From c479ff093328c63ae9e496951a34f7fef550503a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 21 Oct 2014 13:33:56 +0200 Subject: [PATCH] gpio: sch: Consolidate core and resume banks This is actually a single device with two sets of identical registers, which just happen to start from a different offset. Instead of having separate GPIO chips created we consolidate them to be single GPIO chip. In addition having a single GPIO chip allows us to handle ACPI GPIO translation in the core in a more generic way, since the two GPIO chips share the same parent ACPI device. Signed-off-by: Mika Westerberg Acked-by: Linus Walleij Acked-by: Grant Likely Signed-off-by: Rafael J. Wysocki --- drivers/gpio/gpio-sch.c | 293 +++++++++++++++------------------------- 1 file changed, 112 insertions(+), 181 deletions(-) diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index 41e91d70301e..99720c8bc8ed 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -29,290 +29,221 @@ #include -static DEFINE_SPINLOCK(gpio_lock); - -#define CGEN (0x00) -#define CGIO (0x04) -#define CGLV (0x08) - -#define RGEN (0x20) -#define RGIO (0x24) -#define RGLV (0x28) - -static unsigned short gpio_ba; - -static int sch_gpio_core_direction_in(struct gpio_chip *gc, unsigned gpio_num) -{ - u8 curr_dirs; - unsigned short offset, bit; - - spin_lock(&gpio_lock); - - offset = CGIO + gpio_num / 8; - bit = gpio_num % 8; - - curr_dirs = inb(gpio_ba + offset); - - if (!(curr_dirs & (1 << bit))) - outb(curr_dirs | (1 << bit), gpio_ba + offset); +#define GEN 0x00 +#define GIO 0x04 +#define GLV 0x08 + +struct sch_gpio { + struct gpio_chip chip; + spinlock_t lock; + unsigned short iobase; + unsigned short core_base; + unsigned short resume_base; +}; - spin_unlock(&gpio_lock); - return 0; -} +#define to_sch_gpio(c) container_of(c, struct sch_gpio, chip) -static int sch_gpio_core_get(struct gpio_chip *gc, unsigned gpio_num) +static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio, + unsigned reg) { - int res; - unsigned short offset, bit; + unsigned base = 0; - offset = CGLV + gpio_num / 8; - bit = gpio_num % 8; + if (gpio >= sch->resume_base) { + gpio -= sch->resume_base; + base += 0x20; + } - res = !!(inb(gpio_ba + offset) & (1 << bit)); - return res; + return base + reg + gpio / 8; } -static void sch_gpio_core_set(struct gpio_chip *gc, unsigned gpio_num, int val) +static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio) { - u8 curr_vals; - unsigned short offset, bit; - - spin_lock(&gpio_lock); - - offset = CGLV + gpio_num / 8; - bit = gpio_num % 8; - - curr_vals = inb(gpio_ba + offset); - - if (val) - outb(curr_vals | (1 << bit), gpio_ba + offset); - else - outb((curr_vals & ~(1 << bit)), gpio_ba + offset); - spin_unlock(&gpio_lock); + if (gpio >= sch->resume_base) + gpio -= sch->resume_base; + return gpio % 8; } -static int sch_gpio_core_direction_out(struct gpio_chip *gc, - unsigned gpio_num, int val) +static void sch_gpio_enable(struct sch_gpio *sch, unsigned gpio) { - u8 curr_dirs; unsigned short offset, bit; + u8 enable; - spin_lock(&gpio_lock); + spin_lock(&sch->lock); - offset = CGIO + gpio_num / 8; - bit = gpio_num % 8; - - curr_dirs = inb(gpio_ba + offset); - if (curr_dirs & (1 << bit)) - outb(curr_dirs & ~(1 << bit), gpio_ba + offset); + offset = sch_gpio_offset(sch, gpio, GEN); + bit = sch_gpio_bit(sch, gpio); - spin_unlock(&gpio_lock); + enable = inb(sch->iobase + offset); + if (!(enable & (1 << bit))) + outb(enable | (1 << bit), sch->iobase + offset); - /* - * according to the datasheet, writing to the level register has no - * effect when GPIO is programmed as input. - * Actually the the level register is read-only when configured as input. - * Thus presetting the output level before switching to output is _NOT_ possible. - * Hence we set the level after configuring the GPIO as output. - * But we cannot prevent a short low pulse if direction is set to high - * and an external pull-up is connected. - */ - sch_gpio_core_set(gc, gpio_num, val); - return 0; + spin_unlock(&sch->lock); } -static struct gpio_chip sch_gpio_core = { - .label = "sch_gpio_core", - .owner = THIS_MODULE, - .direction_input = sch_gpio_core_direction_in, - .get = sch_gpio_core_get, - .direction_output = sch_gpio_core_direction_out, - .set = sch_gpio_core_set, -}; - -static int sch_gpio_resume_direction_in(struct gpio_chip *gc, - unsigned gpio_num) +static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num) { + struct sch_gpio *sch = to_sch_gpio(gc); u8 curr_dirs; unsigned short offset, bit; - spin_lock(&gpio_lock); + spin_lock(&sch->lock); - offset = RGIO + gpio_num / 8; - bit = gpio_num % 8; + offset = sch_gpio_offset(sch, gpio_num, GIO); + bit = sch_gpio_bit(sch, gpio_num); - curr_dirs = inb(gpio_ba + offset); + curr_dirs = inb(sch->iobase + offset); if (!(curr_dirs & (1 << bit))) - outb(curr_dirs | (1 << bit), gpio_ba + offset); + outb(curr_dirs | (1 << bit), sch->iobase + offset); - spin_unlock(&gpio_lock); + spin_unlock(&sch->lock); return 0; } -static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num) +static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num) { + struct sch_gpio *sch = to_sch_gpio(gc); + int res; unsigned short offset, bit; - offset = RGLV + gpio_num / 8; - bit = gpio_num % 8; + offset = sch_gpio_offset(sch, gpio_num, GLV); + bit = sch_gpio_bit(sch, gpio_num); + + res = !!(inb(sch->iobase + offset) & (1 << bit)); - return !!(inb(gpio_ba + offset) & (1 << bit)); + return res; } -static void sch_gpio_resume_set(struct gpio_chip *gc, - unsigned gpio_num, int val) +static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val) { + struct sch_gpio *sch = to_sch_gpio(gc); u8 curr_vals; unsigned short offset, bit; - spin_lock(&gpio_lock); + spin_lock(&sch->lock); - offset = RGLV + gpio_num / 8; - bit = gpio_num % 8; + offset = sch_gpio_offset(sch, gpio_num, GLV); + bit = sch_gpio_bit(sch, gpio_num); - curr_vals = inb(gpio_ba + offset); + curr_vals = inb(sch->iobase + offset); if (val) - outb(curr_vals | (1 << bit), gpio_ba + offset); + outb(curr_vals | (1 << bit), sch->iobase + offset); else - outb((curr_vals & ~(1 << bit)), gpio_ba + offset); + outb((curr_vals & ~(1 << bit)), sch->iobase + offset); - spin_unlock(&gpio_lock); + spin_unlock(&sch->lock); } -static int sch_gpio_resume_direction_out(struct gpio_chip *gc, - unsigned gpio_num, int val) +static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num, + int val) { + struct sch_gpio *sch = to_sch_gpio(gc); u8 curr_dirs; unsigned short offset, bit; - offset = RGIO + gpio_num / 8; - bit = gpio_num % 8; + spin_lock(&sch->lock); - spin_lock(&gpio_lock); + offset = sch_gpio_offset(sch, gpio_num, GIO); + bit = sch_gpio_bit(sch, gpio_num); - curr_dirs = inb(gpio_ba + offset); + curr_dirs = inb(sch->iobase + offset); if (curr_dirs & (1 << bit)) - outb(curr_dirs & ~(1 << bit), gpio_ba + offset); + outb(curr_dirs & ~(1 << bit), sch->iobase + offset); - spin_unlock(&gpio_lock); + spin_unlock(&sch->lock); /* - * according to the datasheet, writing to the level register has no - * effect when GPIO is programmed as input. - * Actually the the level register is read-only when configured as input. - * Thus presetting the output level before switching to output is _NOT_ possible. - * Hence we set the level after configuring the GPIO as output. - * But we cannot prevent a short low pulse if direction is set to high - * and an external pull-up is connected. - */ - sch_gpio_resume_set(gc, gpio_num, val); + * according to the datasheet, writing to the level register has no + * effect when GPIO is programmed as input. + * Actually the the level register is read-only when configured as input. + * Thus presetting the output level before switching to output is _NOT_ possible. + * Hence we set the level after configuring the GPIO as output. + * But we cannot prevent a short low pulse if direction is set to high + * and an external pull-up is connected. + */ + sch_gpio_set(gc, gpio_num, val); return 0; } -static struct gpio_chip sch_gpio_resume = { - .label = "sch_gpio_resume", +static struct gpio_chip sch_gpio_chip = { + .label = "sch_gpio", .owner = THIS_MODULE, - .direction_input = sch_gpio_resume_direction_in, - .get = sch_gpio_resume_get, - .direction_output = sch_gpio_resume_direction_out, - .set = sch_gpio_resume_set, + .direction_input = sch_gpio_direction_in, + .get = sch_gpio_get, + .direction_output = sch_gpio_direction_out, + .set = sch_gpio_set, }; static int sch_gpio_probe(struct platform_device *pdev) { + struct sch_gpio *sch; struct resource *res; - int err, id; - id = pdev->id; - if (!id) - return -ENODEV; + sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL); + if (!sch) + return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) return -EBUSY; - if (!request_region(res->start, resource_size(res), pdev->name)) + if (!devm_request_region(&pdev->dev, res->start, resource_size(res), + pdev->name)) return -EBUSY; - gpio_ba = res->start; + spin_lock_init(&sch->lock); + sch->iobase = res->start; + sch->chip = sch_gpio_chip; + sch->chip.label = dev_name(&pdev->dev); + sch->chip.dev = &pdev->dev; - switch (id) { + switch (pdev->id) { case PCI_DEVICE_ID_INTEL_SCH_LPC: - sch_gpio_core.base = 0; - sch_gpio_core.ngpio = 10; - sch_gpio_resume.base = 10; - sch_gpio_resume.ngpio = 4; + sch->core_base = 0; + sch->resume_base = 10; + sch->chip.ngpio = 14; + /* * GPIO[6:0] enabled by default * GPIO7 is configured by the CMC as SLPIOVR * Enable GPIO[9:8] core powered gpios explicitly */ - outb(0x3, gpio_ba + CGEN + 1); + sch_gpio_enable(sch, 8); + sch_gpio_enable(sch, 9); /* * SUS_GPIO[2:0] enabled by default * Enable SUS_GPIO3 resume powered gpio explicitly */ - outb(0x8, gpio_ba + RGEN); + sch_gpio_enable(sch, 13); break; case PCI_DEVICE_ID_INTEL_ITC_LPC: - sch_gpio_core.base = 0; - sch_gpio_core.ngpio = 5; - sch_gpio_resume.base = 5; - sch_gpio_resume.ngpio = 9; + sch->core_base = 0; + sch->resume_base = 5; + sch->chip.ngpio = 14; break; case PCI_DEVICE_ID_INTEL_CENTERTON_ILB: - sch_gpio_core.base = 0; - sch_gpio_core.ngpio = 21; - sch_gpio_resume.base = 21; - sch_gpio_resume.ngpio = 9; + sch->core_base = 0; + sch->resume_base = 21; + sch->chip.ngpio = 30; break; default: - err = -ENODEV; - goto err_sch_gpio_core; + return -ENODEV; } - sch_gpio_core.dev = &pdev->dev; - sch_gpio_resume.dev = &pdev->dev; - - err = gpiochip_add(&sch_gpio_core); - if (err < 0) - goto err_sch_gpio_core; + platform_set_drvdata(pdev, sch); - err = gpiochip_add(&sch_gpio_resume); - if (err < 0) - goto err_sch_gpio_resume; - - return 0; - -err_sch_gpio_resume: - gpiochip_remove(&sch_gpio_core); - -err_sch_gpio_core: - release_region(res->start, resource_size(res)); - gpio_ba = 0; - - return err; + return gpiochip_add(&sch->chip); } static int sch_gpio_remove(struct platform_device *pdev) { - struct resource *res; - if (gpio_ba) { - - gpiochip_remove(&sch_gpio_core); - gpiochip_remove(&sch_gpio_resume); - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - - release_region(res->start, resource_size(res)); - gpio_ba = 0; - } + struct sch_gpio *sch = platform_get_drvdata(pdev); + gpiochip_remove(&sch->chip); return 0; } -- 2.20.1