From be9a0067c5dca8b96b19abc41d28d4b089973c22 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 17 Sep 2012 12:09:48 +0300 Subject: [PATCH] OMAPDSS: nec-nl8048 panel: remove platform_enable/disable callbacks The nec-nl8048 panel driver now manages the gpios required to configure the panel. This was previously done in omap_dss_device's platform_enable/disable callbacks defined in board files using this panel. All the board files using this panel now pass the gpio information as platform data via the panel_nec_nl8048_data struct, which is needed by the panel driver to configure the gpios connected to the panel. Hence, the platform_enable/disable ops can be safely removed now. Signed-off-by: Archit Taneja --- .../video/omap2/displays/panel-nec-nl8048hl11-01b.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c index 3b85e2a70323..1e0097de3a23 100644 --- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c +++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c @@ -133,18 +133,11 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev) if (r) goto err0; - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - if (gpio_is_valid(pd->res_gpio)) gpio_set_value_cansleep(pd->res_gpio, 1); return 0; -err1: - omapdss_dpi_display_disable(dssdev); + err0: return r; } @@ -159,9 +152,6 @@ static void nec_8048_panel_power_off(struct omap_dss_device *dssdev) if (gpio_is_valid(pd->res_gpio)) gpio_set_value_cansleep(pd->res_gpio, 0); - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - omapdss_dpi_display_disable(dssdev); } -- 2.20.1