From c074fc4c2990d48acab78d304054a6ff212f3d53 Mon Sep 17 00:00:00 2001 From: Frank Schaefer Date: Mon, 3 Jun 2013 14:12:03 -0300 Subject: [PATCH] [media] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit - add definition for GPIO register 0x09 (reading/input) - extend the information the chip variants that support GPIO registers 0x08/0x09 - rename EM28XX_R08_GPIO to EM2820_R08_GPIO_CTRL Signed-off-by: Frank Schäfer Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/em28xx/em28xx-cards.c | 128 ++++++++++++------------ drivers/media/usb/em28xx/em28xx-dvb.c | 6 +- drivers/media/usb/em28xx/em28xx-reg.h | 5 +- 3 files changed, 70 insertions(+), 69 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index c0b853541f09..6ee4bed730dd 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -82,26 +82,26 @@ static void em28xx_pre_card_setup(struct em28xx *dev); /* Reset for the most [analog] boards */ static struct em28xx_reg_seq default_analog[] = { - {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Reset for the most [digital] boards */ static struct em28xx_reg_seq default_digital[] = { - {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 analog */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { - {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, {0x05, 0xff, 0x10, 10}, { -1, -1, -1, -1}, }; /* Board Hauppauge WinTV HVR 900 digital */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { - {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0x0f, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, @@ -109,14 +109,14 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { /* Board Hauppauge WinTV HVR 900 (R2) digital */ static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { - {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x0c, 0x0f, 10}, { -1, -1, -1, -1}, }; /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { - {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; @@ -127,11 +127,11 @@ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { /* Board - EM2882 Kworld 315U digital */ static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 10}, - {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, { -1, -1, -1, -1}, }; @@ -144,13 +144,13 @@ static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { }; static struct em28xx_reg_seq kworld_330u_analog[] = { - {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq kworld_330u_digital[] = { - {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; @@ -162,12 +162,12 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { GOP3 - s5h1409 reset */ static struct em28xx_reg_seq evga_indtube_analog[] = { - {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq evga_indtube_digital[] = { - {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, {EM2880_R04_GPO, 0x04, 0xff, 10}, {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, @@ -185,31 +185,31 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { * EM_GPIO_7 - currently unknown */ static struct em28xx_reg_seq kworld_a340_digital[] = { - {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Pinnacle Hybrid Pro eb1a:2881 */ static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { - {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { - {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ {EM2880_R04_GPO, 0x0c, 0xff, 1}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { - {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { - {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; @@ -218,66 +218,66 @@ static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { GPIO4 - CU1216L NIM Other GPIOs seems to be don't care. */ static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { - {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, - {EM28XX_R08_GPIO, 0xde, 0xff, 10}, - {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM28XX_R08_GPIO, 0x7f, 0xff, 10}, - {EM28XX_R08_GPIO, 0x6f, 0xff, 10}, - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {-1, -1, -1, -1}, }; /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { - {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, - {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10}, - {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, { -1, -1, -1, -1}, }; /* Mute/unmute */ static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { - {EM28XX_R08_GPIO, 5, 7, 10}, + {EM2820_R08_GPIO_CTRL, 5, 7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { - {EM28XX_R08_GPIO, 4, 7, 10}, + {EM2820_R08_GPIO_CTRL, 4, 7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq compro_mute_gpio[] = { - {EM28XX_R08_GPIO, 6, 7, 10}, + {EM2820_R08_GPIO_CTRL, 6, 7, 10}, { -1, -1, -1, -1}, }; /* Terratec AV350 */ static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { - {EM28XX_R08_GPIO, 0xff, 0x7f, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq silvercrest_reg_seq[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, - {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq vc211a_enable[] = { - {EM28XX_R08_GPIO, 0xff, 0x07, 10}, - {EM28XX_R08_GPIO, 0xff, 0x0f, 10}, - {EM28XX_R08_GPIO, 0xff, 0x0b, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, { -1, -1, -1, -1}, }; static struct em28xx_reg_seq dikom_dk300_digital[] = { - {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x08, 0xff, 10}, { -1, -1, -1, -1}, }; @@ -309,7 +309,7 @@ static struct em28xx_reg_seq pctv_290e[] = { #if 0 static struct em28xx_reg_seq terratec_h5_gpio[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, @@ -2299,9 +2299,9 @@ static void em28xx_pre_card_setup(struct em28xx *dev) break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); msleep(10); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); msleep(10); break; case EM2870_BOARD_COMPRO_VIDEOMATE: @@ -2311,45 +2311,45 @@ static void em28xx_pre_card_setup(struct em28xx *dev) msleep(10); em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); msleep(10); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); mdelay(70); break; case EM2870_BOARD_TERRATEC_XS_MT2060: /* this device needs some gpio writes to get the DVB-T demod work */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); break; case EM2870_BOARD_PINNACLE_PCTV_DVB: /* this device needs some gpio writes to get the DVB-T demod work */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); mdelay(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); mdelay(70); break; case EM2820_BOARD_GADMEI_UTV310: case EM2820_BOARD_MSI_VOX_USB_2: /* enables audio for that devices */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); break; case EM2882_BOARD_KWORLD_ATSC_315U: - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); msleep(10); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(10); em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); msleep(10); @@ -2375,13 +2375,13 @@ static void em28xx_pre_card_setup(struct em28xx *dev) break; case EM2820_BOARD_IODATA_GVMVP_SZ: - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); msleep(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); msleep(10); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); msleep(70); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(70); break; } @@ -2677,12 +2677,12 @@ static void em28xx_card_setup(struct em28xx *dev) case EM2882_BOARD_KWORLD_ATSC_315U: em28xx_write_reg(dev, 0x0d, 0x42); msleep(10); - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); msleep(10); break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); + em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: @@ -2898,7 +2898,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, /* Set the default GPO/GPIO for legacy devices */ dev->reg_gpo_num = EM2880_R04_GPO; - dev->reg_gpio_num = EM28XX_R08_GPIO; + dev->reg_gpio_num = EM2820_R08_GPIO_CTRL; dev->wait_after_write = 5; @@ -3086,7 +3086,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, if (dev->board.has_msp34xx) { /* Send a reset to other chips via gpio */ - retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7); + retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg - " "msp34xx(1) failed! error [%d]\n", @@ -3095,7 +3095,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, } msleep(3); - retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); if (retval < 0) { em28xx_errdev("%s: em28xx_write_reg - " "msp34xx(2) failed! error [%d]\n", diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 69aed825f583..bb1e8dca80cd 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -487,7 +487,7 @@ static void terratec_h5_init(struct em28xx *dev) { int i; struct em28xx_reg_seq terratec_h5_init[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, @@ -543,7 +543,7 @@ static void terratec_htc_stick_init(struct em28xx *dev) * 0xb6: unknown (does not affect DVB-T). */ struct em28xx_reg_seq terratec_htc_stick_init[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, @@ -590,7 +590,7 @@ static void terratec_htc_usb_xs_init(struct em28xx *dev) int i; struct em28xx_reg_seq terratec_htc_usb_xs_init[] = { - {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 100}, {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 50}, {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100}, diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index 0233c5bedc55..af39ddbe01e0 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -49,8 +49,9 @@ /* GPIO/GPO registers */ -#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ -#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ +#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ +#define EM2820_R08_GPIO_CTRL 0x08 /* em2820-em2873/83 only */ +#define EM2820_R09_GPIO_STATE 0x09 /* em2820-em2873/83 only */ #define EM28XX_R06_I2C_CLK 0x06 -- 2.20.1