From c5771c7ddd117f25b9ef61307a3bbf6a5be37fa8 Mon Sep 17 00:00:00 2001 From: Ivan Safonov Date: Thu, 12 Jan 2017 12:16:55 +0300 Subject: [PATCH] staging:r8188eu: remove unused struct wifidirect_info and all corresponding code wifidirect_info structure is unused. Big amount of another definitions used only for wifidirect_info definition. Remove all. Signed-off-by: Ivan Safonov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/include/rtw_mlme.h | 177 ------------------- drivers/staging/rtl8188eu/include/wifi.h | 84 --------- 2 files changed, 261 deletions(-) diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme.h b/drivers/staging/rtl8188eu/include/rtw_mlme.h index 6d03f9493b27..7324a95bb162 100644 --- a/drivers/staging/rtl8188eu/include/rtw_mlme.h +++ b/drivers/staging/rtl8188eu/include/rtw_mlme.h @@ -107,183 +107,6 @@ struct rt_link_detect { * to Tx traffic. */ }; -struct profile_info { - u8 ssidlen; - u8 ssid[WLAN_SSID_MAXLEN]; - u8 peermac[ETH_ALEN]; -}; - -struct tx_invite_req_info { - u8 token; - u8 benable; - u8 go_ssid[WLAN_SSID_MAXLEN]; - u8 ssidlen; - u8 go_bssid[ETH_ALEN]; - u8 peer_macaddr[ETH_ALEN]; - u8 operating_ch; /* This information will be set by using the - * p2p_set op_ch=x */ - u8 peer_ch; /* The listen channel for peer P2P device */ -}; - -struct tx_invite_resp_info { - u8 token; /* Used to record the dialog token of p2p invitation - * request frame. */ -}; - -struct tx_provdisc_req_info { - u16 wps_config_method_request; /* Used when sending the - * provisioning request frame*/ - u16 peer_channel_num[2]; /* The channel number which the - * receiver stands. */ - struct ndis_802_11_ssid ssid; - u8 peerDevAddr[ETH_ALEN]; /* Peer device address */ - u8 peerIFAddr[ETH_ALEN]; /* Peer interface address */ - u8 benable; /* This provision discovery - * request frame is trigger - * to send or not */ -}; - -/* When peer device issue prov_disc_req first, we should store the following - * information */ -/* The UI must know this information to know which config method the - * remote p2p device needs. */ -struct rx_provdisc_req_info { - u8 peerDevAddr[ETH_ALEN]; /* Peer device address */ - u8 strconfig_method_desc_of_prov_disc_req[4]; /* description - * for the config method located in the provisioning - * discovery request frame. */ -}; - -struct tx_nego_req_info { - u16 peer_channel_num[2]; /* The channel number. */ - u8 peerDevAddr[ETH_ALEN]; /* Peer device address */ - u8 benable; /* This negotiation request frame is - * trigger to send or not */ -}; - -struct group_id_info { - u8 go_device_addr[ETH_ALEN]; /* The GO's device address of - * this P2P group */ - u8 ssid[WLAN_SSID_MAXLEN]; /* The SSID of this P2P group */ -}; - -struct scan_limit_info { - u8 scan_op_ch_only; /* When this flag is set, the driver - * should only scan the op. channel */ - u8 operation_ch[2]; /* Store the op. chan of invitation */ -}; - -struct wifidirect_info { - struct adapter *padapter; - struct timer_list find_phase_timer; - struct timer_list restore_p2p_state_timer; - - /* Used to do the scanning. After confirming the peer is availalble, - * the driver transmits the P2P frame to peer. */ - struct timer_list pre_tx_scan_timer; - struct timer_list reset_ch_sitesurvey; - struct timer_list reset_ch_sitesurvey2; /* Just for resetting the scan - * limit function by using p2p nego */ - struct tx_provdisc_req_info tx_prov_disc_info; - struct rx_provdisc_req_info rx_prov_disc_info; - struct tx_invite_req_info invitereq_info; - /* Store the profile information of persistent group */ - struct profile_info profileinfo[P2P_MAX_PERSISTENT_GROUP_NUM]; - struct tx_invite_resp_info inviteresp_info; - struct tx_nego_req_info nego_req_info; - /* Store the group id info when doing the group negot handshake. */ - struct group_id_info groupid_info; - /* Used for get the limit scan channel from the Invitation procedure */ - struct scan_limit_info rx_invitereq_info; - /* Used for get the limit scan chan from the P2P negotiation handshake*/ - struct scan_limit_info p2p_info; - enum P2P_ROLE role; - enum P2P_STATE pre_p2p_state; - enum P2P_STATE p2p_state; - /* The device address should be the mac address of this device. */ - u8 device_addr[ETH_ALEN]; - u8 interface_addr[ETH_ALEN]; - u8 social_chan[4]; - u8 listen_channel; - u8 operating_channel; - u8 listen_dwell; /* This value should be between 1 and 3 */ - u8 support_rate[8]; - u8 p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN]; - u8 intent; /* should only include the intent value. */ - u8 p2p_peer_interface_addr[ETH_ALEN]; - u8 p2p_peer_device_addr[ETH_ALEN]; - u8 peer_intent; /* Included the intent value and tie breaker value. */ - /* Device name for displaying on searching device screen */ - u8 device_name[WPS_MAX_DEVICE_NAME_LEN]; - u8 device_name_len; - u8 profileindex; /* Used to point to the index of profileinfo array */ - u8 peer_operating_ch; - u8 find_phase_state_exchange_cnt; - /* The device password ID for group negotiation */ - u16 device_password_id_for_nego; - u8 negotiation_dialog_token; - /* SSID information for group negotitation */ - u8 nego_ssid[WLAN_SSID_MAXLEN]; - u8 nego_ssidlen; - u8 p2p_group_ssid[WLAN_SSID_MAXLEN]; - u8 p2p_group_ssid_len; - /* Flag to know if the persistent function should be supported or not.*/ - u8 persistent_supported; - /* In the Sigma test, the Sigma will provide this enable from the - * sta_set_p2p CAPI. */ - /* 0: disable */ - /* 1: enable */ - u8 session_available; /* Flag to set the WFD session available to - * enable or disable "by Sigma" */ - /* In the Sigma test, the Sigma will disable the session available - * by using the sta_preset CAPI. */ - /* 0: disable */ - /* 1: enable */ - u8 wfd_tdls_enable; /* Flag to enable or disable the TDLS by WFD Sigma*/ - /* 0: disable */ - /* 1: enable */ - u8 wfd_tdls_weaksec; /* Flag to enable or disable the weak security - * function for TDLS by WFD Sigma */ - /* 0: disable */ - /* In this case, the driver can't issue the tdsl - * setup request frame. */ - /* 1: enable */ - /* In this case, the driver can issue the tdls - * setup request frame */ - /* even the current security is weak security. */ - - /* This field will store the WPS value (PIN value or PBC) that UI had - * got from the user. */ - enum P2P_WPSINFO ui_got_wps_info; - u16 supported_wps_cm; /* This field describes the WPS config method - * which this driver supported. */ - /* The value should be the combination of config - * method defined in page104 of WPS v2.0 spec.*/ - /* This field will contain the length of body of P2P Channel List - * attribute of group negotiation response frame. */ - uint channel_list_attr_len; - /* This field will contain the body of P2P Channel List attribute of - * group negotitation response frame. */ - /* We will use the channel_cnt and channel_list fields when constructing - * the group negotiation confirm frame. */ - u8 channel_list_attr[100]; - enum P2P_PS_MODE p2p_ps_mode; /* indicate p2p ps mode */ - enum P2P_PS_STATE p2p_ps_state; /* indicate p2p ps state */ - u8 noa_index; /* Identifies and instance of Notice of Absence timing. */ - u8 ctwindow; /* Client traffic window. A period of time in TU after TBTT. */ - u8 opp_ps; /* opportunistic power save. */ - u8 noa_num; /* number of NoA descriptor in P2P IE. */ - u8 noa_count[P2P_MAX_NOA_NUM]; /* Count for owner, Type of client. */ - /* Max duration for owner, preferred or min acceptable duration for - * client. */ - u32 noa_duration[P2P_MAX_NOA_NUM]; - /* Length of interval for owner, preferred or max acceptable interval - * of client. */ - u32 noa_interval[P2P_MAX_NOA_NUM]; - /* schedule expressed in terms of the lower 4 bytes of the TSF timer. */ - u32 noa_start_time[P2P_MAX_NOA_NUM]; -}; - struct mlme_priv { spinlock_t lock; int fw_state; /* shall we protect this variable? maybe not necessarily... */ diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h index e10de68d9a99..5630dcb1dd46 100644 --- a/drivers/staging/rtl8188eu/include/wifi.h +++ b/drivers/staging/rtl8188eu/include/wifi.h @@ -23,7 +23,6 @@ #define WLAN_HDR_A4_LEN 30 #define WLAN_HDR_A3_QOS_LEN 26 #define WLAN_HDR_A4_QOS_LEN 32 -#define WLAN_SSID_MAXLEN 32 #define WLAN_DATA_MAXLEN 2312 #define WLAN_A3_PN_OFFSET 24 @@ -644,9 +643,6 @@ enum ht_cap_ampdu_factor { #define WPS_ATTR_VENDOR_EXT 0x1049 #define WPS_ATTR_SELECTED_REGISTRAR 0x1041 -/* Value of WPS attribute "WPS_ATTR_DEVICE_NAME */ -#define WPS_MAX_DEVICE_NAME_LEN 32 - /* Value of WPS Request Type Attribute */ #define WPS_REQ_TYPE_ENROLLEE_INFO_ONLY 0x00 #define WPS_REQ_TYPE_ENROLLEE_OPEN_8021X 0x01 @@ -787,13 +783,8 @@ enum ht_cap_ampdu_factor { #define P2P_PRESENCE_RESPONSE 2 #define P2P_GO_DISC_REQUEST 3 - -#define P2P_MAX_PERSISTENT_GROUP_NUM 10 - #define P2P_PROVISIONING_SCAN_CNT 3 -#define P2P_WILDCARD_SSID_LEN 7 - /* default value, used when: (1)p2p disabled or (2)p2p enabled * but only do 1 scan phase */ #define P2P_FINDPHASE_EX_NONE 0 @@ -822,8 +813,6 @@ enum ht_cap_ampdu_factor { #define P2P_RESET_SCAN_CH 25000 #define P2P_MAX_INTENT 15 -#define P2P_MAX_NOA_NUM 2 - /* WPS Configuration Method */ #define WPS_CM_NONE 0x0000 #define WPS_CM_LABEL 0x0004 @@ -838,64 +827,6 @@ enum ht_cap_ampdu_factor { #define WPS_CM_SW_DISPLAY_P 0x2008 #define WPS_CM_LCD_DISPLAY_P 0x4008 -enum P2P_ROLE { - P2P_ROLE_DISABLE = 0, - P2P_ROLE_DEVICE = 1, - P2P_ROLE_CLIENT = 2, - P2P_ROLE_GO = 3 -}; - -enum P2P_STATE { - P2P_STATE_NONE = 0, /* P2P disable */ - /* P2P had enabled and do nothing */ - P2P_STATE_IDLE = 1, - P2P_STATE_LISTEN = 2, /* In pure listen state */ - P2P_STATE_SCAN = 3, /* In scan phase */ - /* In the listen state of find phase */ - P2P_STATE_FIND_PHASE_LISTEN = 4, - /* In the search state of find phase */ - P2P_STATE_FIND_PHASE_SEARCH = 5, - /* In P2P provisioning discovery */ - P2P_STATE_TX_PROVISION_DIS_REQ = 6, - P2P_STATE_RX_PROVISION_DIS_RSP = 7, - P2P_STATE_RX_PROVISION_DIS_REQ = 8, - /* Doing the group owner negotiation handshake */ - P2P_STATE_GONEGO_ING = 9, - /* finish the group negotiation handshake with success */ - P2P_STATE_GONEGO_OK = 10, - /* finish the group negotiation handshake with failure */ - P2P_STATE_GONEGO_FAIL = 11, - /* receiving the P2P Invitation request and match with the profile. */ - P2P_STATE_RECV_INVITE_REQ_MATCH = 12, - /* Doing the P2P WPS */ - P2P_STATE_PROVISIONING_ING = 13, - /* Finish the P2P WPS */ - P2P_STATE_PROVISIONING_DONE = 14, - /* Transmit the P2P Invitation request */ - P2P_STATE_TX_INVITE_REQ = 15, - /* Receiving the P2P Invitation response */ - P2P_STATE_RX_INVITE_RESP_OK = 16, - /* receiving the P2P Invitation request and dismatch with the profile. */ - P2P_STATE_RECV_INVITE_REQ_DISMATCH = 17, - /* receiving the P2P Invitation request and this wifi is GO. */ - P2P_STATE_RECV_INVITE_REQ_GO = 18, - /* receiving the P2P Invitation request to join an existing P2P Group. */ - P2P_STATE_RECV_INVITE_REQ_JOIN = 19, - /* receiving the P2P Invitation response with failure */ - P2P_STATE_RX_INVITE_RESP_FAIL = 20, - /* receiving p2p negotiation response with information is not available */ - P2P_STATE_RX_INFOR_NOREADY = 21, - /* sending p2p negotiation response with information is not available */ - P2P_STATE_TX_INFOR_NOREADY = 22, -}; - -enum P2P_WPSINFO { - P2P_NO_WPSINFO = 0, - P2P_GOT_WPSINFO_PEER_DISPLAY_PIN = 1, - P2P_GOT_WPSINFO_SELF_DISPLAY_PIN = 2, - P2P_GOT_WPSINFO_PBC = 3, -}; - #define P2P_PRIVATE_IOCTL_SET_LEN 64 enum P2P_PROTO_WK_ID { @@ -908,21 +839,6 @@ enum P2P_PROTO_WK_ID { P2P_RO_CH_WK = 6, }; -enum P2P_PS_STATE { - P2P_PS_DISABLE = 0, - P2P_PS_ENABLE = 1, - P2P_PS_SCAN = 2, - P2P_PS_SCAN_DONE = 3, - P2P_PS_ALLSTASLEEP = 4, /* for P2P GO */ -}; - -enum P2P_PS_MODE { - P2P_PS_NONE = 0, - P2P_PS_CTWINDOW = 1, - P2P_PS_NOA = 2, - P2P_PS_MIX = 3, /* CTWindow and NoA */ -}; - /* =====================WFD Section===================== */ /* For Wi-Fi Display */ #define WFD_ATTR_DEVICE_INFO 0x00 -- 2.20.1