From c5d294db75d16b30935fd3be8eef96d82f78355a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:01 +0300 Subject: [PATCH] ARM: dts: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus This GPIO expander is used for controlling various muxes on the board. By default select audio functionality over VIN6 by setting the P1 (vin6_sel_s0) pin to low. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index add77ac4f302..3694046c29eb 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -438,6 +438,20 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; + + pcf_hdmi: gpio@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; }; &i2c3 { -- 2.20.1