From b9df794258de24d10b0616634d4c30d8b6e9d381 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Tue, 19 Jan 2010 16:31:31 +0800 Subject: [PATCH] USB: ehci: phy low power mode bug fixing 1. There are two msleep calls inside two spin lock sections, need to unlock and lock again after msleep. 2. Save a extra status reg setting. Signed-off-by: Alek Du Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c75d9270c752..19372673bf09 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -196,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -904,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); -- 2.20.1