From b7c563c489e94417efbad68d057ea5d2030ae44c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 29 Mar 2017 17:22:44 +0200 Subject: [PATCH] clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 R-Car V2H and E2 do not have the PLL0CR register, but use a fixed multiplier (depending on mode pins) and divider. This corrects the clock rate of "pll0" (PLL0 VCO after post divider) on R-Car V2H and E2 from 1.5 GHz to 1 GHz. Inspired by Sergei Shtylyov's work for the common R-Car Gen2 and RZ/G Clock Pulse Generator support core. Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree") Fixes: 0dce5454d5c25858 ("ARM: shmobile: Initial r8a7794 SoC device tree") Signed-off-by: Geert Uytterhoeven --- drivers/clk/renesas/clk-rcar-gen2.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c index f39519edc645..51a2479ed5d7 100644 --- a/drivers/clk/renesas/clk-rcar-gen2.c +++ b/drivers/clk/renesas/clk-rcar-gen2.c @@ -272,11 +272,14 @@ struct cpg_pll_config { unsigned int extal_div; unsigned int pll1_mult; unsigned int pll3_mult; + unsigned int pll0_mult; /* For R-Car V2H and E2 only */ }; static const struct cpg_pll_config cpg_pll_configs[8] __initconst = { - { 1, 208, 106 }, { 1, 208, 88 }, { 1, 156, 80 }, { 1, 156, 66 }, - { 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208, 88 }, + { 1, 208, 106, 200 }, { 1, 208, 88, 200 }, + { 1, 156, 80, 150 }, { 1, 156, 66, 150 }, + { 2, 240, 122, 230 }, { 2, 240, 102, 230 }, + { 2, 208, 106, 200 }, { 2, 208, 88, 200 }, }; /* SDHI divisors */ @@ -298,6 +301,12 @@ static const struct clk_div_table cpg_sd01_div_table[] = { static u32 cpg_mode __initdata; +static const char * const pll0_mult_match[] = { + "renesas,r8a7792-cpg-clocks", + "renesas,r8a7794-cpg-clocks", + NULL +}; + static struct clk * __init rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, const struct cpg_pll_config *config, @@ -318,9 +327,15 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, * clock implementation and we currently have no need to change * the multiplier value. */ - u32 value = clk_readl(cpg->reg + CPG_PLL0CR); + if (of_device_compatible_match(np, pll0_mult_match)) { + /* R-Car V2H and E2 do not have PLL0CR */ + mult = config->pll0_mult; + div = 3; + } else { + u32 value = clk_readl(cpg->reg + CPG_PLL0CR); + mult = ((value >> 24) & ((1 << 7) - 1)) + 1; + } parent_name = "main"; - mult = ((value >> 24) & ((1 << 7) - 1)) + 1; } else if (!strcmp(name, "pll1")) { parent_name = "main"; mult = config->pll1_mult / 2; -- 2.20.1