From b8ce33590687888ebb900d09557b8807c4539022 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 12 Oct 2007 23:04:07 +0200 Subject: [PATCH] x86_64: convert to clock events Finally switch to the clockevents code. Share code with i386 for hpet and PIT. Signed-off-by: Thomas Gleixner Signed-off-by: Chris Wright Signed-off-by: Ingo Molnar Signed-off-by: Arjan van de Ven --- arch/x86/kernel/Makefile_64 | 4 +- arch/x86/kernel/apic_64.c | 90 ++++++++++++++++------------- arch/x86/kernel/i8259_64.c | 46 --------------- arch/x86/kernel/smpboot_64.c | 4 -- arch/x86/kernel/time_64.c | 107 +++++------------------------------ arch/x86_64/Kconfig | 6 +- include/asm-x86/hpet.h | 92 ++++++++++++++++++++++++++++-- include/asm-x86/hpet_32.h | 90 ----------------------------- include/asm-x86/hpet_64.h | 18 ------ 9 files changed, 158 insertions(+), 299 deletions(-) delete mode 100644 include/asm-x86/hpet_32.h delete mode 100644 include/asm-x86/hpet_64.h diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 index 3ab017a0a3b9..080154e31502 100644 --- a/arch/x86/kernel/Makefile_64 +++ b/arch/x86/kernel/Makefile_64 @@ -8,8 +8,8 @@ obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \ - pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \ - perfctr-watchdog.o + pci-dma_64.o pci-nommu_64.o alternative.o hpet_32.o tsc_64.o bugs_64.o \ + perfctr-watchdog.o i8253_32.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 2c2807abe1d4..b0237caff712 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -857,25 +857,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) static void setup_APIC_timer(void) { - unsigned long flags; - int irqen; + struct clock_event_device *levt = &__get_cpu_var(lapic_events); - local_irq_save(flags); + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); - irqen = ! cpu_isset(smp_processor_id(), - timer_interrupt_broadcast_ipi_mask); - __setup_APIC_LVTT(calibration_result, 0, irqen); - /* Turn off PIT interrupt if we use APIC timer as main timer. - Only works with the PM timer right now - TBD fix it for HPET too. */ - if ((pmtmr_ioport != 0) && - smp_processor_id() == boot_cpu_id && - apic_runs_main_timer == 1 && - !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { - stop_timer_interrupt(); - apic_runs_main_timer++; - } - local_irq_restore(flags); + clockevents_register_device(levt); } /* @@ -950,18 +937,34 @@ static void __init calibrate_APIC_clock(void) void __init setup_boot_APIC_clock (void) { + /* + * The local apic timer can be disabled via the kernel commandline. + * Register the lapic timer as a dummy clock event source on SMP + * systems, so the broadcast mechanism is used. On UP systems simply + * ignore it. + */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); return; } printk(KERN_INFO "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - calibrate_APIC_clock(); + /* - * Now set up the timer for real. + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. */ + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=1!\n"); + setup_APIC_timer(); } @@ -1073,22 +1076,34 @@ void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, void smp_local_timer_interrupt(void) { - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id) - main_timer_handler(); + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); + /* - * We take the 'long' return path, and there every subsystem - * grabs the appropriate locks (kernel lock/ irq lock). - * - * We might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + /* + * the NMI deadlock-detector uses this. + */ + add_pda(apic_timer_irqs, 1); + + evt->event_handler(evt); } /* @@ -1103,11 +1118,6 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); - /* - * the NMI deadlock-detector uses this. - */ - add_pda(apic_timer_irqs, 1); - /* * NOTE! We'd better ACK the irq immediately, * because timer handling can be slow. @@ -1291,7 +1301,7 @@ static __init int setup_noapictimer(char *str) static __init int setup_apicmaintimer(char *str) { apic_runs_main_timer = 1; - nohpet = 1; + return 1; } __setup("apicmaintimer", setup_apicmaintimer); @@ -1307,7 +1317,7 @@ static __init int setup_apicpmtimer(char *s) { apic_calibrate_pmtmr = 1; notsc_setup(NULL); - return setup_apicmaintimer(NULL); + return 0; } __setup("apicpmtimer", setup_apicpmtimer); diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 948cae646099..eb72976cc13c 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -444,46 +444,6 @@ void __init init_ISA_irqs (void) } } -static void setup_timer_hardware(void) -{ - outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , 0x40); /* LSB */ - udelay(10); - outb(LATCH >> 8 , 0x40); /* MSB */ -} - -static int timer_resume(struct sys_device *dev) -{ - setup_timer_hardware(); - return 0; -} - -void i8254_timer_resume(void) -{ - setup_timer_hardware(); -} - -static struct sysdev_class timer_sysclass = { - set_kset_name("timer_pit"), - .resume = timer_resume, -}; - -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int __init init_timer_sysfs(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(init_timer_sysfs); - void __init init_IRQ(void) { int i; @@ -533,12 +493,6 @@ void __init init_IRQ(void) set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - /* - * Set the clock to HZ Hz, we already have a valid - * vector now: - */ - setup_timer_hardware(); - if (!acpi_ioapic) setup_irq(2, &irq2); } diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c index 32f50783edc8..57ccf7cb6b91 100644 --- a/arch/x86/kernel/smpboot_64.c +++ b/arch/x86/kernel/smpboot_64.c @@ -223,8 +223,6 @@ void __cpuinit smp_callin(void) local_irq_disable(); Dprintk("Stack at about %p\n",&cpuid); - disable_APIC_timer(); - /* * Save our processor parameters */ @@ -348,8 +346,6 @@ void __cpuinit start_secondary(void) enable_8259A_irq(0); } - enable_APIC_timer(); - /* * The sibling maps must be set before turing the online map on for * this cpu diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c index d899216e01ca..7781df1d50e3 100644 --- a/arch/x86/kernel/time_64.c +++ b/arch/x86/kernel/time_64.c @@ -28,6 +28,8 @@ #include #include #include +#include + #ifdef CONFIG_ACPI #include /* for PM timer frequency */ #include @@ -46,12 +48,8 @@ #include #include -static char *timename = NULL; - DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; @@ -194,6 +192,13 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t timer_event_interrupt(int irq, void *dev_id) +{ + global_clock_event->event_handler(global_clock_event); + + return IRQ_HANDLED; +} + unsigned long read_persistent_clock(void) { unsigned int year, mon, day, hour, min, sec; @@ -291,42 +296,8 @@ static unsigned int __init tsc_calibrate_cpu_khz(void) return pmc_now * tsc_khz / (tsc_now - tsc_start); } -static void __pit_init(int val, u8 mode) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(mode, PIT_MODE); - outb_p(val & 0xff, PIT_CH0); /* LSB */ - outb_p(val >> 8, PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); -} - -void __init pit_init(void) -{ - __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */ -} - -void pit_stop_interrupt(void) -{ - __pit_init(0, 0x30); /* mode 0 */ -} - -void stop_timer_interrupt(void) -{ - char *name; - if (hpet_address) { - name = "HPET"; - hpet_timer_stop_set_go(0); - } else { - name = "PIT"; - pit_stop_interrupt(); - } - printk(KERN_INFO "timer: %s interrupt stopped.\n", name); -} - static struct irqaction irq0 = { - .handler = timer_interrupt, + .handler = timer_event_interrupt, .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING, .mask = CPU_MASK_NONE, .name = "timer" @@ -334,20 +305,10 @@ static struct irqaction irq0 = { void __init time_init(void) { - if (nohpet) - hpet_address = 0; - - if (hpet_arch_init()) - hpet_address = 0; + if (!hpet_enable()) + setup_pit_timer(); - if (hpet_use_timer) { - /* set tick_nsec to use the proper rate for HPET */ - tick_nsec = TICK_NSEC_HPET; - timename = "HPET"; - } else { - pit_init(); - timename = "PIT"; - } + setup_irq(0, &irq0); tsc_calibrate(); @@ -369,46 +330,4 @@ void __init time_init(void) printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); init_tsc_clocksource(); - - setup_irq(0, &irq0); -} - -/* - * sysfs support for the timer. - */ - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - return 0; } - -static int timer_resume(struct sys_device *dev) -{ - if (hpet_address) - hpet_reenable(); - else - i8254_timer_resume(); - return 0; -} - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - .suspend = timer_suspend, - set_kset_name("timer"), -}; - -/* XXX this sysfs stuff should probably go elsewhere later -john */ -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(time_init_device); diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index a9534c21c306..eb80f5aca54e 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -40,7 +40,11 @@ config CLOCKSOURCE_WATCHDOG bool default y -config GENERIC_CLOCKEVENTS_MIGR +config GENERIC_CLOCKEVENTS + bool + default y + +config GENERIC_CLOCKEVENTS_BROADCAST bool default y diff --git a/include/asm-x86/hpet.h b/include/asm-x86/hpet.h index 9eff48601254..e2976ed30b70 100644 --- a/include/asm-x86/hpet.h +++ b/include/asm-x86/hpet.h @@ -1,5 +1,89 @@ -#ifdef CONFIG_X86_32 -# include "hpet_32.h" +#ifndef ASM_X86_HPET_H +#define ASM_X86_HPET_H + +#ifdef CONFIG_HPET_TIMER + +/* + * Documentation on HPET can be found at: + * http://www.intel.com/ial/home/sp/pcmmspec.htm + * ftp://download.intel.com/ial/home/sp/mmts098.pdf + */ + +#define HPET_MMAP_SIZE 1024 + +#define HPET_ID 0x000 +#define HPET_PERIOD 0x004 +#define HPET_CFG 0x010 +#define HPET_STATUS 0x020 +#define HPET_COUNTER 0x0f0 +#define HPET_T0_CFG 0x100 +#define HPET_T0_CMP 0x108 +#define HPET_T0_ROUTE 0x110 +#define HPET_T1_CFG 0x120 +#define HPET_T1_CMP 0x128 +#define HPET_T1_ROUTE 0x130 +#define HPET_T2_CFG 0x140 +#define HPET_T2_CMP 0x148 +#define HPET_T2_ROUTE 0x150 + +#define HPET_ID_REV 0x000000ff +#define HPET_ID_NUMBER 0x00001f00 +#define HPET_ID_64BIT 0x00002000 +#define HPET_ID_LEGSUP 0x00008000 +#define HPET_ID_VENDOR 0xffff0000 +#define HPET_ID_NUMBER_SHIFT 8 +#define HPET_ID_VENDOR_SHIFT 16 + +#define HPET_ID_VENDOR_8086 0x8086 + +#define HPET_CFG_ENABLE 0x001 +#define HPET_CFG_LEGACY 0x002 +#define HPET_LEGACY_8254 2 +#define HPET_LEGACY_RTC 8 + +#define HPET_TN_LEVEL 0x0002 +#define HPET_TN_ENABLE 0x0004 +#define HPET_TN_PERIODIC 0x0008 +#define HPET_TN_PERIODIC_CAP 0x0010 +#define HPET_TN_64BIT_CAP 0x0020 +#define HPET_TN_SETVAL 0x0040 +#define HPET_TN_32BIT 0x0100 +#define HPET_TN_ROUTE 0x3e00 +#define HPET_TN_FSB 0x4000 +#define HPET_TN_FSB_CAP 0x8000 +#define HPET_TN_ROUTE_SHIFT 9 + +/* Max HPET Period is 10^8 femto sec as in HPET spec */ +#define HPET_MAX_PERIOD 100000000UL +/* + * Min HPET period is 10^5 femto sec just for safety. If it is less than this, + * then 32 bit HPET counter wrapsaround in less than 0.5 sec. + */ +#define HPET_MIN_PERIOD 100000UL + +/* hpet memory map physical address */ +extern unsigned long hpet_address; +extern int is_hpet_enabled(void); +extern int hpet_enable(void); + +#ifdef CONFIG_HPET_EMULATE_RTC + +#include + +extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); +extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec); +extern int hpet_set_periodic_freq(unsigned long freq); +extern int hpet_rtc_dropped_irq(void); +extern int hpet_rtc_timer_init(void); +extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); + +#endif /* CONFIG_HPET_EMULATE_RTC */ + #else -# include "hpet_64.h" -#endif + +static inline int hpet_enable(void) { return 0; } + +#endif /* CONFIG_HPET_TIMER */ +#endif /* ASM_X86_HPET_H */ diff --git a/include/asm-x86/hpet_32.h b/include/asm-x86/hpet_32.h deleted file mode 100644 index c82dc7ed96b3..000000000000 --- a/include/asm-x86/hpet_32.h +++ /dev/null @@ -1,90 +0,0 @@ - -#ifndef _I386_HPET_H -#define _I386_HPET_H - -#ifdef CONFIG_HPET_TIMER - -/* - * Documentation on HPET can be found at: - * http://www.intel.com/ial/home/sp/pcmmspec.htm - * ftp://download.intel.com/ial/home/sp/mmts098.pdf - */ - -#define HPET_MMAP_SIZE 1024 - -#define HPET_ID 0x000 -#define HPET_PERIOD 0x004 -#define HPET_CFG 0x010 -#define HPET_STATUS 0x020 -#define HPET_COUNTER 0x0f0 -#define HPET_T0_CFG 0x100 -#define HPET_T0_CMP 0x108 -#define HPET_T0_ROUTE 0x110 -#define HPET_T1_CFG 0x120 -#define HPET_T1_CMP 0x128 -#define HPET_T1_ROUTE 0x130 -#define HPET_T2_CFG 0x140 -#define HPET_T2_CMP 0x148 -#define HPET_T2_ROUTE 0x150 - -#define HPET_ID_REV 0x000000ff -#define HPET_ID_NUMBER 0x00001f00 -#define HPET_ID_64BIT 0x00002000 -#define HPET_ID_LEGSUP 0x00008000 -#define HPET_ID_VENDOR 0xffff0000 -#define HPET_ID_NUMBER_SHIFT 8 -#define HPET_ID_VENDOR_SHIFT 16 - -#define HPET_ID_VENDOR_8086 0x8086 - -#define HPET_CFG_ENABLE 0x001 -#define HPET_CFG_LEGACY 0x002 -#define HPET_LEGACY_8254 2 -#define HPET_LEGACY_RTC 8 - -#define HPET_TN_LEVEL 0x0002 -#define HPET_TN_ENABLE 0x0004 -#define HPET_TN_PERIODIC 0x0008 -#define HPET_TN_PERIODIC_CAP 0x0010 -#define HPET_TN_64BIT_CAP 0x0020 -#define HPET_TN_SETVAL 0x0040 -#define HPET_TN_32BIT 0x0100 -#define HPET_TN_ROUTE 0x3e00 -#define HPET_TN_FSB 0x4000 -#define HPET_TN_FSB_CAP 0x8000 -#define HPET_TN_ROUTE_SHIFT 9 - -/* Max HPET Period is 10^8 femto sec as in HPET spec */ -#define HPET_MAX_PERIOD 100000000UL -/* - * Min HPET period is 10^5 femto sec just for safety. If it is less than this, - * then 32 bit HPET counter wrapsaround in less than 0.5 sec. - */ -#define HPET_MIN_PERIOD 100000UL - -/* hpet memory map physical address */ -extern unsigned long hpet_address; -extern int is_hpet_enabled(void); -extern int hpet_enable(void); - -#ifdef CONFIG_HPET_EMULATE_RTC - -#include - -extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask); -extern int hpet_set_rtc_irq_bit(unsigned long bit_mask); -extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, - unsigned char sec); -extern int hpet_set_periodic_freq(unsigned long freq); -extern int hpet_rtc_dropped_irq(void); -extern int hpet_rtc_timer_init(void); -extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); - -#endif /* CONFIG_HPET_EMULATE_RTC */ - -#else - -static inline int hpet_enable(void) { return 0; } - -#endif /* CONFIG_HPET_TIMER */ -#endif /* _I386_HPET_H */ diff --git a/include/asm-x86/hpet_64.h b/include/asm-x86/hpet_64.h deleted file mode 100644 index fd4decac93a8..000000000000 --- a/include/asm-x86/hpet_64.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_X8664_HPET_H -#define _ASM_X8664_HPET_H 1 - -#include - -#define HPET_TICK_RATE (HZ * 100000UL) - -extern int hpet_rtc_timer_init(void); -extern int hpet_arch_init(void); -extern int hpet_timer_stop_set_go(unsigned long tick); -extern int hpet_reenable(void); -extern unsigned int hpet_calibrate_tsc(void); - -extern int hpet_use_timer; -extern unsigned long hpet_period; -extern unsigned long hpet_tick; - -#endif -- 2.20.1