From c51cb1a15676daed1d1a7fc8a0f2d1e3ae125361 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Jun 2016 22:28:09 +0200 Subject: [PATCH] ARM: dts: add I2C block in GSBI12 The I2C block on the GSBI12 is used on the APQ8060 Dragonboard for sensors. Make it available in the chipset file. Take this opportunity to fix the IRQ flag "0" to "NONE" using the IRQ DT include. Signed-off-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8660.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e7c6e2942f47..8ee3045f4066 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -122,11 +122,22 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <0 195 IRQ_TYPE_NONE>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; + + gsbi12_i2c: i2c@19c80000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19c80000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; qcom,ssbi@500000 { -- 2.20.1