From bac135da21878282bf1368cdd26c542db731743e Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 28 Aug 2017 16:29:14 +0200 Subject: [PATCH] mmc: meson-gx: change default tx phase Initial default tx phase was set to 0 while the datasheet recommends 270. Some cards fails to initialize with this setting and eMMC mode DDR52 does not work. Changing this setting to 270 fixes these issues, without any regression so far Reviewed-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 0cffc705bfe3..efffd36c8d77 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -1156,8 +1156,14 @@ static int meson_mmc_probe(struct platform_device *pdev) if (ret) goto free_host; + /* + * Set phases : These values are mostly the datasheet recommended ones + * except for the Tx phase. Datasheet recommends 180 but some cards + * fail at initialisation with it. 270 works just fine, it fixes these + * initialisation issues and enable eMMC DDR52 mode. + */ host->tp.core_phase = 180; - host->tp.tx_phase = 0; + host->tp.tx_phase = 270; host->tp.rx_phase = 0; ret = meson_mmc_clk_init(host); -- 2.20.1