From c1821c95c13240c2c8d3da8845c2021e575e29c6 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 19 Apr 2011 16:52:59 -0700 Subject: [PATCH] iwlagn: connect and disconnect sequence for RXON No functional changes, separate the connect and disconnect sequences in RXON commit function, easier to read and understand. Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 194 +++++++++++--------- 1 file changed, 111 insertions(+), 83 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 7f52ab8f5848..178b2b5a53b4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -169,6 +169,103 @@ static int iwlagn_send_rxon_assoc(struct iwl_priv *priv, return ret; } +static int iwlagn_rxon_disconn(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret; + struct iwl_rxon_cmd *active = (void *)&ctx->active; + + if (ctx->ctxid == IWL_RXON_CTX_BSS) + ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); + else + ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); + if (ret) + return ret; + + /* + * Un-assoc RXON clears the station table and WEP + * keys, so we have to restore those afterwards. + */ + iwl_clear_ucode_stations(priv, ctx); + iwl_restore_stations(priv, ctx); + ret = iwl_restore_default_wep_keys(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); + return ret; + } + + memcpy(active, &ctx->staging, sizeof(*active)); + return 0; +} + +static int iwlagn_rxon_connect(struct iwl_priv *priv, + struct iwl_rxon_context *ctx) +{ + int ret; + struct iwl_rxon_cmd *active = (void *)&ctx->active; + + /* RXON timing must be before associated RXON */ + ret = iwl_send_rxon_timing(priv, ctx); + if (ret) { + IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); + return ret; + } + /* QoS info may be cleared by previous un-assoc RXON */ + iwlagn_update_qos(priv, ctx); + + /* + * We'll run into this code path when beaconing is + * enabled, but then we also need to send the beacon + * to the device. + */ + if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { + ret = iwlagn_update_beacon(priv, ctx->vif); + if (ret) { + IWL_ERR(priv, + "Error sending required beacon (%d)!\n", + ret); + return ret; + } + } + + priv->start_calib = 0; + /* + * Apply the new configuration. + * + * Associated RXON doesn't clear the station table in uCode, + * so we don't need to restore stations etc. after this. + */ + ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, + sizeof(struct iwl_rxon_cmd), &ctx->staging); + if (ret) { + IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); + return ret; + } + memcpy(active, &ctx->staging, sizeof(*active)); + + iwl_reprogram_ap_sta(priv, ctx); + + /* IBSS beacon needs to be sent after setting assoc */ + if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) + if (iwlagn_update_beacon(priv, ctx->vif)) + IWL_ERR(priv, "Error sending IBSS beacon\n"); + iwl_init_sensitivity(priv); + + /* + * If we issue a new RXON command which required a tune then + * we must send a new TXPOWER command or we won't be able to + * Tx any frames. + * + * It's expected we set power here if channel is changing. + */ + ret = iwl_set_tx_power(priv, priv->tx_power_next, true); + if (ret) { + IWL_ERR(priv, "Error sending TX power (%d)\n", ret); + return ret; + } + return 0; +} + /** * iwlagn_commit_rxon - commit staging_rxon to hardware * @@ -176,6 +273,16 @@ static int iwlagn_send_rxon_assoc(struct iwl_priv *priv, * the active_rxon structure is updated with the new data. This * function correctly transitions out of the RXON_ASSOC_MSK state if * a HW tune is required based on the RXON structure changes. + * + * The connect/disconnect flow should be as the following: + * + * 1. make sure send RXON command with association bit unset if not connect + * this should include the channel and the band for the candidate + * to be connected to + * 2. Add Station before RXON association with the AP + * 3. RXON_timing has to send before RXON for connection + * 4. full RXON command - associated bit set + * 5. use RXON_ASSOC command to update any flags changes */ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { @@ -225,6 +332,7 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) else ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; + iwl_print_rx_config_cmd(priv, ctx); ret = iwl_check_rxon_cmd(priv, ctx); if (ret) { IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); @@ -255,7 +363,6 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } memcpy(active, &ctx->staging, sizeof(*active)); - iwl_print_rx_config_cmd(priv, ctx); return 0; } @@ -283,92 +390,13 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) * set up filters in the device. */ if ((old_assoc && new_assoc) || !new_assoc) { - if (ctx->ctxid == IWL_RXON_CTX_BSS) - ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); - else - ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); + ret = iwlagn_rxon_disconn(priv, ctx); if (ret) return ret; - - memcpy(active, &ctx->staging, sizeof(*active)); - - /* - * Un-assoc RXON clears the station table and WEP - * keys, so we have to restore those afterwards. - */ - iwl_clear_ucode_stations(priv, ctx); - iwl_restore_stations(priv, ctx); - ret = iwl_restore_default_wep_keys(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); - return ret; - } } - /* RXON timing must be before associated RXON */ - ret = iwl_send_rxon_timing(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); - return ret; - } - - if (new_assoc) { - /* QoS info may be cleared by previous un-assoc RXON */ - iwlagn_update_qos(priv, ctx); - - /* - * We'll run into this code path when beaconing is - * enabled, but then we also need to send the beacon - * to the device. - */ - if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { - ret = iwlagn_update_beacon(priv, ctx->vif); - if (ret) { - IWL_ERR(priv, - "Error sending required beacon (%d)!\n", - ret); - return ret; - } - } - - priv->start_calib = 0; - /* - * Apply the new configuration. - * - * Associated RXON doesn't clear the station table in uCode, - * so we don't need to restore stations etc. after this. - */ - ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, - sizeof(struct iwl_rxon_cmd), &ctx->staging); - if (ret) { - IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); - return ret; - } - memcpy(active, &ctx->staging, sizeof(*active)); - - iwl_reprogram_ap_sta(priv, ctx); - - /* IBSS beacon needs to be sent after setting assoc */ - if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) - if (iwlagn_update_beacon(priv, ctx->vif)) - IWL_ERR(priv, "Error sending IBSS beacon\n"); - } - - iwl_print_rx_config_cmd(priv, ctx); - - iwl_init_sensitivity(priv); - - /* - * If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames. - * - * It's expected we set power here if channel is changing. - */ - ret = iwl_set_tx_power(priv, priv->tx_power_next, true); - if (ret) { - IWL_ERR(priv, "Error sending TX power (%d)\n", ret); - return ret; - } + if (new_assoc) + return iwlagn_rxon_connect(priv, ctx); return 0; } -- 2.20.1