From bcdc9f260bdce09913db1464be9817170d51044a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 16 Feb 2016 13:06:41 +0900 Subject: [PATCH] mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case This patch fixes the MMC SPI driver from doing polling card detect when a CD GPIO that supports interrupts is specified using the gpios DT property. Without this patch the DT node below results in the following output: spi_gpio: spi-gpio { /* SD2 @ CN12 */ compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; status = "okay"; spi@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; spi-max-frequency = <25000000>; gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */ }; }; # dmesg | grep mmc mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new SDHC card on SPI mmcblk0: mmc0:0000 SU04G 3.69 GiB mmcblk0: p1 With this patch applied the "cd polling" portion above disappears. Signed-off-by: Magnus Damm Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmc_spi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 3446097a43c0..e77d79c8cd9f 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1442,6 +1442,12 @@ static int mmc_spi_probe(struct spi_device *spi) host->pdata->cd_debounce); if (status != 0) goto fail_add_host; + + /* The platform has a CD GPIO signal that may support + * interrupts, so let mmc_gpiod_request_cd_irq() decide + * if polling is needed or not. + */ + mmc->caps &= ~MMC_CAP_NEEDS_POLL; mmc_gpiod_request_cd_irq(mmc); } -- 2.20.1