From c3f8be961808313a502c67d59e2b7f930477faf3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 19 Sep 2005 15:37:34 -0700 Subject: [PATCH] [PATCH] skge: expand ethtool debug register dump Expand the returned data for ethtool debug access to include all of the mapped PCI area; except for the small set of registers that are for diagnostic RAM access. Access to those registers will hang the system. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 0208258e7826..62e2ae0eb858 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -105,41 +105,28 @@ static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 }; -/* Don't need to look at whole 16K. - * last interesting register is descriptor poll timer. - */ -#define SKGE_REGS_LEN (29*128) - static int skge_get_regs_len(struct net_device *dev) { - return SKGE_REGS_LEN; + return 0x4000; } /* - * Returns copy of control register region - * I/O region is divided into banks and certain regions are unreadable + * Returns copy of whole control register region + * Note: skip RAM address register because accessing it will + * cause bus hangs! */ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) { const struct skge_port *skge = netdev_priv(dev); - unsigned long offs; const void __iomem *io = skge->hw->regs; - static const unsigned long bankmap - = (1<<0) | (1<<2) | (1<<8) | (1<<9) - | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16) - | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23) - | (1<<24) | (1<<25) | (1<<26) | (1<<27) | (1<<28); regs->version = 1; - for (offs = 0; offs < regs->len; offs += 128) { - u32 len = min_t(u32, 128, regs->len - offs); + memset(p, 0, regs->len); + memcpy_fromio(p, io, B3_RAM_ADDR); - if (bankmap & (1<<(offs/128))) - memcpy_fromio(p + offs, io + offs, len); - else - memset(p + offs, 0, len); - } + memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); } /* Wake on Lan only supported on Yukon chps with rev 1 or above */ -- 2.20.1