From bab263e0ce624b05bdcf568e83a9ca4ce71f5e3d Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Sun, 5 Dec 2010 12:49:03 +0100 Subject: [PATCH] ux500: Add eMMC support in U5500. U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/board-u5500-sdi.c | 49 ++++++++++++++++++++++++ arch/arm/mach-ux500/board-u5500.c | 3 +- arch/arm/mach-ux500/clock.c | 2 + arch/arm/mach-ux500/include/mach/setup.h | 3 ++ 5 files changed, 57 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-ux500/board-u5500-sdi.c diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 061201388dac..fb65e598bffb 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -6,7 +6,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o -obj-$(CONFIG_MACH_U5500) += board-u5500.o +obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c new file mode 100644 index 000000000000..54712acc0394 --- /dev/null +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Hanumath Prasad + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include + +#include +#include +#include + +#include "pins-db5500.h" +#include "devices-db5500.h" +#include "ste-dma40-db5500.h" + +static pin_cfg_t u5500_sdi_pins[] = { + /* SDI0 (POP eMMC) */ + GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, +}; + +static struct mmci_platform_data u5500_sdi0_data = { + .ocr_mask = MMC_VDD_165_195, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +void __init u5500_sdi_init(void) +{ + nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); + + db5500_add_sdi0(&u5500_sdi0_data); +} diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 9a5db956deba..39d370c1f3b4 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -31,10 +31,11 @@ static void __init u5500_init_machine(void) { u5500_init_devices(); + u5500_sdi_init(); u5500_uart_init(); } -MACHINE_START(U8500, "ST-Ericsson U5500 Platform") +MACHINE_START(U5500, "ST-Ericsson U5500 Platform") .boot_params = 0x00000100, .map_io = u5500_map_io, .init_irq = ux500_init_irq, diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 3d4e8eb403ba..598902da31d8 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -579,6 +579,8 @@ int __init clk_init(void) clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; clk_per6clk.rate = 26000000; + clk_uartclk.rate = 36360000; + clk_sdmmcclk.rate = 99900000; } clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 322a1c1f2bae..22788a7d35dc 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -22,6 +22,9 @@ extern void __init u5500_init_devices(void); extern void __init u8500_init_devices(void); extern void __init ux500_init_irq(void); + +extern void __init u5500_sdi_init(void); + /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); -- 2.20.1