin_func; u32 sys_freqctrl, sys_clksrc; - char *argptr; bcsr_init(DB1000_BCSR_PHYS_ADDR, DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif - sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index 0d060c3dd6f8..1e8fb3ddd726 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -56,20 +56,10 @@ void board_reset(void) void __init board_setup(void) { u32 pin_func; - char *argptr; bcsr_init(PB1550_BCSR_PHYS_ADDR, PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - alchemy_gpio2_enable(); /* diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index e2838c6185d3..a9f0336e1f1f 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -67,16 +67,6 @@ static void mtx1_power_off(void) void __init board_setup(void) { -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - alchemy_gpio2_enable(); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 7956afa78c4b..47b42927607b 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -51,16 +51,6 @@ void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - pm_power_off = xxs1500_power_off; _machine_halt = xxs1500_power_off; _machine_restart = xxs1500_reset; -- 2.20.1