From b76baa8154335a906be85f2b32d6bd1876900133 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 9 Nov 2012 09:44:43 +0800 Subject: [PATCH] usb: refine phy notify operation during connection and disconnection At commit 925aa46ba963a4da6d8ee6ab1d04a02ffa8db62b, Richard Zhao adds the phy notification callback when port change occurs. In fact, this phy notification should be added according to below rules: 1. Only set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during high speed host mode. 2. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during the reset and speed negotiation period. 3. Do not set HW_USBPHY_CTRL.ENHOSTDISCONDETECT during host suspend/resume sequence. Please refer: i.mx23RM(page: 413) for below rules. http://www.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf Freescale i.MX SoC, i.mx23, i.mx28 and i.mx6(i.mx6SL does not need to follow the 3rd rule) need to follow above rules. Current code set connect notification (HW_USBPHY_CTRL.ENHOSTDISCONDETECT) at hub_port_connect_change, it conflicts with above the 2th rule. The correct notification setting method should be: 1. Set connect notify after the second bus reset. 2. Set disconnect notify after disconnection. Signed-off-by: Peter Chen Tested-by: Mike Thompson Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 90accdefdc7d..8391538d688b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4038,6 +4038,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + if (hcd->phy && !hdev->parent) + usb_phy_notify_connect(hcd->phy, port1); + /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4232,8 +4235,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } /* Disconnect any existing devices under this port */ - if (udev) + if (udev) { + if (hcd->phy && !hdev->parent && + !(portstatus & USB_PORT_STAT_CONNECTION)) + usb_phy_notify_disconnect(hcd->phy, port1); usb_disconnect(&hub->ports[port1 - 1]->child); + } clear_bit(port1, hub->change_bits); /* We can forget about a "removed" device when there's a physical @@ -4256,13 +4263,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - if (hcd->phy && !hdev->parent) { - if (portstatus & USB_PORT_STAT_CONNECTION) - usb_phy_notify_connect(hcd->phy, port1); - else - usb_phy_notify_disconnect(hcd->phy, port1); - } - /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ -- 2.20.1