From c0a5962f761b5c7c312d829c16c2856be6d494db Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 3 Jun 2009 09:47:57 -0700
Subject: [PATCH] Staging: pata_rdc: remove function prototypes
Move code around so we do not need the function prototypes anymore.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/staging/pata_rdc/pata_rdc.c | 1177 +++++++++++++--------------
drivers/staging/pata_rdc/pata_rdc.h | 30 -
2 files changed, 578 insertions(+), 629 deletions(-)
diff --git a/drivers/staging/pata_rdc/pata_rdc.c b/drivers/staging/pata_rdc/pata_rdc.c
index 5d52373eeec0..ab0e1cce40ca 100644
--- a/drivers/staging/pata_rdc/pata_rdc.c
+++ b/drivers/staging/pata_rdc/pata_rdc.c
@@ -36,50 +36,9 @@ static const struct pci_device_id rdc_pata_id_table[] = {
{ 0x17F3, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_17F31012},
{ } /* terminate list */
};
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("this version author is RDC"); /* replace "RDC" with the last maintainer. */
-MODULE_DESCRIPTION("RDC PCI IDE Driver");
MODULE_DEVICE_TABLE(pci, rdc_pata_id_table);
-MODULE_VERSION(DRIVER_VERSION);
-
-/* a pci driver */
-static struct pci_driver rdc_pata_driver = {
- .name = DRIVER_NAME,
- .id_table = rdc_pata_id_table,
- .probe = rdc_init_one,
- .remove = ata_pci_remove_one,
-#ifdef CONFIG_PM
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
-#endif
-};
static unsigned int in_module_init = 1; /* hotplugging check??? */
-static int __init pata_rdc_init(void)
-{
- int rc;
-
- dbgprintf("pata_rdc_init\n");
- rc = pci_register_driver(&rdc_pata_driver);
- if (rc) {
- dbgprintf("pata_rdc_init faile\n");
- return rc;
- }
-
- in_module_init = 0;
-
- return 0;
-}
-
-static void __exit pata_rdc_exit(void)
-{
- dbgprintf("pata_rdc_exit\n");
- pci_unregister_driver(&rdc_pata_driver);
-}
-
-module_init(pata_rdc_init);
-module_exit(pata_rdc_exit);
/* ata device data */
@@ -89,620 +48,238 @@ static struct pci_bits ATA_Decode_Enable_Bits[] = {
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port (Channel) 1 */
};
-/* pata host template */
-static struct scsi_host_template rdc_pata_sht = {
- ATA_BMDMA_SHT(DRIVER_NAME),
-};
-
-static const struct ata_port_operations rdc_pata_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .port_start = rdc_pata_port_start,
- .port_stop = rdc_pata_port_stop,
- .prereset = rdc_pata_prereset,
- .cable_detect = rdc_pata_cable_detect,
- .set_piomode = rdc_pata_set_piomode,
- .set_dmamode = rdc_pata_set_dmamode,
-};
-
-static struct ata_port_info rdc_pata_port_info[] = {
- [RDC_17F31011] = {
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA5, /* udma0-5 */
- .port_ops = &rdc_pata_ops,
- },
-
- [RDC_17F31012] = {
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA5, /* udma0-5 */
- .port_ops = &rdc_pata_ops,
- },
-};
-
-
-
-
-/* callback function for pci_driver */
-
-/**
- * Register ATA PCI device with kernel services
- * @pdev: PCI device to register
- * @ent: Entry in sch_pci_tbl matching with @pdev
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, or -ERRNO value.
- */
-static int __devinit rdc_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static uint PCIDeviceIO_ReadPCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
{
- /*struct device *dev = &pdev->dev; */
- struct ata_port_info port_info[2];
- const struct ata_port_info *ppinfo[] = { &port_info[0], &port_info[1] };
+ uint funcresult;
+ unchar *pchar;
+ uint i;
- int rc;
+ funcresult = TRUE;
- dbgprintf("rdc_init_one\n");
+ pchar = pBuffer;
- /* no hotplugging support (FIXME) */ /* why??? */
- if (!in_module_init) {
- dbgprintf("rdc_init_one in_module_init == 0 failed \n");
- return -ENODEV;
+ for (i = 0; i < Length; i++) {
+ pci_read_config_byte(pdev, Offset, pchar);
+ Offset++;
+ pchar++;
}
- port_info[0] = rdc_pata_port_info[ent->driver_data];
- port_info[1] = rdc_pata_port_info[ent->driver_data];
- /* enable device and prepare host */
- rc = pci_enable_device(pdev);
- if (rc) {
- dbgprintf("rdc_init_one pci_enable_device failed \n");
- return rc;
- }
- /* initialize controller */
+ funcresult = TRUE;
- pci_intx(pdev, 1); /* enable interrupt */
+ goto funcexit;
+funcexit:
- return ata_pci_sff_init_one(pdev, ppinfo, &rdc_pata_sht, NULL);
+ return funcresult;
}
-/* callback function for ata_port */
-
-/**
- * Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
+static uint PCIDeviceIO_WritePCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
+{
+ uint funcresult;
+ unchar *pchar;
+ uint i;
- Some drivers also use this entry point as a chance to allocate driverprivate
- memory for ap->private_data.
+ funcresult = TRUE;
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static int rdc_pata_port_start(struct ata_port *ap)
-{
- uint Channel;
+ pchar = pBuffer;
- Channel = ap->port_no;
- dbgprintf("rdc_pata_port_start Channel: %u \n", Channel);
- if (ap->ioaddr.bmdma_addr) {
- return ata_port_start(ap);
- } else {
- dbgprintf("rdc_pata_port_start return 0 !!!\n");
- return 0;
+ for (i = 0; i < Length; i++) {
+ pci_write_config_byte(pdev, Offset, *pchar);
+ Offset++;
+ pchar++;
}
-}
-static void rdc_pata_port_stop(struct ata_port *ap)
-{
- uint Channel;
+ funcresult = TRUE;
- Channel = ap->port_no;
+ goto funcexit;
+funcexit:
- dbgprintf("rdc_pata_port_stop Channel: %u \n", Channel);
+ return funcresult;
}
-/**
- * prereset for PATA host controller
- * @link: Target link
- * @deadline: deadline jiffies for the operation
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+static uint ATAHostAdapter_SetPrimaryPIO(struct pci_dev *pdev, uint DeviceID,
+ uint PIOTimingMode, uint DMAEnable,
+ uint PrefetchPostingEnable)
{
- struct pci_dev *pdev;
- struct ata_port *ap;
- uint Channel;
+ uint funcresult;
+ uint result;
+ uint ATATimingRegister;
+ uint Device1TimingRegister;
- dbgprintf("rdc_pata_prereset\n");
+ funcresult = TRUE;
- ap = link->ap;
- pdev = to_pci_dev(ap->host->dev);
+ ATATimingRegister = 0;
+ Device1TimingRegister = 0;
- Channel = ap->port_no;
+ result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+ ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_PrimaryTiming_Size,
+ &ATATimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
+ }
- /* test ATA Decode Enable Bits, should be enable. */
- if (!pci_test_config_bits(pdev, &ATA_Decode_Enable_Bits[Channel])) {
- dbgprintf("rdc_pata_prereset Channel: %u, Decode Disable\n", Channel);
- return -ENOENT;
- } else {
- dbgprintf("rdc_pata_prereset Channel: %u, Decode Enable\n", Channel);
- return ata_std_prereset(link, deadline);
+ result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+ ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_Device1Timing_Size,
+ &Device1TimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
}
-}
-/**
- * Probe host controller cable detect info
- * @ap: Port for which cable detect info is desired
- *
- * Read cable indicator from ATA PCI device's PCI config
- * register. This register is normally set by firmware (BIOS).
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static int rdc_pata_cable_detect(struct ata_port *ap)
-{
- struct pci_dev *pdev;
- uint Channel;
- uint Mask;
- u32 u32Value;
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
- dbgprintf("rdc_pata_cable_detect\n");
+ switch (DeviceID) {
+ case 0:
+ /* mask clear */
+ ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
+ ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
+ ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
+ ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
+ ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
+ ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
- pdev = to_pci_dev(ap->host->dev);
+ if (PIOTimingMode > PIO0)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
- Channel = ap->port_no;
+ if (PIOTimingMode >= PIO3)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
- if (Channel == 0)
- Mask = ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report;
- else
- Mask = ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report;
+ if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
- /* check BIOS cable detect results */
- pci_read_config_dword(pdev, ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset, &u32Value);
+ if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
- if ((u32Value & Mask) == 0) {
- dbgprintf("rdc_pata_cable_detect Channel: %u, PATA40 \n", Channel);
- return ATA_CBL_PATA40;
- } else {
- dbgprintf("rdc_pata_cable_detect Channel: %u, PATA80 \n", Channel);
- return ATA_CBL_PATA80;
- }
-}
+ if (PIOTimingMode <= PIO2)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
+ else if (PIOTimingMode == PIO3)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
+ else if (PIOTimingMode == PIO4)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
-/**
- * Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static void rdc_pata_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct pci_dev *pdev;
- uint Channel;
- uint DeviceID;
- uint PIOTimingMode;
- uint PrefetchPostingEnable;
+ if (PIOTimingMode <= PIO1)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
+ else if (PIOTimingMode == PIO2)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
+ else if (PIOTimingMode <= PIO4)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
+ break;
+ case 1:
+ ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
+ ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
+ ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
+ ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
- dbgprintf("rdc_pata_set_piomode\n");
+ if (PIOTimingMode > PIO0)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
- pdev = to_pci_dev(ap->host->dev);
+ if (PIOTimingMode >= PIO3)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
- Channel = ap->port_no;
- DeviceID = adev->devno;
- /*
- * piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1,
- * XFER_PIO_2, XFER_PIO_3...
- */
- PIOTimingMode = adev->pio_mode - XFER_PIO_0;
+ if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
- if (adev->class == ATA_DEV_ATA) {
- PrefetchPostingEnable = TRUE;
- } else {
- /* ATAPI, CD DVD Rom */
- PrefetchPostingEnable = FALSE;
- }
+ if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
- /* PIO configuration clears DTE unconditionally. It will be
- * programmed in set_dmamode which is guaranteed to be called
- * after set_piomode if any DMA mode is available.
- */
+ Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_PrimaryRecoveryMode |
+ ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode);
- /* Ensure the UDMA bit is off - it will be turned back on if UDMA is
- * selected */
+ if (PIOTimingMode <= PIO2)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0;
+ else if (PIOTimingMode == PIO3)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1;
+ else if (PIOTimingMode == PIO4)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3;
- if (Channel == 0) {
- ATAHostAdapter_SetPrimaryPIO(
- pdev,
- DeviceID,
- PIOTimingMode,
- TRUE,/* DMAEnable, */
- PrefetchPostingEnable
- );
+ if (PIOTimingMode <= PIO1)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0;
+ else if (PIOTimingMode == PIO2)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1;
+ else if (PIOTimingMode <= PIO4)
+ Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2;
+ break;
+ default:
+ funcresult = FALSE;
+ goto funcexit;
+ break;
+ }
- ATAHostAdapter_SetPrimaryUDMA(
- pdev,
- DeviceID,
- FALSE,/* UDMAEnable, */
- UDMA0
- );
- } else {
- ATAHostAdapter_SetSecondaryPIO(
- pdev,
- DeviceID,
- PIOTimingMode,
- TRUE,/* DMAEnable, */
- PrefetchPostingEnable
- );
+ result = PCIDeviceIO_WritePCIConfiguration(pdev,
+ ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_PrimaryTiming_Size,
+ &ATATimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
+ }
- ATAHostAdapter_SetSecondaryUDMA(
- pdev,
- DeviceID,
- FALSE,/* UDMAEnable, */
- UDMA0
- );
+ result = PCIDeviceIO_WritePCIConfiguration(pdev,
+ ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_Device1Timing_Size,
+ &Device1TimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
}
- dbgprintf("rdc_pata_set_piomode Channel: %u, DeviceID: %u, PIO: %d \n", Channel, DeviceID, PIOTimingMode);
+
+ goto funcexit;
+funcexit:
+
+ return funcresult;
}
-/**
- * Initialize host controller PATA DMA timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set MW/UDMA mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static void rdc_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+static uint ATAHostAdapter_SetSecondaryPIO(struct pci_dev *pdev, uint DeviceID,
+ uint PIOTimingMode, uint DMAEnable,
+ uint PrefetchPostingEnable)
{
- struct pci_dev *pdev;
- uint Channel;
- uint DeviceID;
- uint PIOTimingMode;
- uint PrefetchPostingEnable;
- uint DMATimingMode;
- uint UDMAEnable;
-
- dbgprintf("rdc_pata_set_dmamode\n");
+ uint funcresult;
+ uint result;
+ uint ATATimingRegister;
+ uint Device1TimingRegister;
- pdev = to_pci_dev(ap->host->dev);
+ funcresult = TRUE;
- Channel = ap->port_no;
- DeviceID = adev->devno;
- PIOTimingMode = adev->pio_mode - XFER_PIO_0; /* piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3... */
- DMATimingMode = adev->dma_mode; /* UDMA or MDMA */
+ ATATimingRegister = 0;
+ Device1TimingRegister = 0;
- if (adev->class == ATA_DEV_ATA) {
- PrefetchPostingEnable = TRUE;
- } else {
- /* ATAPI, CD DVD Rom */
- PrefetchPostingEnable = FALSE;
+ result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+ ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_SecondaryTiming_Size,
+ &ATATimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
}
- if (ap->udma_mask == 0) {
- /* ata_port dont support udma. depend on hardware spec. */
- UDMAEnable = FALSE;
- } else {
- UDMAEnable = TRUE;
+ result = PCIDeviceIO_ReadPCIConfiguration(pdev,
+ ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
+ ATAConfiguration_ID_Device1Timing_Size,
+ &Device1TimingRegister);
+ if (result == FALSE) {
+ funcresult = FALSE;
+ goto funcexit;
}
- /*if (ap->mdma_mask == 0) {
- }*/
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
- if (Channel == 0) {
- if (DMATimingMode >= XFER_UDMA_0) {
- /* UDMA */
- ATAHostAdapter_SetPrimaryPIO(pdev,
- DeviceID,
- PIOTimingMode,
- TRUE,/*DMAEnable,*/
- PrefetchPostingEnable);
+ switch (DeviceID) {
+ case 0:
+ /* mask clear */
+ ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
+ ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
+ ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
+ ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
+ ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
+ ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
- ATAHostAdapter_SetPrimaryUDMA(pdev,
- DeviceID,
- UDMAEnable,
- DMATimingMode - XFER_UDMA_0);
- dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, UDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_UDMA_0));
- } else {
- /* MDMA */
- ATAHostAdapter_SetPrimaryPIO(pdev,
- DeviceID,
- (DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
- TRUE,/*DMAEnable,*/
- PrefetchPostingEnable);
+ if (PIOTimingMode > PIO0)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
- ATAHostAdapter_SetPrimaryUDMA(pdev,
- DeviceID,
- FALSE,/*UDMAEnable,*/
- UDMA0);
- dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, MDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_MW_DMA_0));
- }
- } else {
- if (DMATimingMode >= XFER_UDMA_0) {
- /* UDMA */
- ATAHostAdapter_SetSecondaryPIO(pdev,
- DeviceID,
- PIOTimingMode,
- TRUE,/*DMAEnable,*/
- PrefetchPostingEnable);
-
- ATAHostAdapter_SetSecondaryUDMA(pdev,
- DeviceID,
- UDMAEnable,
- DMATimingMode - XFER_UDMA_0);
- dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, UDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_UDMA_0));
- } else {
- /* MDMA */
- ATAHostAdapter_SetSecondaryPIO(pdev,
- DeviceID,
- (DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
- TRUE,/*DMAEnable,*/
- PrefetchPostingEnable);
-
- ATAHostAdapter_SetSecondaryUDMA(pdev,
- DeviceID,
- FALSE,/*UDMAEnable,*/
- UDMA0);
- dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, MDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_MW_DMA_0));
- }
- }
-}
-
-/* modified PCIDeviceIO code. */
-
-static uint PCIDeviceIO_ReadPCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
-{
- uint funcresult;
- unchar *pchar;
- uint i;
-
- funcresult = TRUE;
-
- pchar = pBuffer;
-
- for (i = 0; i < Length; i++) {
- pci_read_config_byte(pdev, Offset, pchar);
- Offset++;
- pchar++;
- }
-
- funcresult = TRUE;
-
- goto funcexit;
-funcexit:
-
- return funcresult;
-}
-
-static uint PCIDeviceIO_WritePCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer)
-{
- uint funcresult;
- unchar *pchar;
- uint i;
-
- funcresult = TRUE;
-
- pchar = pBuffer;
-
- for (i = 0; i < Length; i++) {
- pci_write_config_byte(pdev, Offset, *pchar);
- Offset++;
- pchar++;
- }
-
- funcresult = TRUE;
-
- goto funcexit;
-funcexit:
-
- return funcresult;
-}
-
-/* modified ATAHostAdapter code. */
-static uint ATAHostAdapter_SetPrimaryPIO(struct pci_dev *pdev, uint DeviceID,
- uint PIOTimingMode, uint DMAEnable,
- uint PrefetchPostingEnable)
-{
- uint funcresult;
- uint result;
- uint ATATimingRegister;
- uint Device1TimingRegister;
-
- funcresult = TRUE;
-
- ATATimingRegister = 0;
- Device1TimingRegister = 0;
-
- result = PCIDeviceIO_ReadPCIConfiguration(pdev,
- ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_PrimaryTiming_Size,
- &ATATimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- result = PCIDeviceIO_ReadPCIConfiguration(pdev,
- ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_Device1Timing_Size,
- &Device1TimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
-
- switch (DeviceID) {
- case 0:
- /* mask clear */
- ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
- ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
- ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
- ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
- ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
- ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
-
- if (PIOTimingMode > PIO0)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
-
- if (PIOTimingMode >= PIO3)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
-
- if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
-
- if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0DMATimingEnable;
-
- if (PIOTimingMode <= PIO2)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_0;
- else if (PIOTimingMode == PIO3)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_1;
- else if (PIOTimingMode == PIO4)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0RecoveryMode_3;
-
- if (PIOTimingMode <= PIO1)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_0;
- else if (PIOTimingMode == PIO2)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_1;
- else if (PIOTimingMode <= PIO4)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode_2;
- break;
- case 1:
- ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device1FastTimingEnable |
- ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable |
- ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable |
- ATAConfiguration_PrimaryTiming_Device1DMATimingEnable);
-
- if (PIOTimingMode > PIO0)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1FastTimingEnable;
-
- if (PIOTimingMode >= PIO3)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1IORDYSampleModeEnable;
-
- if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1PrefetchandPostingEnable;
-
- if (DMAEnable == TRUE && PIOTimingMode >= PIO2)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1DMATimingEnable;
-
- Device1TimingRegister &= ~(ATAConfiguration_Device1Timing_PrimaryRecoveryMode |
- ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode);
-
- if (PIOTimingMode <= PIO2)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_0;
- else if (PIOTimingMode == PIO3)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_1;
- else if (PIOTimingMode == PIO4)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryRecoveryMode_3;
-
- if (PIOTimingMode <= PIO1)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_0;
- else if (PIOTimingMode == PIO2)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_1;
- else if (PIOTimingMode <= PIO4)
- Device1TimingRegister |= ATAConfiguration_Device1Timing_PrimaryIORDYSampleMode_2;
- break;
- default:
- funcresult = FALSE;
- goto funcexit;
- break;
- }
-
- result = PCIDeviceIO_WritePCIConfiguration(pdev,
- ATAConfiguration_ID_PrimaryTiming + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_PrimaryTiming_Size,
- &ATATimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- result = PCIDeviceIO_WritePCIConfiguration(pdev,
- ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_Device1Timing_Size,
- &Device1TimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- goto funcexit;
-funcexit:
-
- return funcresult;
-}
-
-static uint ATAHostAdapter_SetSecondaryPIO(struct pci_dev *pdev, uint DeviceID,
- uint PIOTimingMode, uint DMAEnable,
- uint PrefetchPostingEnable)
-{
- uint funcresult;
- uint result;
- uint ATATimingRegister;
- uint Device1TimingRegister;
-
- funcresult = TRUE;
-
- ATATimingRegister = 0;
- Device1TimingRegister = 0;
-
- result = PCIDeviceIO_ReadPCIConfiguration(pdev,
- ATAConfiguration_ID_SecondaryTiming + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_SecondaryTiming_Size,
- &ATATimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- result = PCIDeviceIO_ReadPCIConfiguration(pdev,
- ATAConfiguration_ID_Device1Timing + ATAConfiguration_PCIOffset,
- ATAConfiguration_ID_Device1Timing_Size,
- &Device1TimingRegister);
- if (result == FALSE) {
- funcresult = FALSE;
- goto funcexit;
- }
-
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device1TimingRegisterEnable;
-
- switch (DeviceID) {
- case 0:
- /* mask clear */
- ATATimingRegister &= ~(ATAConfiguration_PrimaryTiming_Device0FastTimingEnable |
- ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable |
- ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable |
- ATAConfiguration_PrimaryTiming_Device0DMATimingEnable |
- ATAConfiguration_PrimaryTiming_Device0RecoveryMode |
- ATAConfiguration_PrimaryTiming_Device0IORDYSampleMode);
-
- if (PIOTimingMode > PIO0)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0FastTimingEnable;
-
- if (PIOTimingMode >= PIO3)
- ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
+ if (PIOTimingMode >= PIO3)
+ ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0IORDYSampleModeEnable;
if (PIOTimingMode >= PIO2 && PrefetchPostingEnable == TRUE)
ATATimingRegister |= ATAConfiguration_PrimaryTiming_Device0PrefetchandPostingEnable;
@@ -1064,3 +641,405 @@ static uint ATAHostAdapter_SetSecondaryUDMA(struct pci_dev *pdev, uint DeviceID,
funcexit:
return funcresult;
}
+
+/**
+ * Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+
+ Some drivers also use this entry point as a chance to allocate driverprivate
+ memory for ap->private_data.
+
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int rdc_pata_port_start(struct ata_port *ap)
+{
+ uint Channel;
+
+ Channel = ap->port_no;
+ dbgprintf("rdc_pata_port_start Channel: %u \n", Channel);
+ if (ap->ioaddr.bmdma_addr) {
+ return ata_port_start(ap);
+ } else {
+ dbgprintf("rdc_pata_port_start return 0 !!!\n");
+ return 0;
+ }
+}
+
+static void rdc_pata_port_stop(struct ata_port *ap)
+{
+ uint Channel;
+
+ Channel = ap->port_no;
+
+ dbgprintf("rdc_pata_port_stop Channel: %u \n", Channel);
+}
+
+/**
+ * prereset for PATA host controller
+ * @link: Target link
+ * @deadline: deadline jiffies for the operation
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+{
+ struct pci_dev *pdev;
+ struct ata_port *ap;
+ uint Channel;
+
+ dbgprintf("rdc_pata_prereset\n");
+
+ ap = link->ap;
+ pdev = to_pci_dev(ap->host->dev);
+
+ Channel = ap->port_no;
+
+ /* test ATA Decode Enable Bits, should be enable. */
+ if (!pci_test_config_bits(pdev, &ATA_Decode_Enable_Bits[Channel])) {
+ dbgprintf("rdc_pata_prereset Channel: %u, Decode Disable\n", Channel);
+ return -ENOENT;
+ } else {
+ dbgprintf("rdc_pata_prereset Channel: %u, Decode Enable\n", Channel);
+ return ata_std_prereset(link, deadline);
+ }
+}
+
+/**
+ * Probe host controller cable detect info
+ * @ap: Port for which cable detect info is desired
+ *
+ * Read cable indicator from ATA PCI device's PCI config
+ * register. This register is normally set by firmware (BIOS).
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int rdc_pata_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev;
+ uint Channel;
+ uint Mask;
+ u32 u32Value;
+
+ dbgprintf("rdc_pata_cable_detect\n");
+
+ pdev = to_pci_dev(ap->host->dev);
+
+ Channel = ap->port_no;
+
+ if (Channel == 0)
+ Mask = ATAConfiguration_IDEIOConfiguration_PrimaryDeviceCable80Report;
+ else
+ Mask = ATAConfiguration_IDEIOConfiguration_SecondaryDeviceCable80Report;
+
+ /* check BIOS cable detect results */
+ pci_read_config_dword(pdev, ATAConfiguration_ID_IDEIOConfiguration + ATAConfiguration_PCIOffset, &u32Value);
+
+ if ((u32Value & Mask) == 0) {
+ dbgprintf("rdc_pata_cable_detect Channel: %u, PATA40 \n", Channel);
+ return ATA_CBL_PATA40;
+ } else {
+ dbgprintf("rdc_pata_cable_detect Channel: %u, PATA80 \n", Channel);
+ return ATA_CBL_PATA80;
+ }
+}
+
+/**
+ * Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static void rdc_pata_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev;
+ uint Channel;
+ uint DeviceID;
+ uint PIOTimingMode;
+ uint PrefetchPostingEnable;
+
+ dbgprintf("rdc_pata_set_piomode\n");
+
+ pdev = to_pci_dev(ap->host->dev);
+
+ Channel = ap->port_no;
+ DeviceID = adev->devno;
+ /*
+ * piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1,
+ * XFER_PIO_2, XFER_PIO_3...
+ */
+ PIOTimingMode = adev->pio_mode - XFER_PIO_0;
+
+ if (adev->class == ATA_DEV_ATA) {
+ PrefetchPostingEnable = TRUE;
+ } else {
+ /* ATAPI, CD DVD Rom */
+ PrefetchPostingEnable = FALSE;
+ }
+
+ /* PIO configuration clears DTE unconditionally. It will be
+ * programmed in set_dmamode which is guaranteed to be called
+ * after set_piomode if any DMA mode is available.
+ */
+
+ /* Ensure the UDMA bit is off - it will be turned back on if UDMA is
+ * selected */
+
+ if (Channel == 0) {
+ ATAHostAdapter_SetPrimaryPIO(
+ pdev,
+ DeviceID,
+ PIOTimingMode,
+ TRUE,/* DMAEnable, */
+ PrefetchPostingEnable
+ );
+
+ ATAHostAdapter_SetPrimaryUDMA(
+ pdev,
+ DeviceID,
+ FALSE,/* UDMAEnable, */
+ UDMA0
+ );
+ } else {
+ ATAHostAdapter_SetSecondaryPIO(
+ pdev,
+ DeviceID,
+ PIOTimingMode,
+ TRUE,/* DMAEnable, */
+ PrefetchPostingEnable
+ );
+
+ ATAHostAdapter_SetSecondaryUDMA(
+ pdev,
+ DeviceID,
+ FALSE,/* UDMAEnable, */
+ UDMA0
+ );
+ }
+ dbgprintf("rdc_pata_set_piomode Channel: %u, DeviceID: %u, PIO: %d \n", Channel, DeviceID, PIOTimingMode);
+}
+
+/**
+ * Initialize host controller PATA DMA timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set MW/UDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static void rdc_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev;
+ uint Channel;
+ uint DeviceID;
+ uint PIOTimingMode;
+ uint PrefetchPostingEnable;
+ uint DMATimingMode;
+ uint UDMAEnable;
+
+ dbgprintf("rdc_pata_set_dmamode\n");
+
+ pdev = to_pci_dev(ap->host->dev);
+
+ Channel = ap->port_no;
+ DeviceID = adev->devno;
+ PIOTimingMode = adev->pio_mode - XFER_PIO_0; /* piomode = 0, 1, 2, 3... ; adev->pio_mode = XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3... */
+ DMATimingMode = adev->dma_mode; /* UDMA or MDMA */
+
+ if (adev->class == ATA_DEV_ATA) {
+ PrefetchPostingEnable = TRUE;
+ } else {
+ /* ATAPI, CD DVD Rom */
+ PrefetchPostingEnable = FALSE;
+ }
+
+ if (ap->udma_mask == 0) {
+ /* ata_port dont support udma. depend on hardware spec. */
+ UDMAEnable = FALSE;
+ } else {
+ UDMAEnable = TRUE;
+ }
+
+ /*if (ap->mdma_mask == 0) {
+ }*/
+
+ if (Channel == 0) {
+ if (DMATimingMode >= XFER_UDMA_0) {
+ /* UDMA */
+ ATAHostAdapter_SetPrimaryPIO(pdev,
+ DeviceID,
+ PIOTimingMode,
+ TRUE,/*DMAEnable,*/
+ PrefetchPostingEnable);
+
+ ATAHostAdapter_SetPrimaryUDMA(pdev,
+ DeviceID,
+ UDMAEnable,
+ DMATimingMode - XFER_UDMA_0);
+ dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, UDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_UDMA_0));
+ } else {
+ /* MDMA */
+ ATAHostAdapter_SetPrimaryPIO(pdev,
+ DeviceID,
+ (DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
+ TRUE,/*DMAEnable,*/
+ PrefetchPostingEnable);
+
+ ATAHostAdapter_SetPrimaryUDMA(pdev,
+ DeviceID,
+ FALSE,/*UDMAEnable,*/
+ UDMA0);
+ dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, MDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_MW_DMA_0));
+ }
+ } else {
+ if (DMATimingMode >= XFER_UDMA_0) {
+ /* UDMA */
+ ATAHostAdapter_SetSecondaryPIO(pdev,
+ DeviceID,
+ PIOTimingMode,
+ TRUE,/*DMAEnable,*/
+ PrefetchPostingEnable);
+
+ ATAHostAdapter_SetSecondaryUDMA(pdev,
+ DeviceID,
+ UDMAEnable,
+ DMATimingMode - XFER_UDMA_0);
+ dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, UDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_UDMA_0));
+ } else {
+ /* MDMA */
+ ATAHostAdapter_SetSecondaryPIO(pdev,
+ DeviceID,
+ (DMATimingMode - XFER_MW_DMA_0) + PIO2, /* MDMA0 = PIO2 */
+ TRUE,/*DMAEnable,*/
+ PrefetchPostingEnable);
+
+ ATAHostAdapter_SetSecondaryUDMA(pdev,
+ DeviceID,
+ FALSE,/*UDMAEnable,*/
+ UDMA0);
+ dbgprintf("rdc_pata_set_dmamode Channel: %u, DeviceID: %u, MDMA: %u \n", Channel, DeviceID, (uint)(DMATimingMode - XFER_MW_DMA_0));
+ }
+ }
+}
+
+/* pata host template */
+static struct scsi_host_template rdc_pata_sht = {
+ ATA_BMDMA_SHT(DRIVER_NAME),
+};
+
+static const struct ata_port_operations rdc_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .port_start = rdc_pata_port_start,
+ .port_stop = rdc_pata_port_stop,
+ .prereset = rdc_pata_prereset,
+ .cable_detect = rdc_pata_cable_detect,
+ .set_piomode = rdc_pata_set_piomode,
+ .set_dmamode = rdc_pata_set_dmamode,
+};
+
+static struct ata_port_info rdc_pata_port_info[] = {
+ [RDC_17F31011] = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA5, /* udma0-5 */
+ .port_ops = &rdc_pata_ops,
+ },
+
+ [RDC_17F31012] = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA5, /* udma0-5 */
+ .port_ops = &rdc_pata_ops,
+ },
+};
+
+static int __devinit rdc_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ /*struct device *dev = &pdev->dev; */
+ struct ata_port_info port_info[2];
+ const struct ata_port_info *ppinfo[] = { &port_info[0], &port_info[1] };
+
+ int rc;
+
+ dbgprintf("rdc_init_one\n");
+
+ /* no hotplugging support (FIXME) */ /* why??? */
+ if (!in_module_init) {
+ dbgprintf("rdc_init_one in_module_init == 0 failed \n");
+ return -ENODEV;
+ }
+ port_info[0] = rdc_pata_port_info[ent->driver_data];
+ port_info[1] = rdc_pata_port_info[ent->driver_data];
+
+ /* enable device and prepare host */
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dbgprintf("rdc_init_one pci_enable_device failed \n");
+ return rc;
+ }
+ /* initialize controller */
+
+ pci_intx(pdev, 1); /* enable interrupt */
+
+ return ata_pci_sff_init_one(pdev, ppinfo, &rdc_pata_sht, NULL);
+}
+
+/* a pci driver */
+static struct pci_driver rdc_pata_driver = {
+ .name = DRIVER_NAME,
+ .id_table = rdc_pata_id_table,
+ .probe = rdc_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+static int __init pata_rdc_init(void)
+{
+ int rc;
+
+ dbgprintf("pata_rdc_init\n");
+ rc = pci_register_driver(&rdc_pata_driver);
+ if (rc) {
+ dbgprintf("pata_rdc_init faile\n");
+ return rc;
+ }
+
+ in_module_init = 0;
+
+ return 0;
+}
+
+static void __exit pata_rdc_exit(void)
+{
+ dbgprintf("pata_rdc_exit\n");
+ pci_unregister_driver(&rdc_pata_driver);
+}
+
+module_init(pata_rdc_init);
+module_exit(pata_rdc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RDC PCI IDE Driver");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/staging/pata_rdc/pata_rdc.h b/drivers/staging/pata_rdc/pata_rdc.h
index 64adca0c53b8..a833339886d9 100644
--- a/drivers/staging/pata_rdc/pata_rdc.h
+++ b/drivers/staging/pata_rdc/pata_rdc.h
@@ -141,34 +141,4 @@ enum rdc_controller_ids {
RDC_17F31012
};
-/* callback function for driver */
-static int rdc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-
-/* callback function for ata_port */
-static int rdc_pata_port_start(struct ata_port *ap);
-
-static void rdc_pata_port_stop(struct ata_port *ap);
-
-static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline);
-
-static int rdc_pata_cable_detect(struct ata_port *ap);
-
-static void rdc_pata_set_piomode(struct ata_port *ap, struct ata_device *adev);
-
-static void rdc_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-
-/* modified PCIDeviceIO code. */
-static uint PCIDeviceIO_ReadPCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer);
-
-static uint PCIDeviceIO_WritePCIConfiguration(struct pci_dev *pdev, uint Offset, uint Length, void *pBuffer);
-
-/* modify ATAHostAdapter code */
-static uint ATAHostAdapter_SetPrimaryPIO(struct pci_dev *pdev, uint DeviceID, uint PIOTimingMode, uint DMAEnable, uint PrefetchPostingEnable);
-
-static uint ATAHostAdapter_SetSecondaryPIO(struct pci_dev *pdev, uint DeviceID, uint PIOTimingMode, uint DMAEnable, uint PrefetchPostingEnable);
-
-static uint ATAHostAdapter_SetPrimaryUDMA(struct pci_dev *pdev, uint DeviceID, uint UDMAEnable, uint UDMATimingMode);
-
-static uint ATAHostAdapter_SetSecondaryUDMA(struct pci_dev *pdev, uint DeviceID, uint UDMAEnable, uint UDMATimingMode);
-
#endif
--
2.20.1