From c4860ba2e11261a541632ceee8267ca490d9eb98 Mon Sep 17 00:00:00 2001 From: Aries Lee Date: Mon, 21 Nov 2011 10:20:42 +0000 Subject: [PATCH] jme: PHY configuration for compatible issue To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee Signed-off-by: Guo-Fu Tseng Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 113 ++++++++++++++++++++++++++++++++++++- drivers/net/ethernet/jme.h | 19 +++++++ 2 files changed, 129 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 7becff1f387d..76b84573566b 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1744,6 +1744,112 @@ jme_phy_off(struct jme_adapter *jme) jme_new_phy_off(jme); } +static int +jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_READ | specreg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); + return jme_mdio_read(jme->dev, jme->mii_if.phy_id, + JM_PHY_SPEC_DATA_REG); +} + +static void +jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data) +{ + u32 phy_addr; + + phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG, + phy_data); + jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG, + phy_addr); +} + +static int +jme_phy_calibration(struct jme_adapter *jme) +{ + u32 ctrl1000, phy_data; + + jme_phy_off(jme); + jme_phy_on(jme); + /* Enabel PHY test mode 1 */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + ctrl1000 |= PHY_GAD_TEST_MODE_1; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0; + phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH | + JM_PHY_EXT_COMM_2_CALI_ENABLE; + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + msleep(20); + phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG); + phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE | + JM_PHY_EXT_COMM_2_CALI_MODE_0 | + JM_PHY_EXT_COMM_2_CALI_LATCH); + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data); + + /* Disable PHY test mode */ + ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000); + ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK; + jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000); + return 0; +} + +static int +jme_phy_setEA(struct jme_adapter *jme) +{ + u32 phy_comm0 = 0, phy_comm1 = 0; + u8 nic_ctrl; + + pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl); + if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE) + return 0; + + switch (jme->pdev->device) { + case PCI_DEVICE_ID_JMICRON_JMC250: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + break; + case PCI_DEVICE_ID_JMICRON_JMC260: + if (((jme->chip_main_rev == 5) && + ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) || + (jme->chip_sub_rev == 3))) || + (jme->chip_main_rev >= 6)) { + phy_comm0 = 0x008A; + phy_comm1 = 0x4109; + } + if ((jme->chip_main_rev == 3) && + ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2))) + phy_comm0 = 0xE088; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0)) + phy_comm0 = 0x608A; + if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2)) + phy_comm0 = 0x408A; + break; + default: + return -ENODEV; + } + if (phy_comm0) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0); + if (phy_comm1) + jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1); + + return 0; +} + static int jme_open(struct net_device *netdev) { @@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_reset_link(jme); return 0; @@ -3184,7 +3291,8 @@ jme_resume(struct device *dev) jme_set_settings(netdev, &jme->old_ecmd); else jme_reset_phy_processor(jme); - + jme_phy_calibration(jme); + jme_phy_setEA(jme); jme_start_irq(jme); netif_device_attach(netdev); @@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); MODULE_DEVICE_TABLE(pci, jme_pci_tbl); - diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 02ea27c1dcb5..4304072bd3c5 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -760,6 +760,25 @@ enum jme_rxmcs_bits { RXMCS_CHECKSUM, }; +/* Extern PHY common register 2 */ + +#define PHY_GAD_TEST_MODE_1 0x00002000 +#define PHY_GAD_TEST_MODE_MSK 0x0000E000 +#define JM_PHY_SPEC_REG_READ 0x00004000 +#define JM_PHY_SPEC_REG_WRITE 0x00008000 +#define PHY_CALIBRATION_DELAY 20 +#define JM_PHY_SPEC_ADDR_REG 0x1E +#define JM_PHY_SPEC_DATA_REG 0x1F + +#define JM_PHY_EXT_COMM_0_REG 0x30 +#define JM_PHY_EXT_COMM_1_REG 0x31 +#define JM_PHY_EXT_COMM_2_REG 0x32 +#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01 +#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02 +#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10 +#define PCI_PRIV_SHARE_NICCTRL 0xF5 +#define JME_FLAG_PHYEA_ENABLE 0x2 + /* * Wakeup Frame setup interface registers */ -- 2.20.1