From c63b3cba4f47ef9f4b3f952b4f923cf341d250ac Mon Sep 17 00:00:00 2001 From: Viresh KUMAR Date: Wed, 26 May 2010 14:42:10 -0700 Subject: [PATCH] sdhci-spear: ST SPEAr based SDHCI controller glue Add a glue layer to support the sdhci driver on the ST SPEAr platform. Signed-off-by: Viresh Kumar Cc: Cc: Linus Walleij Cc: Russell King Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 + drivers/mmc/host/Kconfig | 12 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-spear.c | 298 ++++++++++++++++++++++++++++++++ include/linux/mmc/sdhci-spear.h | 42 +++++ 5 files changed, 359 insertions(+) create mode 100644 drivers/mmc/host/sdhci-spear.c create mode 100644 include/linux/mmc/sdhci-spear.h diff --git a/MAINTAINERS b/MAINTAINERS index 18355cc1ce26..8b7eba2de603 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5004,6 +5004,12 @@ L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-s3c.c +SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER +M: Viresh Kumar +L: linux-mmc@vger.kernel.org +S: Maintained +F: drivers/mmc/host/sdhci-spear.c + SECURITY SUBSYSTEM M: James Morris L: linux-security-module@vger.kernel.org (suggested Cc:) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index aeecbc932fbd..e171e77f6129 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -136,6 +136,18 @@ config MMC_SDHCI_S3C If unsure, say N. +config MMC_SDHCI_SPEAR + tristate "SDHCI support on ST SPEAr platform" + depends on MMC_SDHCI && PLAT_SPEAR + help + This selects the Secure Digital Host Controller Interface (SDHCI) + often referrered to as the HSMMC block in some of the ST SPEAR range + of SoC + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_S3C_DMA bool "DMA support on S3C SDHCI" depends on MMC_SDHCI_S3C && EXPERIMENTAL diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 2447b66afeb3..e30c2ee48894 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o +obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c new file mode 100644 index 000000000000..d70c54c7b70a --- /dev/null +++ b/drivers/mmc/host/sdhci-spear.c @@ -0,0 +1,298 @@ +/* + * drivers/mmc/host/sdhci-spear.c + * + * Support of SDHCI platform devices for spear soc family + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar + * + * Inspired by sdhci-pltfm.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sdhci.h" + +struct spear_sdhci { + struct clk *clk; + struct sdhci_plat_data *data; +}; + +/* sdhci ops */ +static struct sdhci_ops sdhci_pltfm_ops = { + /* Nothing to do for now. */ +}; + +/* gpio card detection interrupt handler */ +static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct sdhci_host *host = platform_get_drvdata(pdev); + struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); + unsigned long gpio_irq_type; + int val; + + val = gpio_get_value(sdhci->data->card_int_gpio); + + /* val == 1 -> card removed, val == 0 -> card inserted */ + /* if card removed - set irq for low level, else vice versa */ + gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; + set_irq_type(irq, gpio_irq_type); + + if (sdhci->data->card_power_gpio >= 0) { + if (!sdhci->data->power_always_enb) { + /* if card inserted, give power, otherwise remove it */ + val = sdhci->data->power_active_high ? !val : val ; + gpio_set_value(sdhci->data->card_power_gpio, val); + } + } + + /* inform sdhci driver about card insertion/removal */ + tasklet_schedule(&host->card_tasklet); + + return IRQ_HANDLED; +} + +static int __devinit sdhci_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct resource *iomem; + struct spear_sdhci *sdhci; + int ret; + + BUG_ON(pdev == NULL); + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + ret = -ENOMEM; + dev_dbg(&pdev->dev, "memory resource not defined\n"); + goto err; + } + + if (!request_mem_region(iomem->start, resource_size(iomem), + "spear-sdhci")) { + ret = -EBUSY; + dev_dbg(&pdev->dev, "cannot request region\n"); + goto err; + } + + sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); + if (!sdhci) { + ret = -ENOMEM; + dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); + goto err_kzalloc; + } + + /* clk enable */ + sdhci->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(sdhci->clk)) { + ret = PTR_ERR(sdhci->clk); + dev_dbg(&pdev->dev, "Error getting clock\n"); + goto err_clk_get; + } + + ret = clk_enable(sdhci->clk); + if (ret) { + dev_dbg(&pdev->dev, "Error enabling clock\n"); + goto err_clk_enb; + } + + /* overwrite platform_data */ + sdhci->data = dev_get_platdata(&pdev->dev); + pdev->dev.platform_data = sdhci; + + if (pdev->dev.parent) + host = sdhci_alloc_host(pdev->dev.parent, 0); + else + host = sdhci_alloc_host(&pdev->dev, 0); + + if (IS_ERR(host)) { + ret = PTR_ERR(host); + dev_dbg(&pdev->dev, "error allocating host\n"); + goto err_alloc_host; + } + + host->hw_name = "sdhci"; + host->ops = &sdhci_pltfm_ops; + host->irq = platform_get_irq(pdev, 0); + host->quirks = SDHCI_QUIRK_BROKEN_ADMA; + + host->ioaddr = ioremap(iomem->start, resource_size(iomem)); + if (!host->ioaddr) { + ret = -ENOMEM; + dev_dbg(&pdev->dev, "failed to remap registers\n"); + goto err_ioremap; + } + + ret = sdhci_add_host(host); + if (ret) { + dev_dbg(&pdev->dev, "error adding host\n"); + goto err_add_host; + } + + platform_set_drvdata(pdev, host); + + /* + * It is optional to use GPIOs for sdhci Power control & sdhci card + * interrupt detection. If sdhci->data is NULL, then use original sdhci + * lines otherwise GPIO lines. + * If GPIO is selected for power control, then power should be disabled + * after card removal and should be enabled when card insertion + * interrupt occurs + */ + if (!sdhci->data) + return 0; + + if (sdhci->data->card_power_gpio >= 0) { + int val = 0; + + ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); + if (ret < 0) { + dev_dbg(&pdev->dev, "gpio request fail: %d\n", + sdhci->data->card_power_gpio); + goto err_pgpio_request; + } + + if (sdhci->data->power_always_enb) + val = sdhci->data->power_active_high; + else + val = !sdhci->data->power_active_high; + + ret = gpio_direction_output(sdhci->data->card_power_gpio, val); + if (ret) { + dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", + sdhci->data->card_power_gpio); + goto err_pgpio_direction; + } + + gpio_set_value(sdhci->data->card_power_gpio, 1); + } + + if (sdhci->data->card_int_gpio >= 0) { + ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); + if (ret < 0) { + dev_dbg(&pdev->dev, "gpio request fail: %d\n", + sdhci->data->card_int_gpio); + goto err_igpio_request; + } + + ret = gpio_direction_input(sdhci->data->card_int_gpio); + if (ret) { + dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", + sdhci->data->card_int_gpio); + goto err_igpio_direction; + } + ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), + sdhci_gpio_irq, IRQF_TRIGGER_LOW, + mmc_hostname(host->mmc), pdev); + if (ret) { + dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", + sdhci->data->card_int_gpio); + goto err_igpio_request_irq; + } + + } + + return 0; + +err_igpio_request_irq: +err_igpio_direction: + if (sdhci->data->card_int_gpio >= 0) + gpio_free(sdhci->data->card_int_gpio); +err_igpio_request: +err_pgpio_direction: + if (sdhci->data->card_power_gpio >= 0) + gpio_free(sdhci->data->card_power_gpio); +err_pgpio_request: + platform_set_drvdata(pdev, NULL); + sdhci_remove_host(host, 1); +err_add_host: + iounmap(host->ioaddr); +err_ioremap: + sdhci_free_host(host); +err_alloc_host: + clk_disable(sdhci->clk); +err_clk_enb: + clk_put(sdhci->clk); +err_clk_get: + kfree(sdhci); +err_kzalloc: + release_mem_region(iomem->start, resource_size(iomem)); +err: + dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); + return ret; +} + +static int __devexit sdhci_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); + int dead; + u32 scratch; + + if (sdhci->data) { + if (sdhci->data->card_int_gpio >= 0) { + free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); + gpio_free(sdhci->data->card_int_gpio); + } + + if (sdhci->data->card_power_gpio >= 0) + gpio_free(sdhci->data->card_power_gpio); + } + + platform_set_drvdata(pdev, NULL); + dead = 0; + scratch = readl(host->ioaddr + SDHCI_INT_STATUS); + if (scratch == (u32)-1) + dead = 1; + + sdhci_remove_host(host, dead); + iounmap(host->ioaddr); + sdhci_free_host(host); + clk_disable(sdhci->clk); + clk_put(sdhci->clk); + kfree(sdhci); + if (iomem) + release_mem_region(iomem->start, resource_size(iomem)); + + return 0; +} + +static struct platform_driver sdhci_driver = { + .driver = { + .name = "sdhci", + .owner = THIS_MODULE, + }, + .probe = sdhci_probe, + .remove = __devexit_p(sdhci_remove), +}; + +static int __init sdhci_init(void) +{ + return platform_driver_register(&sdhci_driver); +} +module_init(sdhci_init); + +static void __exit sdhci_exit(void) +{ + platform_driver_unregister(&sdhci_driver); +} +module_exit(sdhci_exit); + +MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); +MODULE_AUTHOR("Viresh Kumar "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h new file mode 100644 index 000000000000..9188c973f3e1 --- /dev/null +++ b/include/linux/mmc/sdhci-spear.h @@ -0,0 +1,42 @@ +/* + * include/linux/mmc/sdhci-spear.h + * + * SDHCI declarations specific to ST SPEAr platform + * + * Copyright (C) 2010 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef MMC_SDHCI_SPEAR_H +#define MMC_SDHCI_SPEAR_H + +#include +/* + * struct sdhci_plat_data: spear sdhci platform data structure + * + * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket + * @power_active_high: if set, enable power to sdhci socket by setting + * card_power_gpio + * @power_always_enb: If set, then enable power on probe, otherwise enable only + * on card insertion and disable on card removal. + * card_int_gpio: gpio pin used for card detection + */ +struct sdhci_plat_data { + int card_power_gpio; + int power_active_high; + int power_always_enb; + int card_int_gpio; +}; + +/* This function is used to set platform_data field of pdev->dev */ +static inline void +sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data) +{ + pdev->dev.platform_data = data; +} + +#endif /* MMC_SDHCI_SPEAR_H */ -- 2.20.1