From bed9829f3ec4b30d5cbec6511a11368ba5f169fb Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Wed, 13 Jul 2011 09:27:29 +0000 Subject: [PATCH] tg3: Check transitions to D0 power state Currently pci_set_power_state() does not return useful return codes for transitions to the D0 power state. If a device refuses to go into D0, the PCI layer issues a warning but returns success. Entering into D0 is a requirement for correct operation of tg3 devices though. If the PCI layer should be changed to return an error code for this type of failure, the tg3 driver would be interested in catching it and reacting to it. This patch makes the necessary modifications. Signed-off-by: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/tg3.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ecbc10fed1a6..5d4283e7be7a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2657,14 +2657,19 @@ static void tg3_enable_register_access(struct tg3 *tp) static int tg3_power_up(struct tg3 *tp) { - tg3_enable_register_access(tp); + int err; - pci_set_power_state(tp->pdev, PCI_D0); + tg3_enable_register_access(tp); - /* Switch out of Vaux if it is a NIC */ - tg3_pwrsrc_switch_to_vmain(tp); + err = pci_set_power_state(tp->pdev, PCI_D0); + if (!err) { + /* Switch out of Vaux if it is a NIC */ + tg3_pwrsrc_switch_to_vmain(tp); + } else { + netdev_err(tp->dev, "Transition to D0 failed\n"); + } - return 0; + return err; } static int tg3_power_down_prepare(struct tg3 *tp) @@ -11433,8 +11438,12 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, { struct tg3 *tp = netdev_priv(dev); - if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) - tg3_power_up(tp); + if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) && + tg3_power_up(tp)) { + etest->flags |= ETH_TEST_FL_FAILED; + memset(data, 1, sizeof(u64) * TG3_NUM_TEST); + return; + } memset(data, 0, sizeof(u64) * TG3_NUM_TEST); @@ -15571,10 +15580,8 @@ static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev) } err = tg3_power_up(tp); - if (err) { - netdev_err(netdev, "Failed to restore register access.\n"); + if (err) goto done; - } rc = PCI_ERS_RESULT_RECOVERED; -- 2.20.1