From bc6d5d7666b73cbd8d6ed6ee3aece84903fffe0b Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Mon, 24 Apr 2017 09:12:17 +0800 Subject: [PATCH] ARM: dts: at91: sama5d2: add m_can nodes Add nodes to support the Controller Area Network(M_CAN) on SAMA5D2. The version of M_CAN IP core is 3.1.0 (CREL = 0x31040730). As said in SAMA5D2 datasheet, the CAN clock is recommended to use frequencies of 20, 40 or 80 MHz. To achieve these frequencies, PMC GCLK3 must select the UPLLCK(480 MHz) as source clock and divide by 24, 12, or 6. So, the "assigned-clock-rates" property has three options: 20000000, 40000000, and 80000000. The "assigned-clock-parents" property should be referred to utmi fixedly. The MSBs [bits 31:16] of the CAN Message RAM for CAN0 and CAN1 are default configured in 0x00200000. To avoid conflict with SRAM map for PM, change them to 0x00210000 in the AT91Bootstrap via setting the CAN Memories Address-based Register(SFR_CAN) of SFR. Signed-off-by: Wenyou Yang Tested-by: Quentin Schulz Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 24 +++++++++ arch/arm/boot/dts/sama5d2.dtsi | 56 +++++++++++++++++++++ 2 files changed, 80 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0bef9e0b89c6..37de94fc9b5a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -258,6 +258,12 @@ status = "okay"; }; + can0: can@f8054000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; + }; + uart3: serial@fc008000 { atmel,use-dma-rx; atmel,use-dma-tx; @@ -322,6 +328,18 @@ bias-disable; }; + pinctrl_can0_default: can0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = , + ; + bias-disable; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = ; bias-disable; @@ -469,6 +487,12 @@ }; }; + + can1: can@fc050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 8067c71c3a38..ce95dcb8bdf9 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -762,6 +762,18 @@ atmel,clk-output-range = <0 83000000>; }; + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 83000000>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -890,6 +902,18 @@ #clock-cells = <0>; reg = <55>; }; + + can0_gclk: can0_gclk { + #clock-cells = <0>; + reg = <56>; + atmel,clk-output-range = <0 80000000>; + }; + + can1_gclk: can1_gclk { + #clock-cells = <0>; + reg = <57>; + atmel,clk-output-range = <0 80000000>; + }; }; }; @@ -1144,6 +1168,22 @@ clocks = <&clk32k>; }; + can0: can@f8054000 { + compatible = "bosch,m_can"; + reg = <0xf8054000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, + <64 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can0_clk>, <&can0_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can0_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + spi1: spi@fc000000 { compatible = "atmel,at91rm9200-spi"; reg = <0xfc000000 0x100>; @@ -1305,6 +1345,22 @@ status = "okay"; }; + can1: can@fc050000 { + compatible = "bosch,m_can"; + reg = <0xfc050000 0x4000>, <0x210000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, + <65 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-names = "int0", "int1"; + clocks = <&can1_clk>, <&can1_gclk>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&can1_gclk>; + assigned-clock-parents = <&utmi>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>; + status = "disabled"; + }; + sfrbu: sfr@fc05c000 { compatible = "atmel,sama5d2-sfrbu", "syscon"; reg = <0xfc05c000 0x20>; -- 2.20.1