From c11e3b48dbc367e38dfaea6e8a61d3b39f476685 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 26 Aug 2016 15:17:35 +0100 Subject: [PATCH] MIPS: SEAD3: Probe UARTs using DT Probe the UARTs on SEAD3 boards using device tree rather than platform code, in order to reduce the amount of the latter. This requires that CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig. The SEAD3 DT shim code is extended to read bootloader environment variables to determine the appropriate UART & mode for kernel console output & set the stdout-path property of the chosen node accordingly. In contrast to the old platform code, which appears to have only ever set "console=ttyS0,38400n8r" with the code in console_config never having an effect, this will honor the "yamontty" environment variable to select between the 2 UARTs on the board and then check the "modetty0" or "modetty1" variable as appropriate to determine the UART configuration. Signed-off-by: Paul Burton Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14048/ Signed-off-by: Ralf Baechle --- arch/mips/boot/dts/mti/sead3.dts | 37 +++++++ arch/mips/configs/sead3_defconfig | 2 + arch/mips/include/asm/mips-boards/sead3int.h | 4 - arch/mips/mti-sead3/sead3-dtshim.c | 105 ++++++++++++++++++- arch/mips/mti-sead3/sead3-init.c | 46 -------- arch/mips/mti-sead3/sead3-platform.c | 30 ------ 6 files changed, 143 insertions(+), 81 deletions(-) diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts index 051b3a9e5a9e..3f681c530082 100644 --- a/arch/mips/boot/dts/mti/sead3.dts +++ b/arch/mips/boot/dts/mti/sead3.dts @@ -12,6 +12,15 @@ compatible = "mti,sead-3"; interrupt-parent = <&gic>; + chosen { + stdout-path = "uart1:115200"; + }; + + aliases { + uart0 = &uart0; + uart1 = &uart1; + }; + cpus { cpu@0 { compatible = "mti,mips14KEc", "mti,mips14Kc"; @@ -50,4 +59,32 @@ interrupts = ; }; }; + + /* UART connected to FTDI & miniUSB socket */ + uart0: uart@1f000900 { + compatible = "ns16550a"; + reg = <0x1f000900 0x20>; + reg-io-width = <4>; + reg-shift = <2>; + + clock-frequency = <14745600>; + + interrupts = <3>; /* GIC 3 or CPU 4 */ + + no-loopback-test; + }; + + /* UART connected to RS232 socket */ + uart1: uart@1f000800 { + compatible = "ns16550a"; + reg = <0x1f000800 0x20>; + reg-io-width = <4>; + reg-shift = <2>; + + clock-frequency = <14745600>; + + interrupts = <2>; /* GIC 2 or CPU 4 */ + + no-loopback-test; + }; }; diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig index dae9354b6256..deb48fb77d1f 100644 --- a/arch/mips/configs/sead3_defconfig +++ b/arch/mips/configs/sead3_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y +CONFIG_OF=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_SCSI=y @@ -70,6 +71,7 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h index bd85da3d6770..3a5e079fda76 100644 --- a/arch/mips/include/asm/mips-boards/sead3int.h +++ b/arch/mips/include/asm/mips-boards/sead3int.h @@ -14,14 +14,10 @@ /* CPU interrupt offsets */ #define CPU_INT_EHCI 2 -#define CPU_INT_UART0 4 -#define CPU_INT_UART1 4 #define CPU_INT_NET 6 /* GIC interrupt offsets */ #define GIC_INT_NET GIC_SHARED_TO_HWIRQ(0) -#define GIC_INT_UART1 GIC_SHARED_TO_HWIRQ(2) -#define GIC_INT_UART0 GIC_SHARED_TO_HWIRQ(3) #define GIC_INT_EHCI GIC_SHARED_TO_HWIRQ(5) #endif /* !(_MIPS_SEAD3INT_H) */ diff --git a/arch/mips/mti-sead3/sead3-dtshim.c b/arch/mips/mti-sead3/sead3-dtshim.c index 3283a7e19a88..b462f65b8ce0 100644 --- a/arch/mips/mti-sead3/sead3-dtshim.c +++ b/arch/mips/mti-sead3/sead3-dtshim.c @@ -14,6 +14,7 @@ #include #include +#include #include #define SEAD_CONFIG CKSEG1ADDR(0x1b100110) @@ -23,7 +24,8 @@ static unsigned char fdt_buf[16 << 10] __initdata; static int remove_gic(void *fdt) { - int gic_off, cpu_off, err; + const unsigned int cpu_uart_int = 4; + int gic_off, cpu_off, uart_off, err; uint32_t cfg, cpu_phandle; /* leave the GIC node intact if a GIC is present */ @@ -62,6 +64,103 @@ static int remove_gic(void *fdt) return err; } + uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a"); + while (uart_off >= 0) { + err = fdt_setprop_u32(fdt, uart_off, "interrupts", + cpu_uart_int); + if (err) { + pr_err("unable to set UART interrupts property: %d\n", + err); + return err; + } + + uart_off = fdt_node_offset_by_compatible(fdt, uart_off, + "ns16550a"); + } + if (uart_off != -FDT_ERR_NOTFOUND) { + pr_err("error searching for UART DT node: %d\n", uart_off); + return uart_off; + } + + return 0; +} + +static int serial_config(void *fdt) +{ + const char *yamontty, *mode_var; + char mode_var_name[9], path[18], parity; + unsigned int uart, baud, stop_bits; + bool hw_flow; + int chosen_off, err; + + yamontty = fw_getenv("yamontty"); + if (!yamontty || !strcmp(yamontty, "tty0")) { + uart = 0; + } else if (!strcmp(yamontty, "tty1")) { + uart = 1; + } else { + pr_warn("yamontty environment variable '%s' invalid\n", + yamontty); + uart = 0; + } + + baud = stop_bits = 0; + parity = 0; + hw_flow = false; + + snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart); + mode_var = fw_getenv(mode_var_name); + if (mode_var) { + while (mode_var[0] >= '0' && mode_var[0] <= '9') { + baud *= 10; + baud += mode_var[0] - '0'; + mode_var++; + } + if (mode_var[0] == ',') + mode_var++; + if (mode_var[0]) + parity = mode_var[0]; + if (mode_var[0] == ',') + mode_var++; + if (mode_var[0]) + stop_bits = mode_var[0] - '0'; + if (mode_var[0] == ',') + mode_var++; + if (!strcmp(mode_var, "hw")) + hw_flow = true; + } + + if (!baud) + baud = 38400; + + if (parity != 'e' && parity != 'n' && parity != 'o') + parity = 'n'; + + if (stop_bits != 7 && stop_bits != 8) + stop_bits = 8; + + WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s", + uart, baud, parity, stop_bits, + hw_flow ? "r" : "") >= sizeof(path)); + + /* find or add chosen node */ + chosen_off = fdt_path_offset(fdt, "/chosen"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_path_offset(fdt, "/chosen@0"); + if (chosen_off == -FDT_ERR_NOTFOUND) + chosen_off = fdt_add_subnode(fdt, 0, "chosen"); + if (chosen_off < 0) { + pr_err("Unable to find or add DT chosen node: %d\n", + chosen_off); + return chosen_off; + } + + err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path); + if (err) { + pr_err("Unable to set stdout-path property: %d\n", err); + return err; + } + return 0; } @@ -84,6 +183,10 @@ void __init *sead3_dt_shim(void *fdt) if (err) panic("Unable to patch FDT: %d", err); + err = serial_config(fdt_buf); + if (err) + panic("Unable to patch FDT: %d", err); + err = fdt_pack(fdt_buf); if (err) panic("Unable to pack FDT: %d\n", err); diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c index 3572ea30173e..e81f5b7657f0 100644 --- a/arch/mips/mti-sead3/sead3-init.c +++ b/arch/mips/mti-sead3/sead3-init.c @@ -17,47 +17,6 @@ extern char except_vec_nmi; extern char except_vec_ejtag_debug; -#ifdef CONFIG_SERIAL_8250_CONSOLE -static void __init console_config(void) -{ - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - - if ((strstr(fw_getcmdline(), "console=")) == NULL) { - s = fw_getenv("modetty0"); - if (s) { - while (*s >= '0' && *s <= '9') - baud = baud*10 + *s++ - '0'; - if (*s == ',') - s++; - if (*s) - parity = *s++; - if (*s == ',') - s++; - if (*s) - bits = *s++; - if (*s == ',') - s++; - if (*s == 'h') - flow = 'r'; - } - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, - parity, bits, flow); - strcat(fw_getcmdline(), console_string); - } -} -#endif - static void __init mips_nmi_setup(void) { void *base; @@ -140,11 +99,6 @@ void __init prom_init(void) else if ((strstr(fw_getcmdline(), "console=ttyS1")) != NULL) fw_init_early_console(1); #endif -#ifdef CONFIG_SERIAL_8250_CONSOLE - if ((strstr(fw_getcmdline(), "console=")) == NULL) - strcat(fw_getcmdline(), " console=ttyS0,38400n8r"); - console_config(); -#endif } void __init prom_free_prom_memory(void) diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c index d6be0298056a..538a6f8f0917 100644 --- a/arch/mips/mti-sead3/sead3-platform.c +++ b/arch/mips/mti-sead3/sead3-platform.c @@ -14,35 +14,10 @@ #include #include #include -#include #include #include -#define UART(base) \ -{ \ - .mapbase = base, \ - .irq = -1, \ - .uartclk = 14745600, \ - .iotype = UPIO_MEM32, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \ - .regshift = 2, \ -} - -static struct plat_serial8250_port uart8250_data[] = { - UART(0x1f000900), /* ttyS0 = USB */ - UART(0x1f000800), /* ttyS1 = RS232 */ - { }, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = uart8250_data, - }, -}; - static struct smsc911x_platform_config sead3_smsc911x_data = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, @@ -195,7 +170,6 @@ static struct platform_device ehci_device = { }; static struct platform_device *sead3_platform_devices[] __initdata = { - &uart8250_device, &sead3_flash, &pled_device, &fled_device, @@ -228,15 +202,11 @@ static int __init sead3_platforms_device_init(void) } if (gic_present) { - uart8250_data[0].irq = irq_create_mapping(irqd, GIC_INT_UART0); - uart8250_data[1].irq = irq_create_mapping(irqd, GIC_INT_UART1); ehci_resources[1].start = irq_create_mapping(irqd, GIC_INT_EHCI); sead3_net_resources[1].start = irq_create_mapping(irqd, GIC_INT_NET); } else { - uart8250_data[0].irq = irq_create_mapping(irqd, CPU_INT_UART0); - uart8250_data[1].irq = irq_create_mapping(irqd, CPU_INT_UART1); ehci_resources[1].start = irq_create_mapping(irqd, CPU_INT_EHCI); sead3_net_resources[1].start = -- 2.20.1