From baa9ae3cfdf8ca2cb019c02c0a9e16f63cdd0260 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 8 May 2011 10:48:01 -0700 Subject: [PATCH] mtd: m25p80: Add Spansion S25FL256S These are 32MiB parts which use a slightly different 4-byte enable sequence from Macronix. Default to the Spansion 4-byte scheme in set_4byte(), as it is more likely to be copied by other vendors. Signed-off-by: Kevin Cernekee Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 16adfaa78018..e050cc8b3ee7 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -56,6 +56,9 @@ #define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ #define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ +/* Used for Spansion flashes only. */ +#define OPCODE_BRWR 0x17 /* Bank register write */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -161,11 +164,18 @@ static inline int write_disable(struct m25p *flash) /* * Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct m25p *flash, int enable) +static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { - u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B; - - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_MACRONIX: + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; + return spi_write(flash->spi, flash->command, 1); + default: + /* Spansion style */ + flash->command[0] = OPCODE_BRWR; + flash->command[1] = enable << 7; + return spi_write(flash->spi, flash->command, 2); + } } /* @@ -688,6 +698,8 @@ static const struct spi_device_id m25p_ids[] = { { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SECT_4K) }, { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, @@ -921,7 +933,7 @@ static int __devinit m25p_probe(struct spi_device *spi) /* enable 4-byte addressing if the device exceeds 16MiB */ if (flash->mtd.size > 0x1000000) { flash->addr_width = 4; - set_4byte(flash, 1); + set_4byte(flash, info->jedec_id, 1); } else flash->addr_width = 3; } -- 2.20.1