From c1c98dadb2de5d9645bdd142536ca81ca28361f7 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 2 Feb 2017 13:48:06 -0600 Subject: [PATCH] dt/bindings: Add a serial/UART attached device binding Add a common binding for describing serial/UART attached devices. Common examples are Bluetooth, WiFi, NFC and GPS devices. Serial attached devices are represented as child nodes of a UART node. This may need to be extended for more complex devices with multiple interfaces, but for the simple cases a child node is sufficient. Tested-By: Sebastian Reichel Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- .../bindings/serial/slave-device.txt | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt new file mode 100644 index 000000000000..f66037928f5f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/slave-device.txt @@ -0,0 +1,36 @@ +Serial Slave Device DT binding + +This documents the binding structure and common properties for serial +attached devices. Common examples include Bluetooth, WiFi, NFC and GPS +devices. + +Serial attached devices shall be a child node of the host UART device the +slave device is attached to. It is expected that the attached device is +the only child node of the UART device. The slave device node name shall +reflect the generic type of device for the node. + +Required Properties: + +- compatible : A string reflecting the vendor and specific device the node + represents. + +Optional Properties: + +- max-speed : The maximum baud rate the device operates at. This should + only be present if the maximum is less than the slave device + can support. For example, a particular board has some signal + quality issue or the host processor can't support higher + baud rates. + +Example: + +serial@1234 { + compatible = "ns16550a"; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; +}; -- 2.20.1