From bed11db3d4095e5f818f5e8bf7f43ef2beb36d4e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Apr 2014 08:13:10 +0000 Subject: [PATCH] can: c_can: Fix startup logic c_can_start() enables interrupts way too early. The first enabling happens when setting the control mode in c_can_chip_config() and then again at the end of the function. But that happens before napi_enable() and that means that an interrupt which comes in will disable interrupts again and call napi_schedule, which ignores the request and the later napi_enable() is not making thinks work either. So the interface is up with all device interrupts disabled. Move the device interrupt after napi_enable() and add it to the other callsites of c_can_start() in c_can_set_mode() and c_can_power_up() Signed-off-by: Thomas Gleixner Tested-by: Alexander Stein Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index a5c8dcfa8357..b1629a47c03b 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -612,30 +612,22 @@ static int c_can_chip_config(struct net_device *dev) struct c_can_priv *priv = netdev_priv(dev); /* enable automatic retransmission */ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_ENABLE_AR); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR); if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { /* loopback + silent mode : useful for hot self-test */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); - priv->write_reg(priv, C_CAN_TEST_REG, - TEST_LBACK | TEST_SILENT); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { /* loopback mode : useful for self-test function */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK); } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { /* silent mode : bus-monitoring mode */ - priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE | - CONTROL_SIE | CONTROL_IE | CONTROL_TEST); + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT); - } else - /* normal mode*/ - priv->write_reg(priv, C_CAN_CTRL_REG, - CONTROL_EIE | CONTROL_SIE | CONTROL_IE); + } /* configure message objects */ c_can_configure_msg_objects(dev); @@ -662,9 +654,6 @@ static int c_can_start(struct net_device *dev) /* reset tx helper pointers */ priv->tx_next = priv->tx_echo = 0; - /* enable status change, error and module interrupts */ - c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); - return 0; } @@ -681,6 +670,7 @@ static void c_can_stop(struct net_device *dev) static int c_can_set_mode(struct net_device *dev, enum can_mode mode) { + struct c_can_priv *priv = netdev_priv(dev); int err; switch (mode) { @@ -689,6 +679,8 @@ static int c_can_set_mode(struct net_device *dev, enum can_mode mode) if (err) return err; netif_wake_queue(dev); + /* enable status change, error and module interrupts */ + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); break; default: return -EOPNOTSUPP; @@ -1184,6 +1176,8 @@ static int c_can_open(struct net_device *dev) can_led_event(dev, CAN_LED_EVENT_OPEN); napi_enable(&priv->napi); + /* enable status change, error and module interrupts */ + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); netif_start_queue(dev); return 0; @@ -1281,6 +1275,7 @@ int c_can_power_up(struct net_device *dev) u32 val; unsigned long time_out; struct c_can_priv *priv = netdev_priv(dev); + int ret; if (!(dev->flags & IFF_UP)) return 0; @@ -1307,7 +1302,11 @@ int c_can_power_up(struct net_device *dev) if (time_after(jiffies, time_out)) return -ETIMEDOUT; - return c_can_start(dev); + ret = c_can_start(dev); + if (!ret) + c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS); + + return ret; } EXPORT_SYMBOL_GPL(c_can_power_up); #endif -- 2.20.1