From b77f47e78982807286f6fdb4c39f9e798606dace Mon Sep 17 00:00:00 2001 From: Stephane Viau Date: Fri, 6 Jun 2014 10:03:32 -0400 Subject: [PATCH] drm/msm/hdmi: set hdp clock rate before prepare_enable The clock driver usually complains when a clock is being prepared before setting its rate. It is the case here for "core_clk" which needs to be set at 19.2 MHz before we attempt a prepare_enable(). Signed-off-by: Stephane Viau Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/hdmi/hdmi.c | 2 ++ drivers/gpu/drm/msm/hdmi/hdmi.h | 1 + drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 8 ++++++++ 3 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c index ae750f6928c1..7f7aadef8a82 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c @@ -277,6 +277,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"}; static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"}; static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"}; + static unsigned long hpd_clk_freq[] = {0, 19200000, 0}; static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"}; config.phy_init = hdmi_phy_8x74_init; @@ -286,6 +287,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) config.pwr_reg_names = pwr_reg_names; config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names); config.hpd_clk_names = hpd_clk_names; + config.hpd_freq = hpd_clk_freq; config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names); config.pwr_clk_names = pwr_clk_names; config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names); diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h index 9fafee6a3e43..9d7723c6528a 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.h +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h @@ -87,6 +87,7 @@ struct hdmi_platform_config { /* clks that need to be on for hpd: */ const char **hpd_clk_names; + const long unsigned *hpd_freq; int hpd_clk_cnt; /* clks that need to be on for screen pwr (ie pixel clk): */ diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c index e56a6196867c..28f7e3ec6c28 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c @@ -127,6 +127,14 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector) } for (i = 0; i < config->hpd_clk_cnt; i++) { + if (config->hpd_freq && config->hpd_freq[i]) { + ret = clk_set_rate(hdmi->hpd_clks[i], + config->hpd_freq[i]); + if (ret) + dev_warn(dev->dev, "failed to set clk %s (%d)\n", + config->hpd_clk_names[i], ret); + } + ret = clk_prepare_enable(hdmi->hpd_clks[i]); if (ret) { dev_err(dev->dev, "failed to enable hpd clk: %s (%d)\n", -- 2.20.1