From bd73bfcd44c0bdcf6efa238e5b21bdbf0778d6ce Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 10 Aug 2015 16:23:11 +0200 Subject: [PATCH] USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probe As device tree support is now mandatory, merge ohci_at91_of_init() in ohci_hcd_at91_drv_probe(). Signed-off-by: Alexandre Belloni Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-at91.c | 145 +++++++++++++++-------------------- 1 file changed, 63 insertions(+), 82 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 8e17d5ba26c6..cdd91c551c7b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -449,16 +449,17 @@ static const struct of_device_id at91_ohci_dt_ids[] = { MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); -static int ohci_at91_of_init(struct platform_device *pdev) +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, gpio, ret; - enum of_gpio_flags flags; struct at91_usbh_data *pdata; - u32 ports; - - if (!np) - return 0; + int i; + int gpio; + int ret; + enum of_gpio_flags flags; + u32 ports; /* Right now device-tree probed devices don't get dma_mask set. * Since shared usb code relies on it, set it here for now. @@ -489,89 +490,69 @@ static int ohci_at91_of_init(struct platform_device *pdev) pdev->dev.platform_data = pdata; - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) -{ - struct at91_usbh_data *pdata; - int i; - int gpio; - int ret; - - ret = ohci_at91_of_init(pdev); - if (ret) - return ret; + at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } - pdata = dev_get_platdata(&pdev->dev); + if (!gpio_is_valid(pdata->vbus_pin[i])) + continue; + gpio = pdata->vbus_pin[i]; - if (pdata) { - at91_for_each_port(i) { - /* - * do not configure PIO if not in relation with - * real USB port on board - */ - if (i >= pdata->ports) { - pdata->vbus_pin[i] = -EINVAL; - pdata->overcurrent_pin[i] = -EINVAL; - break; - } + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_err(&pdev->dev, + "can't request vbus gpio %d\n", gpio); + continue; + } + ret = gpio_direction_output(gpio, + !pdata->vbus_pin_active_low[i]); + if (ret) { + dev_err(&pdev->dev, + "can't put vbus gpio %d as output %d\n", + gpio, !pdata->vbus_pin_active_low[i]); + gpio_free(gpio); + continue; + } - if (!gpio_is_valid(pdata->vbus_pin[i])) - continue; - gpio = pdata->vbus_pin[i]; + ohci_at91_usb_set_power(pdata, i, 1); + } - ret = gpio_request(gpio, "ohci_vbus"); - if (ret) { - dev_err(&pdev->dev, - "can't request vbus gpio %d\n", gpio); - continue; - } - ret = gpio_direction_output(gpio, - !pdata->vbus_pin_active_low[i]); - if (ret) { - dev_err(&pdev->dev, - "can't put vbus gpio %d as output %d\n", - gpio, !pdata->vbus_pin_active_low[i]); - gpio_free(gpio); - continue; - } + at91_for_each_port(i) { + if (!gpio_is_valid(pdata->overcurrent_pin[i])) + continue; + gpio = pdata->overcurrent_pin[i]; - ohci_at91_usb_set_power(pdata, i, 1); + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, + "can't request overcurrent gpio %d\n", + gpio); + continue; } - at91_for_each_port(i) { - if (!gpio_is_valid(pdata->overcurrent_pin[i])) - continue; - gpio = pdata->overcurrent_pin[i]; - - ret = gpio_request(gpio, "ohci_overcurrent"); - if (ret) { - dev_err(&pdev->dev, - "can't request overcurrent gpio %d\n", - gpio); - continue; - } - - ret = gpio_direction_input(gpio); - if (ret) { - dev_err(&pdev->dev, - "can't configure overcurrent gpio %d as input\n", - gpio); - gpio_free(gpio); - continue; - } + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, + "can't configure overcurrent gpio %d as input\n", + gpio); + gpio_free(gpio); + continue; + } - ret = request_irq(gpio_to_irq(gpio), - ohci_hcd_at91_overcurrent_irq, - IRQF_SHARED, "ohci_overcurrent", pdev); - if (ret) { - gpio_free(gpio); - dev_err(&pdev->dev, - "can't get gpio IRQ for overcurrent\n"); - } + ret = request_irq(gpio_to_irq(gpio), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, "ohci_overcurrent", pdev); + if (ret) { + gpio_free(gpio); + dev_err(&pdev->dev, + "can't get gpio IRQ for overcurrent\n"); } } -- 2.20.1