From b74a7e50cc87dea1b86d35860ace81412cb49886 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 30 Jan 2008 12:46:19 -0600 Subject: [PATCH] [POWERPC] 83xx: configure USB clock for MPC8315E SCCR USB bits are in a different location on the mpc8315. Signed-off-by: Jerry Huang Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8315erdb.dts | 2 +- arch/powerpc/platforms/83xx/mpc83xx.h | 2 ++ arch/powerpc/platforms/83xx/usb.c | 17 +++++++++++++---- 3 files changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index b582032ba3d6..d7a1ececa30f 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -96,7 +96,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - compatible = "simple-bus"; + compatible = "fsl,mpc8315-immr", "simple-bus"; ranges = <0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 88bb748aff0d..68065e62fc3d 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -14,6 +14,8 @@ #define MPC83XX_SCCR_USB_DRCM_11 0x00300000 #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 +#define MPC8315_SCCR_USB_MASK 0x00c00000 +#define MPC8315_SCCR_USB_DRCM_11 0x00c00000 #define MPC837X_SCCR_USB_DRCM_11 0x00c00000 /* system i/o configuration register low */ diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 681230a30acd..471fdd8f4108 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -104,6 +104,7 @@ int mpc831x_usb_cfg(void) u32 temp; void __iomem *immap, *usb_regs; struct device_node *np = NULL; + struct device_node *immr_node = NULL; const void *prop; struct resource res; int ret = 0; @@ -124,10 +125,15 @@ int mpc831x_usb_cfg(void) } /* Configure clock */ - temp = in_be32(immap + MPC83XX_SCCR_OFFS); - temp &= ~MPC83XX_SCCR_USB_MASK; - temp |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, temp); + immr_node = of_get_parent(np); + if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, + MPC8315_SCCR_USB_MASK, + MPC8315_SCCR_USB_DRCM_11); + else + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, + MPC83XX_SCCR_USB_MASK, + MPC83XX_SCCR_USB_DRCM_11); /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { @@ -144,6 +150,9 @@ int mpc831x_usb_cfg(void) iounmap(immap); + if (immr_node) + of_node_put(immr_node); + /* Map USB SOC space */ ret = of_address_to_resource(np, 0, &res); if (ret) { -- 2.20.1