From bbef6c0ce8046114c07f5b6a62ce6a239503dd61 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:01:09 -0600 Subject: [PATCH] [SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns Some distros have a "rescan-scsi-bus.sh" script which depends on SCSI REPORT LUNs not reporting something different than what the driver tells the kernel, even if the driver uses scan_start and scan_finished methods of the SCSI host template to override the usual SCSI midlayer discovery code. Previously, 1 was added to the LUN to make room to insert the RAID controller device at LUN 0. Now, the RAID controller is moved to bus 3, and 1 is no longer added to the LUN. However, SCSI REPORT LUNS on Smart Array doesn't report physical devices like tape drives or auto-loaders as it turns out, so those particular device types still won't match. Generally the logical drives are reported first however, so at least those should match. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 25 +++++-------------------- 1 file changed, 5 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 4e7df2e5701e..264c1764befe 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1647,30 +1647,15 @@ static void figure_bus_target_lun(struct ctlr_info *h, *target = (lunid >> 16) & 0x3fff; *lun = lunid & 0x00ff; } else { - if (likely(is_scsi_rev_5(h))) { - /* All current smart arrays (circa 2011) */ - *bus = 0; - *target = 0; - *lun = (lunid & 0x3fff) + 1; - } else { - /* Traditional old smart array way. */ - *bus = 0; - *target = lunid & 0x3fff; - *lun = 0; - } + *bus = 0; + *target = 0; + *lun = (lunid & 0x3fff); } } else { - /* physical device */ if (is_hba_lunid(lunaddrbytes)) - if (unlikely(is_scsi_rev_5(h))) { - *bus = 0; /* put p1210m ctlr at 0,0,0 */ - *target = 0; - *lun = 0; - return; - } else - *bus = 3; /* traditional smartarray */ + *bus = 3; /* controller */ else - *bus = 2; /* physical disk */ + *bus = 2; /* physical device */ *target = -1; *lun = -1; /* we will fill these in later. */ } -- 2.20.1